8284/E8

Amount

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 Cm thickness. (below or above ground level) complete all as specified and directed.

Demolition of brick work , built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Dismantling timber fillets, rails, posts, rafters, purlins etc. under 40 sqcm in section in unframed work. Complete all as specified and directed.

Dismantling floor, hearth or wall glazed tiling including cement mortar bedding (but not backing), removing the debries all as specified and directed.

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exe 1.5 Sqm but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description n.exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

Dismantling asbestos cement(corrugated, semi-corrugated,etc.) sheets in roof coverings complete all as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges complete as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Material and Labour for Plain cement concrete 1:2:4, type B-0, (using 12.5 mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.

"Supply only" liquid integral water proofing compound (ISI marked) complete all as specified and directed. Make:- STP NO 1/ PEDILITE(DR FIXIT)/ FOSROC/ CICO/ SIKA

Material and Labour Brick work with fly ash bricks of designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

Material and Labour Half brick thick Brick work with fly ash bricks of designation 7.5, straight or curved on plan of any radius, built in cement mortar 1:4 complete all as specified and directed

Supply and fix 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

Supply and fix 30mm thick Flush shutter,solid core construction,with particle board core and plywood face panels with commercial type on both faces complete all as specified and directed.complete all as specified and as directed.

Supply and fix in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix 200mm Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150mm Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and Fix 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

Supply and fix 100mm butt hinges mild steel, medium weight, cold rolled complete all as specified and as directed.

Supply and fix 100mm butt hinges stainless steel complete all as specified and as directed.

Supply and fix 150mm extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

Material and Labour Solid PVC door frame of size 50mm x 47mm made out of 5mm dual coloured PVC sheet used instead of plain colour PVC sheet and edge will be painted to match with printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing as per directed by Engr-in-Charge.

Supply and fix Factory made Solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain coloured PVC sheets for top rail, lock rail and bottom rail on either side and as gap inserted for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable sheet bedded and jointed together with solvent cement all as specified and as directed.

Supply and fix Factory made solid partly glazed i.e upper panel will be glass pane/wire mesh fitted externally in the clear space & lower panel will be plain colour PVC sheet shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, Panelling of plain colour PVC sheet to be fited in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

S&F in repair Steel rolling shutter with thickness of latch 1.25mm without ball bearing as specified including top cover anchoring rod, hasp & staple and one shop coat of primer , erected in position as including completee push pull of manual type as per directed . complete all as specified and as directed.

S & F in repair safety lever locks mild steel with 4 levers for rolling shutters as per directed

S & F in repair ball bearing for rolling shutters as per directed

Supply and fix MS locking plate of standard size and shape from approved quality with a coat of red oxide primer including taking down old one complete all as specified and directed by Engr-in-Charge.

Supply and fix Rolling shutter profile of 1.00mm thick MS sheet with a coat of red oxide primer (shop coat) minimum width of profile 75mm including taking down old one. complete all as specified and directed by Engr-in-Charge.

Supply and fix Spring of rolling shutter of approved quality and size all as directed including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge.

Materials and labour for Oiling and greasing of rolling shutter of any size and pattern including scrubbing down old greasing complete all as directed irrespective of width area exc. 7 sqm and n.exc. 18 Sqm each complete all as specified and directed by Engr-in-Charge.

Supply and fix Powder coated aluminium anodised three track sliding window frame with shutters ( two panels of glazed shutter and one panel of wire mesh shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements etc. complete and glazing with 5 mm thick tinted glass to aluminium frame work using rubber gasket . The section of frame and shutter is as under complete all as specified and as directed including tking down old unserviceable aluminium door:- (A) Sections for frame (i) Top and verticals 92x 29.50 x 1.30 mm thick (ii) Bottom 92 x 29.50 x 1.20 mm thick. (B) Sections for shutter (i) 'A' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick (iii) 'H' section 41 x 20 x 1.10 mm thick . Note:- Cost of glazing shall be measured and paid separately under relevant item of these schedule.

Supply and Fix Aluminium window with powder coated anodized aluminium frame of section size 65.5 x 38.10 x 1.5mm and Shutter with section 47.62mm x 44.5 mm x 1.5mm thick including powder coated aluminium anodised "D" handle, hinges, peg stays, tower bolt etc including jointing cleats for fixing Builder hardware fittings, including necessary fittings fixture/ aluminium snap beads etc complete all as specified & directed. Note: Cost of glazing shall be measured and paid separately under relevant item of these schedule.

Supply and Fix aluminium door with powder coated anodised aluminium frame of section size 101.60mm x 44.75mm x 2.4mm (jindal section 14021) thick, with shutter of style member size of 85mm x 44.45mm x 2.0mm thick (jindal section 19560) top/ bottom rail of member size 114.30mm x 44.45 x 2.15mm (jindal section 19574) and lock rail of member size 100mm x 44.45mm x 2.00mm thick (jindal section 19564) with rubber gasket and aluminium glazing clip beading and 100mm mortice locking arrangement, handle, tower bolt 200 mm long per shutter, rollers, etc complete all as specified and directed. Note: Cost of glazing shall be measured and paid separately under relevant item of these schedule.

Supply and Fix ventillater with powder coated anodized aluminium frame of section size 65.5 x 38.10 x 1.5mm and Shutter with section 47.62mm x 44.5 mm x 1.5mm thick half portion fixed with glass and half portion louvered including powder coated aluminium anodised "D" handle, hinges, peg stays, tower bolt etc including jointing cleats for fixing Builder hardware complete all as specified & directed. Note: Cost of glazing shall be measured and paid separately under relevant item of these schedule.

Supply and Fix 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with ' L ' type or ' J ' type or cranked hook bolts complete all as specified and directed.

Fixing only old serviceable 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with ' L ' type or ' J ' type or cranked hook bolts complete all as specified and directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating @ 150 gms/Sqm GI based corrugated steel sheets of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge.

Supply and fix 0.80 mm thick plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings(length and girth as fixed) with grade of zinc coating 120 complete all as specified and as directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating @ 150 gms/Sqm GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges,hips,valley gutters,drip and straight flashing, fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge

Supply and fix Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe 165 complete all as specifed and directed.

Supply and fix Roof trusses (framed) , trussed , purlines, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or Flat section) including distance pieces , cleats etc Fe-410W (Gde E-250 Quality `A' complete all as specifed and directed.

Materials and Labour Mild steel flat iron as in wind tie fencing post/truss and struts incl securing boards, drilling holes, notching for wire etc confirming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply and fix 4mm thick E-board classic any design plain of size 595 x 595 mm fixed as in ceiling over aluminium grid suspended with GI hooks 6mm dia and clamp to hold GI pipe of the following section including taking down old unserviceable one:- a) 25 x 25 x 1.5mm(Minimum thick) aluminium angle. b) 25 x 25 x 1.5mm (Minimum thick) aluminium cross Tee. c) 25 x 35 x 1.5mm (Minimum thick) aluminium main Tee complete all as specified and directed by Engr-in-Charge.

Material and Labour in repair of 16-18mm thick granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wall cladding and like in CM(1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick backing course in CM 1:4 including necessary edge moulding/chamfering (full or half moulding) complete all as specified and directed.

Materials and Labour Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushign neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and as directed.

Material and Labour Vitrified ceramic tiles , dark shade, 10 mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

All as per item No.50.00 here-in-before but on vertical surfaces such as skirtings, dados, risers etc over and including 10mm thick backing course in CM 1:4 complete all as specified and directed.

Material and labour Non skid coloured/printed ceramic tiles 400mmx400mmx7 to 8mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

All as per item No.53.00 here-in-before but on vertical surfaces such as skirtings, dados, risers etc over and including 10mm thick backing course in CM 1:4 complete all as specified and directed.

Material and labour Glazed ceramic colour tiles of size 450 x 300 x 7mm thick on vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid over and including 10mm thick backing course in CM 1:4 complete all as specified and directed.

Material and Labour 25mm thick Pre polished coloured cement concrete chequerred tiles of size 300X300 mm jointed and pointed in neat cement slurry with white or coloured to match including over 15 mm thick screed bed CM 1:4 including taking out old unserviceable chequered tiles with screed bed complete all as specified and directed.

Material and Labour 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

Material and Labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and Labour Rendering 10mm thick cement plaster on ceiling / chajja surfaces without using extra cement finishing fair and even in CM 1:4 including necessary scaffolding and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and Labour Rendering 20mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface in two layers each 10mm thick mixed with integral water proofing compound @ 2% by weight of cement(WPC shall be mixed with top layer only) finished the surfaces even and smooth without using extra cement complete all specified and as directed. Note : - Water proofing compound shall be measured and paid separately as "Supply only" item under relevant item of these schedule.

Material and Labour Acrylic emulsion distemper, two coats over a coat of primer on new internal wall surfaces including necessary preparation of surfaces complete all as specified and as dirceted.

Material and Labour Acrylic emulsion distemper, two coats over a coat of primer on new internal ceiling surfaces including necessary preparation of surfaces complete all as specified and as dirceted.

Material and Labour Exterior emulsion paint ( weather coat), two coats over a coat of primer after complete removal of existing treatment on external wall surfaces of any height complete all as specified and as dirceted.

Supply and fix 5.5 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fix 4 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Material and Labour Synthetic enamel paint, Two coats over a coat of pink primer on new surface of wood or wood based material of any description and in any position exc 10 Cm width or girth including necessary preparation of surfcaes complete all as specified and as directed.

Material and Labour Synthetic enamel paint, Two coats over a coat of red oxide primer on new steel surfaces of any description and in any position exc 10 Cm width or girth including necessary preparation of surfcaes complete all as specified and as directed.

Material and Labour Synthetic enamel paint, Two coats over a coat of red oxide primer on new steel surfaces of any description and in any position n.exc 10 Cm width or girth including necessary preparation of surfcaes complete all as specified and as directed.

Material and Labour Aluminium paint, Two coats over a coat of aluminium primer on new steel surfaces of any description and in any position exc 10 Cm width or girth including necessary preparation of surfcaes complete all as specified and as directed.

Supply and fix 110mm dia PVC(SWR) rain water pipe, single socketed, fixed on walls, ceilings and floors incl GI/PVC clamps, bends sockets etc including taking down old unserviceable PVC pipes with fittings complete all as specified and directed

Supply and fix 110mm dia PVC(SWR) rain water pipe double socketed fixed on walls, ceilings and floors incl GI/PVC clamps, etc including taking down old unserviceable PVC pipes with fittings complete all as specified and directed

Supply and fix 110mm dia PVC(SWR) bends of any radius complete all as specified and directed.

Supply and fix 110mm dia PVC(SWR) junction single, Single T equal or unequal complete all as specified and directed.

Supply and fix in repairs Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor all as specified and directed by the Engr-in-Charge. Make : Parryware Cat No C0123 or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

Supply and fix in repair grating doom 100mm dia of PTMT minimum weight 25 grams complete all as specified and as directed. Make:- Prayag / Polytuf

Supply and fix in repair 15mm Bib Taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : Jaquar Cat part No.CON 037KN or equivalent make from Marc / Kohelar/ Cera.

Supply & fix in repair 15mm Pillar Taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. Make :Jaquar Cat part No.CON 011KN or equivalent make from Marc / Kohelar/ Cera.

Supply and fix in repair 15mm bore stop cock, fancy type, brass chromium plated, concealed type, screwed down high pressure with crutch or butter fly handle screwed both ends with wall flanged fixed to GI pipe complete all as specified and as directed by the Engr-in-Charge. Make : Jaquar Cat part No.CON 087FTKN or equivalent make from Marc / Kohelar/ Cera.

Supply and fix in repair chromium plated shower rose 80 mm size for fixing with 15 mm GI pipe complete all as specified and directed. Make: ESSCO cat No EOS541N or equivalent make from Prayag/ Parryware/ Hindware/ Cera.

Supply and fixing in repair Kitchen sink with draining board made of stainless steel 1mm thick with plug, washer, waste pipe including bedding in cement mortar to wall or including fixing cantiliver bracket and connecting union to pipe over all size 914mm x 460mm bowl size 405mm x 354mm x 203mm including waste coupling and waste pipe complete all as specified and directed. Make- Prayag /Hindware / Nirali/ Diamond

Supply and fix in repair CP Soap dish holder complete all as specified and directed. Make:- Jaguar Cat No. ACN-1131N or equivalent in Parryware, Cera, MARC as approved.

Supply and fix in repair PTMT connection 600 mm long fixed to 15mm GI pipe complete all as specified and directed.

Supply and fix in repair flush pipe of polyethene of low or high density or PVC, 32 mm dia, for low level flushing cistern complete all as specified and directed.

Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed. Make : Parryware Model No C-8090 or equivalent model of make “Hindware/ Cera”.

Supply and fix tubes 15mm bore medium grade galvanized with all fittings and fixed complete to wall and ceiling or laid in floors including taking down old unserviceable GI tubing with fittings complete all as specified and directed by Engr-in-Charge.

All as per item No.86 here-in-before but 20mm bore.

S&F Rotational moulded HDPE water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position,tripple layered ISI marked complete all as specified and directed including taking down old unserviceable tank .

Supply and fix 580x435 size vitreous china wash basin white including 32 mm waste coupling of PTMT (half or full threaded, minimum weight 45 gms), waste pipe low density polyethylene pipe 32mm bore and brackets including taking down old wash hand basin alongwith fittings all as specified and as directed. Make:- Hindware Cat No. 11027 or equivalent of approved make in Jaguar, Cera, Prayag.

Supply and fix in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Supply and fix Ball valves high pressure of PTMT 20mm bore with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms) complete all as specified and as directed, Make:- Prayag / Polytuf

Supply and fix in reapairs Ball valves high pressure of PTMT 20mm bore with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms) complete all as specified and as directed, Make:- Prayag / Polytuf

Supply and fix in repair PVC Cabinet Mirror of size 450 x 350 mm fixed to wooden plugs with chromium plated brass screws and cup washers. including taking down old one complete all as specified and directed by Engr-in-Charge. Make:- Prayag/ Essco.

Supply and Fix double action floor spring hydraucally regulated made up of min 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made up of mild steel heavy duty and fixed.

SANTOSH INTERNATIONAL

SMART CONSTRUCTION

Tractors Machinary Components

DGR CONSTRUCTION