REPAIR TO BOUNDARY WALL FENCING GATES AND OTHER MISCELLANIOUS WORKS AT INS HANSA RAQAS NASDO NTS GOA UNDER AGE BR I OF GE NW VASCO

Amount

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/disintegrated rock complete all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for PCC M-30 Design mix Type B1 1:2:4, using 20 mm graded stone aggregate) in hard standing complete all as specified and as directed.

Forming 12 mm thick expansion joints 100 mm thick filled with performed bituminous filler and top 30 mm primed and sealed with sealing compound grade “A” complete all as specified and as directed.

Forming for contraction (Dummy) joints 65 mm deep and 10mm wide filled with sealing compound grade “A” complete all as specified and as directed.

Removing excavated/demolished material exc. 1.50 km but n exc. 5 km and depositing where complete all as specified and as directed.

M&L for providing, cement concrete type B1, 1:2:4 using 20 mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

M&L for RCC M-30 design Mix Type B1 1:2:4, 20mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L RCC M-30 design Mix Type B1 1:2:4, 20mm graded aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L Mild steel bars 10 mm dia and over, cut to length, bent to shape required including cracking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to TMT Bars complete all as specified and as directed.

M&L Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cracking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to TMT Bars complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

Dismantling of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors or aprons complete all as specified and as directed.

M&L Granite 18-20 mm thick (of any type) work (table rubbed and polished) in horizontal steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M & L 18-20mm thick Granite (of any type) work (table rubbed and polished) in vertical for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Soft/ disintegrated soil and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and as directed.

Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for preparation of new steel surface and applying one coat of red oxide zinc chrome primer and two coats of Epoxy anticorrosive paint over 10 cm width or girth complete all as specified and as directed.

M&L for preparation of old steel surface and applying one coat of Epoxy anticorrosive paint over 10 cm width or girth complete all as specified and as directed.

Supply & Fixing PVC coating GI chain link fencing mesh size 50mm x 50mm including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

S & F Mild steel screw bolts 50 mm long 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed.

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing's and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed each line wire to be measured complete all as specified and as directed.

Material & labour for razor tape concertina coil 610mm dia, 9 SWG hot galvanised springs,125 to 127 clips per coil, 50 circle of wire in each coil ( coil coverage of 6 to 8 RM and weight (not less than) 8.5 Kg per coil), Zinc coating 250 to 300 gms/Sqm, GI wire, GI clips, GI pins and fixed on top of compound wall with angle iron bracket complete all as specified and as directed.

Demolition of stone /boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L Pre - cast cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) block masonry with solid blocks built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M & L for PCC 1:2:4 type B1 (using 20mm aggregate ) as in coping, edging etc complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:4 finished even and smooth with out using extra cement as on walls complete all as specified and as directed.

M & L for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as specified and as directed.

M & L for preparation by complete removal of existing treatment of painted walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10sqm complete all as specified and as directed.

S & F Rolled sections as in framing for cladding, glazing and like fixed with angle cleats,screws,bolts etc including embedding in concrete and necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F in repairs for 15 cm wide Everest decorative Artewood Fibre Cement plank of dark wooden shade as in wall cladding of thickness 8-12 mm complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 300 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & incl.10 mm thick backing coat in CM 1:4.complete all as specified and as directed.

S & F in repair aluminium composite panel of viva/alucobond (classic sparkle colours) 3 mm thick exterior grade PVDF with foil thick of 0.25mmx frame work made out from aluminium section of size 38x25mm supported on masonry/RCC with the help of MS Bracket fixed with brick fastener /anchor fastener and groove fied with 789 weather silent of DOW corning etc incl scaffolding of ht 8-10 mtr and fixing as per manufacturer instructions complete all as specified and as directed.. complete as per architect drg and as per instruction of Engineer-in-Charge

SACHIN CONSTRUCTIONS (BID ID -3376751)

M/S DUBAL CONSTRUCTION (BID ID -3375069)

K M SUBHANAIAH (BID ID -3373915)

M/S P S BABU (BID ID -3373318)

M/s VEEJEE ENTERPRISES (BID ID -3376604)

M/S jvsr constructions (BID ID -3374281)

M/s J.D. DESAI (BID ID -3376836)