Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹29.9 L
EMD Value
₹59,900
Closing Date
27 Nov 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE Dinjan No 2
GE Dinjan No 2 Post Dinjan Dist Tinsukia Assam Pin 786 189
REPAIR/MAINTENANCE OF CERTAIN B/R WKS IN E/M INSTALLATIONS AND REPAIR/MAINTENANCE OF LT UG CABLE AND CONNECTED ITEMS AT MIL STN LEKHAPANI UNDER GE DINJAN NO.2
2026_MES_797642_1
8011/E8
Open Tender
Civil Works
Item Rate
180 days
As per NIT
Pls Refer Tender Documents
9 documents required · 9 mandatory
₹500
GE DINJAN NO.2
₹59,900
Yes
6 Nov 2026
6 Nov 2026
5 Dec 2026
6 Nov 2026
27 Nov 2026
20 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling timber scantlings in unframed timber work 40 sq.cm and over in section, in any position complete all as specified and as directed by Engineer in Charge. | 3 | Cum | - | - |
| - | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer in Charge. | 8.9 | Qtl | - | - |
| - | Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and as directed by Engineer in Charge. | 130 | Sqm | - | - |
| - | M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed by Engineer in Charge. | 90 | Sqm | - | - |
| - | M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves/(Note : for Making " C" Shape size 150x150x150mm Drain on roof Sheet slop both side for rainwater Management) boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed by Engineer in Charge. | 40 | Sqm | - | - |
| - | S& F in repair wire netting of stainless (size of mess is 25 mm) steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples complete all as specified and as directed by Engineer in Charge. | 50 | Sqm | - | - |
| - | Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer in Charge. | 2.97 | Cum | - | - |
| - | M&L for PCC 1:2:4 Type B2 (using 12.5 mm graded aggregate) as in mass concrete for hume pipe foundations, filling and mass concrete complete all as specified and as directed by Engineer in Charge. | 0.97 | Cum | - | - |
| - | S& F Mild steel angle Iron hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 .(As per TD Drg No CESZTD/112) complete all as specified and as directed by Engineer in Charge. | 200 | Kg | - | - |
| - | S&F 12mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed by Engineer in Charge. | 20 | Kg | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
BOQ_894760.xls
BOQ • 8.15 MB
TENDER-8011.pdf
Tender Documents • 1.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .