Interior Renovation work of Balbharati Office,Main Building, Balbharati, SB Road, Pune

OFFICE BUILDING

CIVIL WORK :

Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains of all types along with accessories etc. complete as per specification No: WG-DM/PW

Dismantling the existing Telephone / LAN / WAN / TV cables and wires of all sizes along with casing-capping / conduit complete as per specification No: WG-DM/PW

Dismantling the existing aluminium/copper mains, sub-mains wiring upto 10 sq.mm. along with accessories etc. complete as per specification No: WG-DM/PW

Removing Existing tiles (with skirting/Dado/flooring),or marble or polished shahabad floor or dado with out be concrete including stacking the materials as directed with all leads, lifts etc. complete

Removing of plumbing pipe/sewage pipe/disconnection of the water line at one location including required labour ,tools & tackles,minor fittings etc complete as directed by Enginer-in-charge.stacking of all materials at designated place is part of scope of work.

Removing cast iron or wrought iron or A.C. pipe and stacking them as directed with all leads, lifts etc. complete.

Dismantling and removing of existing toilet water proofing and the underlying brick bat coba of any thickness upto the top of the RCC slab / chajja. shifting debris down stair, cleaning the area to receive new waterproofing treatment, removing and carting away debris anywhere outside premises as directed complete.

Making through holes in plain or reinforced cement concrete with Diamond core drilling system by using Bosch power tools.of following diameters. Rate in Dia/mm

Providing and laying Vitrified Matt Finish at cabin & at other areas having decorative, Desired pattern type of size 600 millimeter x 600 millimeter of 10 millimeter thickness including surface preparation with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints if required spacers and epoxy Grouting curing and cleaning etc (Basic Rate 95 Rs/sqft) .

P&L Vitrified Skirting on wall, details same as above.

Providing & fixing Granite Door Frames with Polished natural granite teliphone black stone for doors with all necessary hardware, fixing in position complete. (basic Rate 220 Rs/sqft)

Providing & fixing 20 mm thick Polished natural Granite telephone black stone in required sizes over the entire length and width of window opening in bed Cement Mortar 1:6 in line and levels or as directed by Engineer Incharge including cleaning, curing, staging, shifting, filling the joints with white or grey cement, as per standard specifications or as instructed by Engineer Incharge (not more than 300 mm).

Solid Core Flush door Single leaf with/without provision for vision panel, Providing and fixing factory made solidcore flush door in single leaf 35mmthick, decorative types,of exterior grade,as per detailed drawings, conforming to I.S.:2202-1962 (Revised)with approved face veneers on both faces with/with out glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, hold fasts, mat finish stainless steel fixtures, Accesories, hardware, fastenings, finishing with french-polish/waxing complete.(with out door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter.(Ozone, Dorma, Geze )

Solid Core Flush door double leaf with/without provision for vision panel Providing and fixing factory made solidcore flush door in double leaf 35mmthick, decorative types,of exterior grade,as per detailed drawings, conforming to I.S.:2202-1966 (Revised)with approved face veneers on both faces with/with out glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, hold fasts, mat finish stainless steel fixtures, Accesories, hardware, fastenings, finishing with french-polish/waxing complete.(with out door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter. (Ozone, Dorma, Geze )

Providing and fixing Factory made 31mm ABS Plastic Door made of abs plastic moulded sheet of1.5mm thickness P.U. foam insulated of density 40kg per cubic meter with seasoned wood to fit lock and hardware covered with aluminium ‘A’ section of 31mmx 27mmx 27mmx 1.5mm thick powder coated and fitted with PVC‘ L’ Corner of dimension 75mmx75mmx10mm thick on all four sides including all labour, material, stainless steel fixtures and fastening etc complete

Providing and fixing in position Powder coated Aluminium four track Sliding Windows of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass, Mosquito net, of approved quality etc. complete.MAKE: JINDAL.

Solid Core Flush door Single leaf with/without provision for vision panel, Refurbishing of existing solidcore flush door in single leaf with approved face Laminate on both faces with/with out vision panel and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, hold fasts, mat finish stainless steel fixtures, Accesories, hardware, fastenings, finishing with french-polish/waxing complete.(with out door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter.(Ozone, Dorma, Geze )

Providing and fixing in position anodised (asperIS1868/1982) Aluminium fixed staggered (ZType) Ventilator with aluminium rectangular pipe 63mmx38.10mmx1.22mm at weight 0.650 Kilogram/ Running metre, Aluminium angle of size15mmx15mmx1mm, aluminium channel of 9mm sizes, S.S. mosquito net of 304 Grade, 4mm thick float glass per detailed drawing and as directed by Engineer in charge etc.complete.

Providing and fixing ½” thk. Gypsum Board False Ceiling: Providing and Fixing Main Frame Suspended ceiling consisting of fixing company made GI channels of 27mm X 0.5 mm thick having one flange of 20mm and another flange of 30mm along with perimeter of the ceiling. Frame should be properly anchored to the MS frame . The suspending GI intermediate channels of size 45mm x 0.55 mm thick with two flanges of each from the soffit @1200 mm centers with GI hangers of 25mm x 0.5mm thick fixed to soffit with GI cleat and steel expansion Anchor fasteners and to intermediate channel with GI nut and bolt. Ceiling section of 0.5mm thickness having knurled wedge of 51.5 mm and flanges of 26mm each with clips of 10.5mm fixed to the int. channels with help of connecting clips in perpendicular direction to the intermediate channels at 450mm center, 12.5mm thick tapered Edge Gypsum plaster board is to be fixed with 25mm screws maintaining proper distance . Surface to be finished with tape and plaster. Cost to include the cutout provision for AC Grill, Light Fittings and any other gazetts as per requirment.cost including two coats of putty and painintg as per Instructions of Architects

Providing and fixing Modular false ceiling of 600x600mm center to center and 13mm thick square mineral fiber board Dune to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T2”x1½” (50mmx40mm) weighing 0.39Kilogram /mat 60cms center center and fixed with ½”x½”(15x15mm) flanges weighing 0.19 Kilogram /m suspended on 6mm dia mild steel rod weighing 0.22 Kilogram /m, fixed on wall and beams including rounding of the edges with alluinium Tof2”x1½”(50mmx40mm) weighing0.39 Kilogram/m etc.(all alluminium sections shall be anodized) including all labour, material, lifts etc. complete.

Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed. As per Direction o

f Architect.

Gypsum POP Punning Vans on wall in finish complete 6 mm to 12 mm

Providing 3 coats of Plastic paint of approved shade to ceiling with necessary surface preparation ,primer etc complete.(ICI MAKE)

WALLPAPER: wall paper of approved shade with recommended adhesive of approved make which have 100% washable, scratch resistance, peel proof, and fire retardant properties.

TOILET WORK:

Providing Water Proof Bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc.complete.Watrprooging Compound :- Dr Fixit, Fosroc, Sika, Pidilite .

Providing and laying Vitrified Matt Fininsh Tiles (AT COMMON TOILET) having size 590mm to 605mm x to 605mm of 8 to 10mm thickness and confirming IS.15622-2006 (GroupBla)of approved make, shade and pattern for flooring in required position laid on a bed of1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.. Makes :- Nitco/ Kajaria (Basic Rate 95 Rs/sqft) .

Providing and laying Vitrified Mirror/ Glossy Finish Tiles (AT COMMON TOILET) having size 590mm to 605mm x590mm to 605mm of 8 to 10 mm thickness and confirming to IS.15622-2006(groupBla)of approved make, shade and pattern for dado in required position fixed in1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.Makes :- Nitco/ Kajaria (Basic Rate 95 Rs/sqft) .

Providing and laying Vitrified Matt Fininsh Tiles (AT ATTACHED TOILET) having size 590mm to 605mm x to 605mm of 8 to 10mm thickness and confirming IS.15622-2006 (GroupBla)of approved make, shade and pattern for flooring in required position laid on a bed of1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.. Makes :- Nitco/ Kajaria (Basic Rate 95 Rs/sqft) .

Providing, laying and jointing UPVC (Unplasticized Poly Venial Chloride) pipes 15mm to 50mm including fittings and flanges suitable for 5 kg/cm2 pressure ( Finolex / Astral make) Water Supply Pipes including fixing in walls, chasing & making holes in walls ,making them good after the work, pressure testing the entire line before concealing and testing the line and joints after completion etc. completed in all respect. ( Pipe as per ASTM-D 2466 and Fittings as ASTM-D 1785) As per toilet layout given in drawing (Per Toilet qty)

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing, laying and fixing P.V.C. pipe of 100mm/ 75mm dia (for Drain).with fittings such as bends, tees, reducers, clamps, etc.including necessary excavation, trench filling etc. complete.Including removing existing pipeline if necessary and convey ing and stacking the same in site or as directed etc. complete.

Plain Fiber Cement Board Sheet, Thickn

Supply & Installation of GLAZED DOUBLE Leaf Door with frame formed out of section 50mm x 25mm using as door Jamb with Patch, pivot, Hinges at top & bottom and Single Leaf Glazed shutter of 10/12mm toughened glass & Approved Door Hardwares like Exposed door closer with Sadle plate, Mortize Lock with lever handle and 60mm door stopper etc complete with required accessories (Make JEB Slimline / Ikon VICO / kubk Hardwear :-OZONE / GEZE / HAFFELE) . ( for opening - size 6'0" W x 7'0" H )

Providing and applying Melamine polish of (Asian/ solvosol/ mrf) required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete.Note:The work to be executed on prior approval of Superintending Engineer will be necessary.

Providing and fixing Pelmet (flat along ceiling) in 19mm co

Linear Workstations 900mm X 600mm (W1F) - Supply and installation of Linear Workstations 900mm X 600mm in League Plus desk base system (BIFMA CERTIFIED) System - League Plus desk based Work top considered in 25mm thick Matt/suede finish Prelam particle board finish with 2 / .8mm straight PVC edge lipping and Worktop height 745mm from ground level.Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), 1.2mm Thick League plus 50x50 open legs to support the worktop.Privacy Panel thickness 18mm extra, Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), HNI Access flap (450) above the worktop for electrical, Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), verticle duct for wire travel from ground. Front Modesty Panel - Matt/suede finish 18mm Thk. PB Prelam modesty panel of 415mm H with 2 / .8mm straight PVC edge lipping (As per drawing)

Plastic Floor CPU Trolley (Black) on castor(As per drawing)

2D+1FD Matt/suede finish OSL Prelam Particle board pedestal with 2 / .8mm straight PVC edge lipping , on castor, 'C' Handle, 18 thick back (Size: 400W X 450D X 621H)(As per drawing) Warranty: 10 YEARS

Low - Full height Prelam Storage / Over Head Storage - Supply and installation of OSL prelam Particle board storages (OSL Openable doors)(Note: Overhead storage required wall support to fix)(As per drawing) System - Prelam storage Prelam Storage - Matt/suede finish OSL Prelam particle board storage of size 600/750/900mm W X 450mm D x 750/1200/2100mm H with 2mm/0.8mm PVC straight PVC Lipping, 'C' Handle, 18mm Thick back panel, skirting (Matt/suede finish OSL Prelam openables 2 doors /4 doors / 4 doors with 2 dummy doors with 2mm/0.8mm PVC straight PVC Lipping)(As per drawing)

Size : 600mm W X 450mm D X 1200mm H

Size : 750mm W X 450mm D X 1200mm H

Size : 900mm W X 450mm D X 1200mm H

Size : 600mm W X 450mm D X 2100mm H

Size : 750mm W X 450mm D X 2100mm H

Size : 900mm W X 450mm D X 2100mm H

Size : 600mm W X 450mm D X 2100mm H (4 door + 2 Dummy Door)

Size : 750mm W X 450mm D X 2100mm H (4 door + 2 Dummy Door)

Size : 900mm W X 450mm D X 2100mm H (4 door + 2 Dummy Door)

Size : 600mm W X 450mm D X 750mm H (over head Storage)

Size : 750mm W X 450mm D X 750mm H (over head Storage)

Size : 900mm W X 450mm D X 750mm H (over head Storage)

Size : 900mm W X 450mm D X 2100mm H (4 door + 2 Dummy Door)

Warranty: 10 YEARS

Back Storage - Supply and installation of Stellar Back storage System - Stellar Back storage. Back unit - Matt/suede finish PB Prelam Back unit size 1800W X 450D X 750H with 30mm Thik Top, 'C' Handle, skirting, with 2mm/0.8mm straight PVC edge lipping (As per drawing) Size : 1800mm W X 450mm D X 750mm H ( Warranty: 10 YEARS )

Size : 900mm W X 450mm D X 750mm H (over head Storage)

Size : 900mm W X 450mm D X 2100mm H (4 door + 2 Dummy Door)

Free standing table (W04) - Supply and installation of Free standing table of size 1500mm X 900mm in Alfa freestanding Table System - Alfa free standing table. Worktop - Matt/suede finish 25 mm Thk. straight Prelam particle board with 2 / .8mm straight PVC edge lipping and Worktop height 727mm from ground level C shape Alfa Leg - 0.7mm Thick CRCA Metal Epoxy polyester powdercoated (40-80 microns, Matt finish with Nano Technology Pre-treatment process ), C shape Alfa as vertical support Electrical - Metal Epoxy polyester powdercoated (40-80 microns, Matt finish with Nano Technology Pre-treatment process ), Two layer cable beam below worktop Modesty Panel - Matt/suede finish 18mm Thk. Straight Prelam particle board modesty panel 525mm H with 2 / .8mm straight PVC edge lipping(As per drawing)

Matt/suede finish 2D+1FD + 2 Openable door-OSL PB Prelam combo storage on levellar, D Handle with 2 / .8mm straight PVC edge lipping (Size: 1050W X 450D X 727H))(As per drawing)

Size : 900mm W X 450mm D X 2100mm H (4 door + 2 Dummy Door)

Cabin Table 1A (W5A) - Supply and installation of Cabin Table of size 2250mm X 750mm X 1200mm in Stellar Cabin Table System - Stellar Cabin Table. Worktop - 25mm Thk. Matt/suede finish MDF Postlam Top 2400x750mm with 2 / .8mm straight PVC edge lipping Gable end - 18mm Thik. Matt/suede finish PB Prelam Gable end with 2 / .8mm straight PVC edge lipping Modesty Panel - 18mm Thik. Matt/suede finish PB Prelam modesty panel with 2 / .8mm straight PVC edge lipping. Round Leg - Dia 70mm Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), 2mm thick Aluminum Extrusion (hardness – 70-80 BHN) round leg as vertical support Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process) HNI Access flap (450) above the top with verticle duct for wire travel from ground (As per drawing)

Size : 900mm W X 450mm D X 2100mm H (4 door + 2 Dummy Door)

Cabin Table 1B (W5B) - Supply and installation of Cabin Table of size 2100mm X 750mm X 1350mm in Stellar Cabin Table System - Stellar Cabin Table. Worktop - 25mm Thk. Matt/suede finish MDF Postlam Top 2100x750mm with 2 / .8mm straight PVC edge lipping Gable end - 18mm Thik. Matt/suede finish PB Prelam Gable end with 2 / .8mm straight PVC edge lipping Modesty Panel - 18mm Thik. Matt/suede finish PB Prelam modesty panel with 2 / .8mm straight PVC edge lipping. Round Leg - Dia 70mm Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), 2mm thick Aluminum Extrusion (hardness – 70-80 BHN) round leg as vertical support Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process) HNI Access flap (450) above the top with verticle duct for wire travel from ground (As per drawing)

Size : 900mm W X 450mm D X 2100mm H (4 door + 2 Dummy Door)

Cabin 2 (W07)- Supply and installation of Cabin Table of size 2100mm X 750mm in League Plus desk based (BIFMA CERTIFIED) System - League Plus desk based Work top considered in 25mm thick Matt/suede finish Prelam particle board finish with 2 / .8mm straight PVC edge lipping and Worktop height 745mm from ground level. Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), 1.2mm Thick League plus 50x50 open legs to support the worktop.Metal Epoxy polyest

er powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), Access flap (450) above the worktop for electrical, Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), verticle duct for wire travel from ground. Front Modesty Panel - Matt/suede finish 18mm Thk. PB Prelam modesty panel of 415mm H with 2 / .8mm straight PVC edge lipping (As per drawing)

2D+1FD Matt/suede finish OSL PB Prelam pedestal with 2 / .8mm straight PVC edge lipping on Castor, C Handle (Size: 400W X 450D X 621H) (As per drawing)

Conference Table (W07) - Supply and installation of Conference Table of size 6600mm X 3300mm X 900mm in KD Fitting table System - KD Fitting table. Worktop - Matt/suede finish 25 mm Thk. straight Prelam particle board with 2 / .8mm straight PVC edge lipping and Worktop height 727mm from ground level Gable end - Matt/suede finish 25mm Thk. straight Prelam particle board with 2 / .8mm straight PVC edge lipping gable end. Modesty Panel - Matt/suede finish 18mm Thk. Straight Prelam particle board modesty panel 600mm H with 2 / .8mm straight PVC edge lipping. Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), Access flap (600) above the worktop for electrical, Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), verticle duct for wire travel from ground. (As per drawing)

Meeting Table (W08) - Supply and installation of Meeting Table of size 3980mm X 2425mm X 900mm in KD Fitting table System - KD Fitting table. Worktop - Matt/suede finish 25 mm Thk. straight Prelam particle board with 2 / .8mm straight PVC edge lipping and Worktop height 727mm from ground level Gable end - Matt/suede finish 25mm Thk. straight Prelam particle board with 2 / .8mm straight PVC edge lipping gable end. Modesty Panel - Matt/suede finish 18mm Thk. Straight Prelam particle board modesty panel 600mm H with 2 / .8mm straight PVC edge lipping. Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), Access flap (600) above the worktop for electrical, Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), verticle duct for wire travel from ground.(As per drawing)

Meeting Table (W09) - Supply and installation of Meeting Table of size 2100mm X 900mm in League Plus desk based (BIFMA CERTIFIED) System - League Plus desk based Work top considered in 25mm thick Matt/suede finish Prelam particle board finish with 2 / .8mm straight PVC edge lipping and Worktop height 745mm from ground level. Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), 1.2mm Thick League plus 50x50 open legs to support the worktop. Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), Access flap (450) above the worktop for electrical, Metal Epoxy polyester powdercoated (40-80 microns, Finish with Nano Technology Pre-treatment process), verticle duct for wire travel from ground.(As per drawing)

CHAIRS & SOFA

High Back gas lift & tilting (In meeting room)

Removing Existing tiles (with skirting/Dado/flooring),or marble or polished shahabad floor or dado with out be concrete including stacking the materials as directed with all leads, lifts etc. complete

Meeting room /staff chairs/Cabin / cubical visitors chairs (Medium Back) gas lift & tilting Synchro Mechanism with Mesh Back and five prongs Nylon base as per model finalised by architect (3 years Warranty)

Sofa Set 3+1+1, (at waiting area) Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat

Tea Table (at waiting area) 900mm X 750mm X 450mm for m.s. ante chamber.Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc.

Side Table (at waiting area) 450 mm X 450 mm X 450mm for m.s. anti chamber, director cabin, Providing And Fixing Of Side Table 450mm X 450mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 MM Thick Mica Etc.

ADDITIONAL WORK IN PASSAGE :

Removing iron pipe raling having wooden R.C.C. or C.C. or iron post and stacking the materials as directed etc. complete.

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and fixing 50mm diameter and 1.5 mm thick vertical and top Stainless steel hand railing in S.S.304 Grade with Stainless steel square / circular pipe bracing of size 32 mm x32mm x1.5 mm in 3 rows including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. ( Over Top of Wall at Passage 300mm wide )

Providing and fixing Modular false ceiling of 600 x 600 mm center to center and 13 mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2”x1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.3

9 Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete.

ELECTRICAL WORK

Supply, Installation & Testing of of standard DBs with all accessories including MCBs etc.

DISTRIBUTION BOARDS

Standard Factory Built MCB Distribution Boards of Double Door complete with all end terminations with copper Lugs and provide Distribution schematic inside DB door ,and MCB of 10 / 15KA breaking capacity with C characteristics etc.

MAIN VTPN DB

6 way VTPN MCCB I/C DB Double door complete with lugs, MCB’s, ELCB’s, etc., as per following details :-(Light Control DB )

Incomer : 1. 100A TP+NL MCCB,16 KA: 1 No.

Outgoing :

1. 40A 3P MCB,10 KA: 3 No.

Supply, Installation & Testing of of standard DBs with all accessories including MCBs etc.

4. 63A 3P MCB,10 KA: 1 No.

LIGHTING /AC/ RAW Power DB

8 way TPN MCB DB Double door complete with lugs, MCB’s, ELCB’s, etc., as per following details :-(Light Control DB )

Incomer : 1. 100A TP+NL MCCB,16 KA: 1 No.

Incomer :

1. 63 A 4P MCB,7.5/10 KA: 1 No.

Supply, Installation & Testing of of standard DBs with all accessories including MCBs etc.

4. 63A 3P MCB,10 KA: 1 No.

1. 63A, 30mA, 4P, RCCB:- 1 Nos .

6/10/16/20A SP MCB ‘ C’ Characteristic , 10 KA : 10Nos.

UPS DB (UPS +EMERGENCY CIRCUIT )

12 way sPN MCB DB Double door complete with lugs, MCB’s, ELCB’s, etc., as per following details :-

1. 40A 4P MCB,10 KA: 1 No.

1.40A, 30mA, 4P, RCCB:- 1 Nos .

40-63 Amp TPN MCB with metal enclosure For UPS incmng

Cable

Supply, Installation & Testing of following Cables. Cable shall be laid properly in the cable tray using cable tie. Proper & Permanent numbering shall be done on each end and for every cable.

3.5C X 50 SQ. MM. AL XLPE Armoured

3.5C X 35 SQ. MM. AL XLPE Armoured

4C x 16 sq.mm. Cu. Amr. Cable

4C x 10 sq.mm. YWY CU Flexible

4C x 10 sq.mm. Cu. Amr. Cable

3C x 4 sq.mm. YWY CU Cable

12 way sPN MCB DB Double door complete with lugs, MCB’s, ELCB’s, etc., as per following details :-

1. 40A 4P MCB,10 KA: 1 No.

4C x 6 sq.mm. Cu.Amr. Cable

40-63 Amp TPN MCB with metal enclosure For UPS incmng

4C x 4 sq.mm. Cu.Amr. Cable

Supply, Installation & Testing of following Cables. Cable shall be laid properly in the cable tray using cable tie. Proper & Permanent numbering shall be done on each end and for every cable.

1C x 6 sq.mm. Cu YY FLEX Cable

4C X 10 SQ.MM CU. Flexible CABLE for UPS Input Out

4C x 10 sq.mm. YWY CU Flexible

Cable Termination

End Termination of following cables using proper size and type of Lugs. Proper and permanent tagging/numbering shall be done. Proper size cable glands shall be used for each cable entry.

4C x 16 sq.mm. Cu. Amr. Cable

4C x 10 sq.mm. Cu. Amr. Cable (BUS BAR (1.a)TO AC (1.e)

4C x 6 sq.mm. Cu.Amr. Cable (BUS BAR TO DB (1.b) & (Main UPS DB (1.d) TO UPS DB (1.c))

4C x 4 sq.mm. Cu.Amr. Cable (AC)

WIRING Point Wiring

Supply & Installation of point wiring using 600v grade 1.5 sqmm copper conductor PVC insulated wires PVC conduits laid concealed over false ceiling or in wall chases including 1.5 sqmm circuit wires from the relevant DB and also including 1.5 sqmm green colour copper earth wire and provision of grid plate type switches & sockets as approved by the consultant .Each circuit feeding not more than 8 points OR 800 watts as per following configuration

Primary light points including the cost of 5A switch(Avg circuit length 6mtr)

Secondary light points looped from the above point (Avg circuit length 3mtr)

5/15A Ups / Raw Power Plug point. (Rate are without wire) Fridge/Water dispencer / Ovan / Printer / Ploter / Fire panel / wall fan / Exaust / pantry / water purifier / etc..

S & I of point wiring for UPS Point / Raw Power Points for computers using 3 X 2.5 Sqmm copper wires pulled through already laid raceways and taken upto table top using PVC rigid or flexible conduits run within wooden/metal partitions Each point consisting of 2 nos of 5A , 2/3 pin sockets & 1 No., 15A Switch , wired together forming one point

6 Amp 5 Pin Socket with 6 Amp Switch for Raw power.(Avg circuit length 5 mtr)

6/16 Amp Combined Socket with 16 Amp Switch (Cleaner Sockets, etc.)

20 Amp Industrial type Metra Plug & Socket Outlet complete with 20 A SP MCB.

32 Amp Industrial type Metra Plug & Socket Outlet complete with 32 A TP MCB.

RACEWAYS & WIRING

Supply and laying Raceways / Conduits ( for under floor trenches / On trays) on existing flooring. Raceways / conduits shall be fixed to the flooring with GI clamps for finished levels as per the site conditions or through partitions with all accessories.

100mm x 40mm Aluminium raceways,

25mm MMS PVC conduits of wall

100 x 50 mm PVC Trunking

50 x 50 mm PVC Trunking

S & I of floor junction boxes with top cover for above raceways of following sizes fabricated out of M.S. sheets fully powder coated with removable screwed cover plates on all four sides for blocking the entry. One side cover plate having 4 nos. 1' dia knockouts for flexible conduit outlets as per the requirements .

COVER PLATE FOR JUNCTION BOX ( MS Powder coated 300 X 300)

Wiring for lighting circuit From LDB/RPDB to Switch using 2.5 SQMM MULTI-STAND COPPER CONDUCTOR WIRES (ONE FOR PHASE RED ONE FOR NEUTRAL (BLACK COLOUR) AND ONE FOR EARTH (GREEN COLOUR) (1.5 SQMM) WIRING SHALL BE DRAWN IN SUITABLE DIA INDEPENDENT CONDUIT (DB to SB & DB to PP)

2 x 1.5sqmm + 1 x 1.0sqmm E.Wire (Emergency & Extra Pri,Sco.)

S & I of point wiring for UPS or stabilized with 2 x 2.5 & 1 x 1.5 sqmm cu conductor power points on workstations / table for yellow phase, blue neutral , green earthing through floor raceways and taken upto table top using PVC rigid or flexible conduits run within wooden/metal partitions . ( MAX FOUR/SIX tables served by one circuit from CPDB ) ( MAX 10/12 tables served by one circuit from LRDB ) without counduit

3 C x 2.5 sqmm sqmm for A/C supply from AC DB to AC unit with conduit

EARTHING ONLY WIRING

8 SWG copper bare wire

25mm x 3mm thick GI strip

6 sqmm,cu. flex. Wire, in 20mm PVC flexible conduit

PROJECTOR WIRING & CABELING

Supply & laying of VGA cable from projector to the work station

HDMI Cable

LIGHTING FIXTURES & FANS

Supply & Installation of 36 W LED (Philips cat. No. DN296B LED 20S PSU WH, CW -IMRC11-36CW or EQV 5 year warranty)

Supply & Installation of LED DOWNLIGHTER 15W - 18 W ( Philips cat. No. DN296B LED 20S PSU WH, CW - IRDLR01RD-15CW OR Eqv) 5 year warranty

Supply & Installation of LED Suspended Light 28 W single light (IMSL08-28WHSA, DESTELLO50LR25WLED857SPMMAWH, Axeon 4 Feet In Length)

Supply & Installation of 1 X 20 Watt T5 tube Light (Philips cat. No. RC810X LED20S 6500 PSU W15L 120 ODWH)

Ceiling mounted double bearing fan of 1200 mm sweep with 3/4 star energy saving rated BEE.

9" Exhaust fan with louvers arrangement for air flow

Dismatling & Fixing Split A.C with outdoor with cooper tubing (upto 6 mtr) ,including bore holes ,L bracket, with all necessary fixtures and fittings ,etc complete.

Passive Componenets

2-1427215-4 - Copper Cable, Category 6, unshielded, LSZH, 1000 ft, gray

1859053-1 - Faceplate Kit, 4 port, 110Connect, British Standard style, white

Supply & Installation of 1 X 20 Watt T5 tube Light (Philips cat. No. RC810X LED20S 6500 PSU W15L 120 ODWH)

1859050-1 - Faceplate Kit, 2 port, 110Connect, British Standard style, white

Passive Componenets

1375055-8 - SL110 Series Modular Jack, RJ45, category 6, T568A/T568B, yellow

1859281-2 - RJ45 Patch Cord, category 6, unshielded, yellow, 2 m

1933307-1 - Multimedia SL Series Patch Panel, straight, unloaded, 24-port

Rack Side 28-port Switch

Voice Connectivity

1375055-6 - SL110 Series Modular Jack, RJ45, category 6, blue

1375014-2 - RJ45 Patch Panel, SL Series, Modular Standard, category 6,loaded, 24-port

SPL - 100 Pair MDF Box with Krone

SPL - Jumper Wire-90 Mtrs

SPL - Pair Riser Cable-PVC

Misc. Components

SPL - 25MM Casing/Flexible/Conduit

SPL - Surface Mount Box

Other

Service - Testing and Labeling

FIRE PROTECTION SYSTEM (SPRINKLERS)

Sprinkler System

Above ground piping - GI, IS1239, Part 1, C Class, Fittings as per IS 1239, Part 2, Painting Fire Red.MAKE:Jindal

Other

SPL - Surface Mount Box

Other

Sprinkler System

Ball Valve, Screwed, WCB Body SS Ball,MAKE:Unison/ Zoloto

Pipe Supports as required fabricated with painting

complete

Hanger Supports.MAKE:Hi-Tech

Valve,MAKE:Zoloto

Butter fly valve 80 NB

Butter fly valve 50 NB

Butter fly valve 40 NB

Air relif valve 25 NB

Sprinklers - MAKE:Victaulic / Viking / Tyco

K80 / 68 Degree - Standard Response, Upright

Sprinkler Pendant type

Flow Switch 25mm

FIRE ALARM SYSTEM (FAS)

Addressable fire alarm Panel ( Make - AVANI)

Supply ,Installation and Commissioning ,Installation and Commissioning of Addressable fire alarm Panel which consists of display board which will have 160 Character Display with Touch key pad, Mother board which will have ARM CORTEX M3 32 Bit Processor, Inbuilt RS-485 Networking Circuit for peer to peer networking, Inbuilt USB 2.0 Port for upload and download the Configuration tools, Two inbuilt programmable inputs, Two inbuilt NAC's, and Three Programmable Relays, and 4 Loop Card circuits. power Supply ,Installation and Commissioning Board which will have SMPS fully protected board, which its operates on 120 to 220V AC ± 10% with 50/60 Hz, battery backup 24V DC with built-in charger. the panel have IP-50 rating Optional: for BMS integration thru MODBUS converter, Graphical Software, Software for TCP/IP Module, provision for GSM based Auto dialler,provision for printer thru compatible module, Approval UL Listed, Make: Ravel,Avani - LCS

Supply ,Installation and Commissioning ,Installation and Commissioning of Loop Card which will have 254 devices of both detectors and modules in a single line circuit on any combination, SLC should supports both Class A and Class B wiring.Shall have an LED indication for FIRE,Normal and Redundancy conditions Approval: UL Listed, Make: Ravel