EEE/SZ/2023-24/Nit.58

Amount

Approved Rates (Part A)

122.1.3:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*10 sqmm

122.1.48: Supply of following size of PVC insulated & PVC sheathed copper conductor 3 core submersible cable conforming to IS . 694/210 etc. as rqd. 3×2.5 sqmm with voltage grade 1100 volts.

122.2.4:SITC of Pillar box size 900 mm x 450mm x 250mm suitable for mounting incomer of 250 A MCCB/Main switch 4 Pole and energy meter 3 phase complete with eluotropic grade Aluminium bus bar of size 25mm x 19 mm mounted on galvanized M. S. body power quoted pilferage proof SMC door duly welded with S.S. with rain cover size 40mm x 40mm x 5mm x 600mm height in cutting 300 mm height below ground and covered with shode proof SMC sheet of 3 mm as required.

122.2.10.a:Providing and laying in position M25 grade reinforced cement concrete foundation of size 450 mm (L) ×450 mm wide and 1000 mm deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia- 960 mm long(approx)-8 nos. and reinforcement of cold twisted bars of 8 mm dia- 1400 mm (approx) -6 nos.(with 150 mm spacing) as required with supplying and positioning of 4 nos. foundation bolts 16 mm dia,600 mm long, J type i/c 2 nos. template anchor plates of size 225mm×225mm×3mm and providing DWC HDPE for cable entry and exit as required for 3 m and 5 mtr pole.

122.2.24:Providing and laying of HDPE PIPE OF 40mm outer dia with PN 4 rating by hand Moling/Mannual method Confirming to IS 4984 592

122.2.25:Providing and fixing of Stainless steel name plate of size 6×8 sq inch made of 20 gauge sheet including engraved name of area representative duly painted along with SS clamp nut bolt etc as required

122.2.120:Supplying and fixing 63A, 4 Pole rating, 415V, and 10KA ''C Curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB Complete with connections, testing and commissioning etc. as required.

122.2.133:Providing and Fixing of Flexible LED Strip light fixtures suitable for rated voltage 220 Volt 50 HZ supply, in White/Green/Red/Warm White Color including all accessories like connectors, Endcap, Holding Cap and Connector Pins but excluding integrated LED adaptor etc as required.

122.2.134:providing and Fixing of integrated LED adaptor for flexible LED strip light fixture suitable for rated voltage 220 volts 50 HZ supply etc as required.

122.2.19:Fabrication,Supplying,Installation,testing,Commissioning of 12 mtr high mast System with its accessories ,Mast shaft shall be in one section , hot dip galvanized 4mm thick(Single dip ) inside & out sides &suitable for wind velocity as per IS 875 part3 .There shall be in longitudinal seam weld per section and No circumferential weld. It should also included accessories For High Mast head frame ,2 point suspension system, 5*2.5 sqmm Cu conductor with steel wire rope 5mm dia. (7/19construction) single drum winch ,galvanized lantern carriage arrangement suitable for 4/6 Nos. Flood Light luminaries symmetrically And its control gears boxes and lighting finial ,the mast shall have integral type manual tool mounted at the base compartment of its raising and lowering operation with foundation bolts and Anchor plate and control panel housing suitable RCC (1:2:4) shallow foundation of size 1m(L) x 1m wide and 2m deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia -2100mm long (approx.) - 16 nos.and reinforcement of cold twisted bar of 8 mm dia - 3700 mm (approx.) - 13 nos. (with 150 mm spacing) as required with positioning of foundation bolts and providing DWC HDPE pipe for cable entry & exit as required for the high mast considering The safe soil bearing capacity at site as 10T/sqm at 2mts. Depth with all material i/c 4Nos S.P MCB,63Amp.DPIsolator etc as reqd. Logo/Name of manufacturer shall be embossed on the pole. Galvanization as per relevant IS.

122.2.156.(b):P&F following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable confirming to IS.694/1990 etc. as reqd. 3x 4 sq.mm

OD5990/2023-2024:Supply, installation, testing and commissioning of 9W/12W LED bush/spike light (with mounting pipe) with die cast aluminium housing with toughened glass suitable for ground mounting enclosed with glass cover in frame , mounting bracket provided for aiming the object . High ingress protection against dust & moisture , corrosion resistant coated and IP 65 /66 protection as required. a) Lumen Efficacy > 90 lm /watt. b) PF> .95. c) Rated Voltage =220-240 VAC, 50 Hz

OD5992/2023-2024:Supplying and laying of following size of C PVC pipe in along with all accessories like socket, bend, couplers etc. confirming to IS :4985:2000, part-II complete with fitting and cutting, jointing etc. direct in groung (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 25 MM dia

OD5995/2023-2024:Fabrication,supply and erection of 5 metre height MS decorative street light pole with attached name plate of suitable size including engraved name of area representative with desired colour. The pole is straight line with zigzag arm with fixed mild steel bottom plate of size 300x300x10mm thickness & also inbuilt service window of 300 mm x 100 mm at 800 mm above the base plate on existing cement concrete pedestal as required with a heavy duty 4 way connector including earth connector & 6 A SPMCB. Pole & brackets dimension is 145x82x3mm thick. Logo and name of the manufacturer shall be embossed on the pole.The pole should be primer coated and PU painted. As per diagrams attached.Single arm bracket of size 1000 mm long with high lumen LED module made out of pressure diecast aluminum with polycarbonate diffuser attached (1x60 W), I P rating IP 66. a ) Total system wattage =60W +/- 5% b) Luminous efficacy >= 100 Lm/w ( c) Power Factor >= .95 with minimum 03 years warranty on LED lights and accessories etc. ( LED light and driver- Superior Make)

OD5996/2023-2024:Fabrication, supply and erection of 5 metre height MS decorative street light pole with attached name plate of suitable size including engraved name of area representative with desired colour. The pole is straight line with zigzag arm with fixed mild steel bottom plate of size 300x300x10mm thickness & also inbuilt service window of 300 mm x 100 mm at 800 mm above the base plate on existing cement concrete pedestal as required with a heavy duty 4 way connector including earth connector & 6 A SPMCB.Pole & brackets dimension is 145x82x3mm thick. Logo and name of the manufacturer shall be embossed on the pole.The pole should be primer coated and PU painted. As per diagrams attached. Double arm bracket of size 1000 mm long with high lumen LED module made out of pressure diecast aluminum with polycarbonate diffuser attached (2x60 W) with 1600 mm spacing between the brackets at top, I P rating IP 66 , a ) Total system wattage =120W +/- 5% b) Luminous efficacy >= 100 Lm/w ( c) Power Factor >= .95 with minimum 03 years warranty on LED lights and accessories etc. ( LED light and driver- Superior Make).

OD5997/2023-2024:Fabrication,supply and erection of 5 metre height MS decorative street light pole with attached name plate of suitable size including engraved name of area representative with desired colour. The pole is straight line with zigzag arm with fixed mild steel bottom plate of size 300x300x10mm thickness & also inbuilt service window of 300 mm x 100 mm at 800 mm above the base plate on existing cement concrete pedestal as required with a heavy duty 4 way connector including earth connector & 6 A SPMCB. Pole & brackets dimension is 145x82x3mm thick. Logo and name of the manufacturer shall be embossed on the pole. The pole should be primer coated and PU painted. As per diagrams attached. Single arm bracket of size 1000 mm long with high lumen LED module made out of pressure diecast aluminum with polycarbonate diffuser attached (1x60 W,1x30W) , double side throw I P rating IP 66 , a ) Total system wattage =90W +/- 5% b) Luminous efficacy >= 100 Lm/w ( c) Power Factor >= .95 with minimum 03 years warranty on LED lights and accessories etc. ( LED light and driver- Superior Make)

122.2.26:Providing and fixing FRP Fencing at Electrical Installations with necessary concreting for grounding vertical post, hardware. Accessories, fitting, etc of 2000 mm height above the ground and 300 mm grounding in ground minimum along with fencing 1 number of FRP gate with necessary hardware, accessories, brass/stainless steel metal lock fittings etc of suitable length, width & height, width & height i.e. 1 number gate as per site requirement.

OD7334/2023-2024:Fabrication, supplying, installation, testing and commissioning of openable Signage made of electrocut computerised automated individual letters in hindi & English, total Covering Area and design as per direction of Engineer in charge, Letters to be made from powder coated sheet with 100-150 mm bottom profiles bended along 4-5mm thick sheet of unbreakable Acrylic Sheet to be used in front which will be pinned to the profile. Approved Color, Vinyl (UV) to be used for Colorful look on the front of Acrylic sheet, Letters back should be duly powder coated/painted with Primer & two coats of approved Color Enamel or Duco paint. The signage shall have a system for easy graphic changes and easy access for maintenance. The illumination source shall be of LEDs or approved equivalent modules with individual current regulator/power supply driver module for every signage complete with all internal wiring etc along with connectors for connections to achieve required and uniform illuminations, specifications and design as per the directions of Engineer in charge. LED specification :Lumen output : 2500 lumens/sqmtr (minimum) radiance angle : 120 degree and above Illumination should be uniform and suitable arrangement should be made for installation of the whole structure using Gi pipes, angles etc but excluding foundation work.

Civil items (Part A)

110.10:Providing and fiving name board made of MS Sheet 90x60cm, 1mm thick with frame of MS angle 50x50x6mm, two diagonal braces at the back of the sheet of MS flat 40x6mm, total height of the board above ground level 2.40m, length of legs below ground 0.30m embedded in CC block 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) 30x30x45cm including excavation and removal of surplus earth with in 50m lead, applying priming coat of approved steel primer, painting with synthetic enamel paint of approved quality and lettering with enamel paint of approved colour (one side) as per drawing/direction of Engineer-in-Charge

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

13.2.1:15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand)

6.1.1:Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)

13.26:Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

DSR 2022 E & M

OD8962/2023-2024:14.6 Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.

OD8963/2023-2024:12.37 Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.

OD8964/2023-2024:2.10.3 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole

OD8965/2023-2024:2.10.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

OD8966/2023-2024:5.18 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

OD8967/2023-2024:5.12 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

OD8968/2023-2024:5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

OD8969/2023-2024:1.17.3 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 1.5 sq. mm

OD8970/2023-2024:7.6.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. upto 35 sqmm

OD8971/2023-2024:7.5.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

OD8972/2023-2024:2.21 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

OD8979/2023-2024:14.16.1 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

OD9002/2023-2024:12.42 Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Iluminators And Circuiteers

Repair Shop

Bidder Name

SACHDEVA ELECTRICALS

Iluminators And Circuiteers

Repair Shop