Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.9 LAccepted-AOC 142 JAGJIVANRAM NAGAR GAROBA MAIDAN NAGPUR 440008 | NAGPUR | NAGPUR | MAHARASHTRA | 440008 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹9.2 L+₹31,307 (3.51%)Rejected-Finance | L2 | Rejected-Finance Being higher bidder | |
| 3 | L3₹9.6 L+₹69,405.50 (7.77%)Rejected-Finance | L3 | Rejected-Finance Being higher bidder |
Tender Value
₹11.3 L
EMD Value
₹22,550
Closing Date
23 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) Agra
HQ CWE (AF) Agra PIN 282008
PROVN OF REST ROOM FOR DUTY ARMOURER ALONGWITH WASH ROOM AND ALLIED SERVICES AT AF STN SONEGAON
2024_MES_650597_1
80023-40/E8
Open Tender
Civil Works
Item Rate
180 days
AGE(I) Air Force Sonegon Nagpur
As per Tender Documents
8 documents required · 8 mandatory
₹500
AGE (I) AF Sonegaon Nagpur
₹22,550
Yes
15 Jun 2024
20 Apr 2024
30 May 2024
20 Apr 2024
23 May 2024
4 May 2024
Amount
Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr depth for foundation etc or for column footings, manholes etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and directed.
M &L for Plain cement concrete in foundation filling type D-2 1:4:8 (40mm graded stone aggregate) and mass concrete complete all as specified and directed.
Removing excavated material exceeding. 1.5 KM but not exceeding 5 KM and depositing where directed complete all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layer not exceeding 25 cm thick using soil complete all as specified and directed.
S & F for TMT bars 10 mm dia and over, cut to length bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to IS complete all as specified and directed.
All as per Item No 5 Above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders quality confirming to IS complete all as specified and directed.
M&L for RCC (Nominal Mix) Type B-1, 1;2:4 (20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; linth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC (Nominal Mix) Type B-1, 1:2:4 (20mm graded stone aggregate) beams, cantilevers, bressummers, lintels over 1.5m span and other similar bands, etc. complete all as specified and directed.
M&L for RCC (Nominal Mix) Type B-1, 1;2:4 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for RCC (Nominal Mix)Type B-1, 1;2:4 (20mm graded stone aggregate) in Chajjas complete all as specified and directed.
M&L for RCC (Nominal Mix)Type B-1, 1;2:4 (20mm graded stone aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed.
M & L for Brickwork with fly ash bricks old size straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.
M & L for rough finished Formwork to surfaces of concrete flat sides of concrete foundations, footing , bases of columns, raft and raft beams , sides and soffits if any of foundation and plinth beams and similar work complete all as specified and directed.
M & L for rough finished Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M & L for rough finished Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.
M & L for rough finished Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.
M & L for rough finished surfaces of concrete form work square or rectangular to sides of pillars, posts, struts, columns and stanchions circular on plan complete all as specified and directed..
S & F rolled mild steel roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing, confirming to Fe 410 - W including distance pieces, cleats, etc.complete all as specified and directed.
S & F Plates (plain) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of FE 410-W(Gde-E-250) complete all as specified and directed.
S & F MS screw bolts of dia 11-15 mm ( machine made ) with hexagonal or square at one end and screwed with other end or screwed both ends length of bolt not exceeding 5cm long complete all as specified and directed.
S&F Pre -painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screwed complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for 10 mm thick rendering in CM (1:4) on brick/concrete surface finished even & smooth without using extra cement complete including WPC @ 3% by weight of cement complete all as specified and directed.
M&L for rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 to be finished even smooth with out using extra cement complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement complete all as specified and directed.
M&L for applying three coats of white wash on newly plastered surfaces on wall after necessary preparation of the surface, complete all as specified and directed.
M&L for applying two coats of distemper oil emulsion over a coat of suitable primer on newly plastered surfaces on wall including necessary preparation of the surface, complete all as specified and directed.
M&L for applying three coats of white wash on newly plastered surfaces on ceiling after necessary preparation of the surface, complete all as specified and directed.
M & L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over and including a coat of pink primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection complete all as specified and directed.
M&L for hardcore of gauge not exceeding 63mm,deposited, spread and leveled in layer not exceeding 15cm thick, watered and rammed to true surface complete all as specified and directed.
M&L for 100mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.11 sqm but not.exceeding 0.18sqm in floor etc,over 15 mm thick screed bed in CM(1:6),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.
M &L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and directed.
M &L for Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surfaces complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fix in opening complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, & fixing in frame complete all as specified and directed.
M&L Steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.
S&F MS frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders & for staging of water tank etc and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed.
S & F Pressed steel frames for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.
S&F MS flat iron, bent to shape as required for small articles, such as hold fast, clamps and any necessary items complete all as specified and directed.
S&F 35 mm thick 2nd class HW Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
S & F GI wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm in metal/wooden almunium frames complete all as specified & directed by the Engg-in -charge .
S&F Steel windows with side hung shutters including projecting type hinges,with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded, complete all as specified and directed.
S&F Steel windows with side hung shutters including projecting type hinges, with steel handle, and steel peg stay, complete without glazing bars dovetailed or welded, complete all as specified and directed.
S & F mild steel medium weight cold rolled butt hinge 100mm size complete all as specified and directed.
S & F Aluminium Handle of 150mm size cast type anodised complete all as specified and directed.
S & F Aluminium anodised, barrel tower bolts of extruded section and fixed (150mm long) complete all as specified and directed.
S&F Aluminium alloy anodised sliding door bolts 200 mm long with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S &F 3mm thick glass sheet ordinary quality & fixing with Oil putty in squares n exc 0.50 sqm in each pane complete all as specified and directed.
S &F 3mm thick figured glass sheet ordinary quality & fixing with Oil putty complete all as specified and directed.
S&F in vitreous china wash basin, white flat back size 630x450mm including waste, chain & plug and porcelain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or erecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc. with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe fitted complete all as specified and directed.
S & F Vitreous china wash down water closet pan ( Pedestal pattern) white fixed in floor including P or S trap, connecting to drain ( or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints etc. complete all as specified and directed.
S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.
S & F PVC flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle, including bracket and 38mm dia flush pipe of polyethylene for low level cistern complete all as specified and directed.
S&F GI tubing medium grade with all fitting and fixed to wall ceiling or laid in floor etc complete of 20 mm dia bore pipe complete all as specified and directed.
S&F GI tubing medium grade with all fitting and fixed to wall ceiling or laid in floor etc complete of 15 mm dia bore pipe complete all as specified and directed.
S&F 20mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.
S&F , 15mm bore, bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.
S&F 15 mm dia pillar tap fancy type with capstan heads chromium plated screwed down, high pressure with or without lettered "Hot or Cold with long sereuled shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.
S&F 500 ltr capacity Rotational moulded polyethylene water storage tank tripal layer (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I, including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.
S&F 75 mm dia outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
M&L PVC(SWR) pipes 110mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall complete all as specified and directed.
M&L PVC (SWR) bend any radius 110mm dia complete all as specified and directed.
M&L PVC(SWR) Tee any radius 110mm dia complete all as specified and directed.
S&F PVC(SWR) P trap of 110mm dia complete all as specified and directed.
S & F PVC connections suitable for 15 mm dia pipe with PTMT nut of length 450 mm complete all as specified and directed.
S&F 15mm dia stop valves fancy type, chromium plated complete all as specified and directed.
S &F shelf of PTMT Fixed with and including CP Brass screw and wooden/plastic cleaps complete all as specified and directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed .
S & F CP tubular towel rail, 20 mm dia, D Type, 60 cm long between flanges complete all as specified and directed.
M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in roof kerb or mud stops and side of path and the like including weathering, slightly rounded or chamfered angles and throating for internal surface channel complete all as specified and directed.
M& L for Non asbestos designed fiber cement building boards 6 mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.
S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
S & F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.
M & L for bedding layer of mortar 10 mm thick in CM 1:4 mixed with WPC over roof slab when concrete is green as per manufacturer instruction, complete all as specified and directed.
Excavating over areas, not exceeding 1.5 m deep and getting out in soft/loose soil etc complete all as specified and directed.
M & L for Moorum/red bajri filling in floors or paving's, laid in layers n exc. 15 cm thick, spread, leveled and rammed including watering complete all as specified and directed.
M & L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
M & L Brickwork with fly ash bricks old size straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.
M&L for 15 mm thick rendering in CM (1:4) on brick/concrete surface finished even & smooth without using extra cement complete including WPC @ 3% by weight of cement complete all as specified and directed.
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l ,using 20 mm graded stone aggregate smooth finished, and reforming benching as required for 100 mm internal dia of pipe complete all as specified and directed.
M & L for precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4, complete all as specified and directed.
M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in roof kerb or mud stops and side of path and the like including weathering, slightly rounded or chamfered angles and throating for internal surface chanel complete all as specified and directed.
M&L PVC(SWR) pipes 110mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall complete all as specified and directed.
M & L Cement Concrete bed to drain pipes including packing under and completely surrounding pipes for 100 mm dia with concrete after they are laid and tested in trench complete all as specified and directed.
Removal of excavated materials to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.
Supply and laying of 40 mm dia bore GI tubing medium grade with all fittings including cutting for branch line & making threads complete fixed to wall/flooring /ceiling etc or laid in trenches complete all as specified and directed.
Supply and laying of 20 mm dia bore GI tubing medium grade with all fittings including cutting for branch line & making threads complete fixed to wall/flooring /ceiling etc or laid in trenches complete all as specified and directed.
Supply and fixing 40mm bore gun metal globe or gate valves with iron wheel head screwed both ends for GI pipe complete all as specified and directed.
Supply and fixing 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for GI pipe complete all as specified and directed.
M & L for fine dry sand cushioning to under ground electric cable complete all as specified and directed.
Supplying & laying of bricks old sub class "B" bricks as in cable protection complete all as drected .
Supplying & laying GI Tubing 40 mm dia Light grade pipe with connecting accessories complete in trench for road and on surface/,wall for protection complete all as specified and directed.
Earthing complete with galvanized earth plate electrode 60 cm x 60cmx 6 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth lead wire 4.0 mm dia by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel, wire gauge. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point complete all as specified and directed on testing on completion.
Supply and laying & testing and commissioning LT underground cable 10 Sqmm x 2 core size 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi strand aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified and directed. Note :- Excavation shall be measured and Paid separately
M &L for PVC concealed conduit point wiring with 1.5 square mm nominal area stranded copper conductor PVC insulated single core cable1100 Volts grade conforming to IS694 part-i draw in 20 mm size PVC conduit in concealed including 600volts grade 1.5square mm copper stranded single core cable green color PVC insulated for continuous earthing wire with complete chess cutting ,S/F of 20 mm dia PVC conduit with elbow,bends,couplers,tee, sunken boxes pressed steel boxes made out of not less than 1.6 mm thick sheet mounting fitting/junction boxes et. covered with 2.8 mm thick white laminated bakelite sheet (ISI marked), including painting outer side with one coat of bitumenus paint and inside a coat of red oxide primer covered the conduit with cement mortor after drawing of electric cables and making good of disturbed surfaces and match with existing complete all as specified and directed.
(a) One light/fan point controlled by one switch complete all as specified and directed.
(b) One three pin 5 Amps switch socket outlet on independent board complete all as specified and directed.
All as per item No 101 above but point wiring with 2.5 sqmm multistrandard copper cable for 5 Pin 15 Amp switch socket combination on Independent board with one run of 2.5 sqmm multistranded copper cable green colour for earth continuity conductor complete all as specified and directed.
S&F switch piano, flush type single pole,5 Amps, 240 Volts AC complete all as specified and directed.
S&F ceiling rose surface backlite, 65x50mm, three terminals, 5 Amps,240 Volts AC complete all as specified and directed.
S&F switch socket combination 5 Pin,5 Amps,240 Volts, flush type complete all as specified and directed.
S&F switch socket combination 2 IN 1, 3 PIN,5 and 15 flush type universal ,240 Volts, complete all as specified and directed.
S & F fan step regulator ,120 W complete all as specified and directed.
S & F Sheet metal enclosure for MCB DBs SPN 4 Ways , 240 volts, Double door type powder coated with 200 Amps rated bus bar, neutral link, earth rail & din rail, ISI marked , complete all as specified and directed.
S & F MCBs 'C Series' of capacity SPN 32 Amp 240 volt, complete all as specified and directed.
S & F MCBs 'C Series' of capacity SP 06 Amp to 32 A 240 volt, complete all as specified and directed.
S&F Ceiling fan complete with three blade, down road, accessories 230 V, 1200 mm sweep, with squirrel cage induction motor , energy efficient 5 Star rated with connecting up with copper 3 core flexible cord of minimum size 0.5 Sqmm size complete all as specified and directed.
S&F Exhaust fan made up of sturdy Engineering plastic complete with louvers shutter , voltage 230 V, 50 Hz, RPM 1200 , Cooper winding of sweep 300 mm with connecting up with copper 3 core flexible cord of minimum size 0.5 Sqmm size complete all as specified and directed.
Supply and fix LED tube light fitting capacity 20 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector complete rewired with multistranded copper cable & connecting to ceiling rose with 3 core ,flexible cord of minimum size 0.5 Sqmm size complete all as specified and directed. Make: CGCta No-LDL-20-NW/wipro/CG/Havells/philips/Bajaj.
S & F 25 Watt LED Bldg security light with a nominal system. The luminaries should have cool white colour temperature (CCT>5000K) and a CRI>70. The luminaries shall meet IP66 rating with THD<20% & pf>0.9. The luminaries housing should be made of pressure die cast aluminimum. The total power consumption should not exceed 35W (including driver) pre wired with connecting up with copper 3 core flexible cord of minimum size 0.5 Sqmm size and testing complete including GI Pipe bracket made of 40 mm dia bore light grade not less then1.5 m and fixed with 2 Nos clamps made of 50X6 mm flate iron and two bolts with nuts etc complete all as specified and as directed.
chronicle enterprises
PURVA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .