Providing Fire Hydrant system and sprinkle system at Govt. Circuit House, Nani Daman. (E-47023)

Amount

Civil work

SUB ESTIMATE - I Balance work for Fire safety Fire Hydrant system. Supplying, Installation, Testing & Commissioning of MAIN ELECTRICAL MOTOR DRIVEN PUMP SET of discharge capacity 137 M3/HR, 70 Mtrs. Head, Kirloskar or Lubi make Electrical Motor Driven Fire Water pump devloping pressure 7 kg/cm2, 55 KW, 2900 RPM TEFC MOTOR +STD ACCESSORIES i.e. BASE PLATE COUPLING, COUPLING GUARD & FOUNDATION BOLTS. PUMP HAVING AN AUTO CHANGE OVER FACILITY IN CONTROL PANEL including foundation etc. complete as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of JOCKEY PUMP SET of 10.8 M3/hr Capacity, 70 Mtrs Head Kirloskar or Lubi Make. Centrifugal type with horizontal end suction to delivery high efficiency volute type capacity Coupled to 15 H.P., 2900 RPM motor complete with base plate coupling guard foundation bolts, foundation etc. complete as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of Stand by Diesel Engine driven Main fire pump of cap. 137 M3/hr, 70 mtr. Head (All base frame with expoxy paint) developing 7 kg/cm2 pressure, KOEL make, Air/ Water Cooled type Diesel Engine developing 68 BHP at 1800 RPM with std. accessories i.e. Base plate & coupling, pump should be with an Auto changeover facility in control panel including foundation and bolts etc. complete as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of Main control panel suitable for main hydrant pumps (2 nos.) & jockey pump & with Auto Start and stop change over switch for main pump push button for manual stop with all annunciation as per TAC. The control circuit for the jockey pump set shall be designed that whenever pressure reduces the pump shall start automatically and when pressure reaches rated system pressure than it should automatically switched off as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of PRESSURE SWITCH Info’s RT 100 pressure switch approved make and range 0-10 kg/cm2, connection size 25 (*) NB and SS 304 casing. Pressure switch output should be interface such that fire water main/diesel driven pump and jockey pump can start automatically set pressure make: indfoss/Equip as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of PRESSURE GAUGE. Burden type pressure gauge with gauge cock make wares / firebug 0-14 Rang SS hindoIa Gauge with siphon waree/Feibig/H .guru SS 4” Dial as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of CI DOUBLE FLANGED TYPE NON RETURN VALVE WATER CHECK PN 1.6 check valve for fire water system Moc: CI As per IS 5312 (part-1) :198 4 Make H sarkar /Kirloskar/Audco as directed by Engineer-in-charge. 150 mm Dia.

80 mm Dia.

Supplying, Installation, Testing & Commissioning of CI NON RISING SPINDLE TYPE SLUICE VALVE PN.1.6 Flange drilling as per IS : 1538 Table 4 & 6 of following sizes cast iron non raising spindle SLUICE VALVE generally confirming to IS: 14846 having body made of cast iron as per IS: 210 GR. FG. 260. as directed by Engineer-in-charge. 150 mm Dia.

Supplying, Installation, Testing & Commissioning of CI. HEAVY DUTY FOOT VALVE WITH STAINER, GUN METAL INTERNALS FOR PUMP SUCTION: MOC CI As per IS: 780/2906 MKHSK. for Fire water system, as directed by Engineer-in-charge. 150 mm Dia

100 mm Dia.

Supplying, Installation, Testing & Commissioning of BALL VALVE (19 mm Dia) ISI Mark as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of EARTHING flats using Spacers and GI Clamps complete for Mains. Jockey and Panel as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of armoured conductor 4 Core X 25 Sq.Mm –Cu armoured cable 24 mtrs. 4 Core X 4 Sq.mm-Cu 2 core cable 6 mtrs. X 1/5 sq.mm cu cable 12 mtrs for 2 Nos. of main motor pump and Jockey pump as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of Air vessel 300 mm Dia X 1500 mm long the complete package requirement of air cushion Tank Manufactured from 300 mm Dia x 1.5 mtrs Ht. Cylindrical floor mounted air water cushion Tank having top and bottom Dish ends with 20 mm dia inlet Drain and air release Nozzle and Tripod leg floor stand for hydrant system delivery header main connection etc. complte as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of M.S. fabricated Priming Water Tank of 500 lts. capacity to provide priming water and connection to MS Priming tank complete with float valve & inlet MS Pipe of 50 mm dia Butterfly ball type valve of 50 mm Dia. With level indicator all accessories as required incl. inlet connection as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of EXTERNAL PIPING WORK ABOVE GROUND/ UG PIPING: Supply fabrication Erection & commission of GL ERW “C” class pipe confirming to IS 1239/3589 with necessary fitting like Tee Bend confirming to IS :1239 Flange conforming to class ASA 150 Commercial Nut bolt Gasket X-ray Quality welding testing including consumables for hydrant system The pipes should be laid above ground in one coat of ZINC primer & one coat of EXPOY COATING and Fire Red Colour as per IS Code 10% of the field joints shall be radio graphed, brushing one coat of primer & 2 coat of enamel paint of Asian /Eq make and Fire Red colour as per IS code following sizes as directed by the Engineer-in-charge. 150 NB

Supplying, Installation, Testing & Commissioning of ANTI CORROSE TREATMENT FOR UNDER GROUND LINES with one coats of primer and one coat of 4 mm thick readymade anticorrosive tap. Make: IWL.

Supplying, Installation, Testing & Commissioning of CI BUTTERFLY VALVE PN 1.6 CI Butterfly Valve audco or equivalent make PN 16: Flange drilling to class PN 1.6 rating with required matching flanges etc. comp. as directed by Engineer-in-charge. 150 mm NB

Supplying, Installation, Testing & Commissioning of MS HOSE BOX 18 GAUGE COATED MS Hose box fabricated from 20 SWG old rolled sheet with 3 mm glass front window painted with powder coated PO.RED OUTSIDE & WHITE INSIDE SIDES 30" X 24"X10" Double door/Single door as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of SMALL BORE 3/4" DIA HOSE REEL DRUM SET: 20 mm Dia X 30 M long Dunlop rubber hose pipe with nozzle shut-Off valve and drum Vilas/ STANDARD RUBBER hose reel mounting Spindle hinge: Hose dia 20 mm X 30 Mtr. Length as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of 4-Way SIMLESS CONNECTION FOR FIRE BRIDGE INLET: as directed by Engineer-in-charge. 100 dia TWO way Fire Bridge connections with 63 mm dia Instantaneous inlet complete with all necessary fittings.

2 core X 1.5 sq. mm. FRLS wire. Anchor/RR/Polycab.

Supply & Installation of fire Extinguisher Safex/ Kenex Make 4.5 Kgs. CO2 Fire extinguishers designed construction & testing as per IS:15683 with fire rating 21 B operating temperature -30 degree C to 55 degree supply with body bearing IS: 7285 mark and approved by CCoE tested at 250 Kgs/cm2 fitted with ISI marked & CCoE approved valve as per IS 3224 Co2 gas as per IS 15222 externally painted with P.O. red shade No. 538 of IS 5. Supply with standard accessories as directed by Engineer-in-charge.

Supplying, Installation, Testing & Commissioning of 6 kg. ABC . Stored pressure atasi type Fire Extinguishers designed construction & testing as per IS:15683 with fire rating 21 B Body hydro tested at 35 bae operation temperature -30 Deg. C to 55 Deg. C internal/ external Epoxy powder coating with P.O. Red shade No. 583 of IS 5m supplied with ISI marked Gas Cartridge as per IS 4974 & with standard accessories 9 WITH NEW SQUEEZE GRIP TYPE CAP VALVE REFILLING as directed by Engineer-in-charge.

Sub Estimate - II Servicing of Fire Extinguisher. HP test, Painting and Labelling for ABC Type 6 Kgs Capacity Fire Extinguishers Complete.

HP test, Painting and Labelling for CO2 Type 4.5 Kgs Capacity Fire Extinguishers Complete

Sub Estimate - III Refilling of Fire Extinguisher. Refills for ABC Type 6 Kgs Capacity Fire Extinguishers Complete. Refills consisting of 6 Kgs of (MAP 50%) ISI Marked ABC Dry Powder Confiriming to IS: 4308, Complete with Nitrogen Gas Pressure.

Refill for CO2 Type 4.5 Kgs Capacity Fire Extinguishers Complete Refills for CO2 Type 4.5 Kgs Capacity Fire Extinguishers Complete, filling of 99.9% Pure Fire Fighting Gas from Explosive Approved Filling Staion at Mumbai with test certificate & purity Certificate from Explosive Approved Filling Station.

Sub Estimate IV- Fire Extinguisher AMC one year. To carry out quarterly yearly ( Once in a four Months/ Quarterly) Servicing & inspection work of portable type upto 9 Ltr / Kgs Capacity Fire Extinguishers complete with Certification for the system in good working condidtion : 40 Nos

Sub Estimate - V Fire Alarm System Service Charges and AMC for one year. To carry out Quarterly servicing, repairing & Operation of Fire Alarm 4 Zone Panel Schedule : Quarterly 4 Services in each Services, hence in visit = 2x4= 8 in AMC the Year. (ut-most satisfaction of Engineer-in-charge.)

To carry out Quarterly servicing, repairing & Operation of Fire Alarm Manual Call Point Equipment Schedule : Quarterly 4 Services in each Services, hence in visit = 20x4= 80 in AMC the Year. (ut-most satisfaction of Engineer-in-charge.)

To carry out Quarterly servicing, repairing & Operation of Fire Alarm Hooter Equipment Schedule : Quarterly 4 Services in each Services, hence in visit = 21x4= 84 in AMC the Year. (ut-most satisfaction of Engineer-in-charge.)

To carry out Quarterly servicing, repairing & Operation of Fire Alarm Smoke Detector Control Modules Convectional Type Equipment Schedule : Quarterly 4 Services in each Services, hence in visit = 74x4= 296 Nos. in AMC the Year. (ut-most satisfaction of Engineer-in-charge.)

Sub Estimate - VI Automatic water sprinkler system. M.S. PIPE ERW CLASS- C HEAVY DUTY ABOVE GROUND, RISER, OVERHEAD Supply, Fabrication, erection & commisioning of MS ERW heavy class pipes confirming to IS 1239/3589. X-Ray quality welding for Testing for SPRINKLER SYSTEM. 10% of the field Joints shall be radiographed on chargeable bases. Make: TATA / JINDAL 100 mm NB

PAINTING ON ABOVE GROUND, RISER, OVER HEAD MS PIPE LINE Supply & application of single coat of Zinc oxide Primer & Two coat of fire red paint shade 536 as per IS: 5 Make: ASIAN/ BURGER

SPRINKLER QUARTERRISED BULB DETECTOR PENDENT TYPE 68 DEGREE Supplying, fabrication, instaalltion, testing and commisioning conventional sprinkler quartzoid bulb type, with melting temperature 105 degree with 15 mm screwed end connection of 68 degree rating, K 80 & orifice shallnot be less than 6 mm. sprinklers shall be UL Listed/ FM approved with chrome finished. Make: TYCO/ HD Water Sprinkler pendent type- 68 deg. For Detectin Line Pressurise.

Water Sprinkler side wal type- 68 Deg for detection line pressurise.

Plug for sprinkler 15 mm dia.

Providing wall fixing bracket support for above ground, riser,over head for all sixe of pipe Approximate quantity

MS STRUCTUAL SUPPORTS Supply of MS steel for support like angle, chennal, plate, nut bolts, packing, clamps, paint, fittings, etc for fabrication to support sprinkler riser line, header line and branch line. (Approximate)

HANGING SUPPORTS Supports for hanging of sprinkler from sealing with all respected fittings, check nut bolts, packing, rod, etc

Providing & fixing Inspector test drain valve with sight glass arrangement. Suitable for 80 mm dia or 50 mm dia of sprinkler line assembly of 25 mm dia with QBD type sprinkler, Drain valve, supports, elbow, tee, bend, u- clamp, nutbolts, painting

Y- TYPE STRAINERS CAST IRON BODY FLANGE END Providing & fixing CI double flanged "Y" type strainer with bronze mesh, including nuts, bolts & 3 mm thick gasket complete as required. As per: 210 Make: ZOLOTO/ KIRLOSKAR 100 mm NB

BUTTERFLY VALVE CAST IRON BODY WITH MATCHING FLANGES AS PER IS: 13095 PN: 1.6 Providing & fixing isolation valve (double flanged) with CI bodt & disc, stainless steel/ carbon steel shaft, hand lever operated, PN 1.6 rating, conforming to IS: 13095/ BS: 5155. Make: ZOLOTO/ AUDCO 100 mm

GATE VALVE CAST IRON BODY FLANGE END HEAVY DUTY Supplying of CIDF, OS & Y type Non rising spnidle gate/ sluice valves with matching flanges(2Nos) nut bolts, gasket with Matching drilling to 150 lbs with accessories as per specification PN1.6 rated as per IS: 14846 with ISI marked Make: ZOLOTO/ KIRLOSKAR 100 mm dia

ALARM VALVE VERIABLE TYPE- A CAST IRON BODY SIZE: 100 MM UL LISTED Flange End ANSI B16.1 With complete ACV constant pressure trim assembly for alarm valve- A size: 100mm Water motor Gong Bell- GA, Type- A, retard chamber, flow swtich, pressure Guage UL listed. complete with drain cock arrangement and all accessories, welded or screwed as required including cutting holestand chased in brickor RCC walls Make: TYCO/ HD

Providing flow switch pedal type Make: DENFOSS/ Honeywell 100 mm dia

Air release valve ball type stainless steel body of 25 mm dia. Make: SHAH/ NEWAGE

Providing flexible sprinkler hose pipe 500 mm to 2000 mm long sizewith 25 mm inlet & 15 outlet threaded connection for sprinklers stainless steel body single piece braided type Make: SAFEX/ HD 0.5 mtr to 2.0 mtrof length 25 mmx 15 mm end connection

Supply instalation testing & commissioning of Rosset plat disc for conciled sprinklers complete powder coated size 90 mm dia with hole 25 mm dia Make: SAFEX/ HD

BALL VALVE WITH HANDLE BRASS BODY BSP THREADED Ball valve with handle GM body Make: ZOLOTO/ AUDCO 25 mm dia

20 mm dia / 15 mm dia

PRESSURE GUAGE Providing & fixing pressure guage (0-10 Kg/ Cm2) with necessary flanges & fitting such as tees, elbows & painting and supports etc. Complete Make: BAUMER/ MICRA 100 mm dia