WBPWD/SEWEC /BRED /NIQ-70 /2025-26

SUB-HEAD 1--DISTRIBUTION WIRING Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precisionmake), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/ fan/ call bell point swith Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2no.suitable size “Ph&N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. [1(c)/E-24] a) Average run 6 mtr

Average run 8 Mtr.

Distribution wiringin 1.1KV grade 22/0.3 (1.5sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1KV grade 1x22/0.3 (1.5sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works. On Board [3(a)/E-24]

Average run 4.5 Mtr.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. [1(a)/E-14] a) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

b) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

c) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

d) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. [1/E-9] 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. 25mm size

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. a) 1.5 sq.mm. [NS]

b) 2.5 sq.mm

c) 4 sq.mm

d) 6 sq.mm

e) 10 sq.mm

e) 16 sq.mm

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works. [11/E-4] 150 x 100 x 65

Supply & Fixing bakelite/ perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required [12/E-4] 150 x 100 x 65

SUB-HEAD 2-- TPNDB, SPNDB, MAIN SWITCH, KITKAT Fuse etc. Supply & Fixing of 240 V rewireable, semi enclosed ring socket type Kit-Kat fuse set with Neutral link connection fixed on 1000mm x 40mm x 6mm MS flat sheet having size of open execution type on bakelight sheet with suitable size. [NS] 63A

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/ angle iron frame on wall with nuts bolts etc incl. S&F 3nos. DIN type HRC fuse as per rating. 63A Angle iron frame ( Make- Havels/ L&T/ HPL as per direction of EIC) [4(a)/D-3]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. i) 6 way-Enclosure (607716) ( Make- Legrand/ Seimens/ Schneider or approved make as per direction of EIC) [14/D-10]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. a) 2+16 way [Legrand/sciemens/cabtree as per direction of EIC] [ 13 / D- 9 ]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand] a) 40 A DP [ 6 / D- 5 ]

b) 63 A FP [ 6 / D- 5 ]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS[ Make -Legrand ] i) 6-32A SP [ 7 / D- 6]

SUB-HEAD 3-- EARTHING: Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe. [ 2(a)/G-1 ]

Excavation of soil for installation of Earth Electrode and filling & ramming as per GS. For Soft Soil [1(a)/G-1 ]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. [3(a)/G-2]

Extra for treatment of soil by using salt & charcoal or coke for plate electrode. [3(b)/G-2]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. No. 8 SWG [5(a)(iii)/G-2]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall as per GS. [4(a)/G-2]

SUB-HEAD 4-- PLUGS, SOCKETS, Fuse Link & AC Point: Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [12/E-18]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [5(a)/E-17]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [17 /E-19]

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (forPh,N&E) fixed on bakelite/ Hard Rubber insulator over the MS welded chairs incl. top cover flushed inwall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. [1/E-17] 6 Module

4 Module

Supply & Fixing 240V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [4(a)/E-17]

Supply & Fxing 240V 6A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate andmaking necessary connections as required. [3(a)/E-17]

Supply&Fixing 240V, 16A, 3pinModular type plug socket (Brand approved by EIC), without plug topand switch, on existing GI Modular type switch board with top cover plate and making necy. Connections with PVC Cu wire and earth continuity wire etc. [4(b)/E-17]

Supply & Fixing 240V 16A Modular type switch (Brand approved byEIC) on GI Modular type switch board having top cover plate andmaking necessary connections as required. [3(b)/E-17]

SUB-HEAD 5 -FIXING OF LIGHT FITTINGS Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket as per GS. [ 15 /C-2]

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc. [14(aq)/c-2]

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVCround block / round bakelite on wall/ceiling as per GS [22/D-3]

Fixing only lamp. [11/C-2]

SUB-HEAD 6 - SUPPLY OF LIGHT FITTINGS Supply of 9 W LED bulb on existing batten holder. (Make- Philips/ Surya/ Wipro)

Supply of 4 Ft. 20 Watt single/twin LED light fitting for indoor application, complete with all accessories having following Model / Cat No. (Make: Philips Cat No Tmc 5021XT-LED 22WJaquar Cat No ACI-WHT-LBOX-FTG020XX/Surya Cat No SUB118T8LED ) ( 3 years Warrenty)

i) Double fittings (Make: Philips Cat No Tmc 502PXTLED22W/Jaquar cat No. ACIWHT-LBOXFTG040XX/Surya ) ( 3 years Warrenty)

Supply of 4 Ft. 20 Watt polycarbonated LED light for indoor application, having following Model / Cat No. (Make Philips Cat No MASLEDTUBE1200mm 18W865T81-2100lm/Jaquar Cat No BTI-WHT-LTBL01X020WC/Surya Cat No SLETLDS20PCREFORM(NANO) ). .( 3 years Warrenty)

SUB-HEAD 07 -- FIXING OF FANS Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 23 cm (9") [ 28(a)/C-4 ]

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 9" exhaust Fan. [NS]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [21(a)/C-3]

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board as per GS. [10/E-18]

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification as per GS. [ 29/D-14 ]

SUB-HEAD 8 -- SUPPLY OF FANS Supply & delivery of AC ceiling fans of 1200 mm sweep with burst-proof P2/S3 Capacitor complete with all accessories without regulator. (Make - Crompton HS or equivalent model of Usha/ Havells/ Orient as approved by E.I.C) (with 2 years warranty and warranty certificate to be provided) i) 1200 mm Sweep [NS]

Supply of Exhaust fans complete with all accessories having the following Model / Cat No ( Make -EPC or similar specification of crompton/ Havels as per choice of EIC ). 9"( 230 mm ) Speed 1370 RPM

Supply of 450mm sweep wall bracket fan(high speed) with metal body & blades (Orient - Wall-II Tornado or equivalent cat of CG/EPC/Usha as per direction EIC) with necessary wooden board on wall with nuts, bolts, washer etc.

SUB-HEAD 09--STREET Light, BULKHEAD LIGHT and Cable work Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. [18/C-3]

Supplying & Fixing PVC waterproof type looping cable box (SINTEX/ Hansel As per direction of EIC) size minimum 200x150x100 mm deep comprising of one 240V,10A MCB (legrand make), housing the mcb, one NL on porcelain insulator, two provision of compression type brass cable gland for upto 4- core 16 sqmm PVC/A cable and having lined with rubber gasketted top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole, including S&F 40x6 mm thick, suitable "C" type 4mm thick MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Supply of following PVC/XLPE insulated & Sheathed cables for Working Voltage up to 1100 Volts of following sizes [Make- Havells / Polycab/ Gloster / Currency / KEI / As per choice of EIC] 2 core 10 sq. mm. multy stranded alluminium conductor Armoured cable. (For outdoor light)

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. [2(a)/F-1]

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish. From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/ pavement/wall etc. [5(i)/F-3]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. [PWD/GS Page: F-4 Item: 7/a ] 2 core 10 sqmm Al.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : [8 (b)(iii)/F-5] 2 core 10 sqmm cable

Supply & Fixing of 240V, 60W LED street light with system output of >110 lm/W. Aluminium PDC housing with integrated lens cover that complies with IP66 protection. luminarie complete with SPD (Surge Protection Device) with all accessories on existing MS Pipe/Mini Pole/Long Pole as per direction of E.I.C. (Make- Surya / Philips/ Jaquar as per choice of EIC ) [NS] with 5 years Warrenty.

Supply & Fixing of 240V, 30 W LED for street light with system output of >110 lm/W. Aluminium PDC housing with integrated lens cover that complies with IP66 protection. luminarie complete with SPD (Surge Protection Device) with all accessories (Make- Surya/ Philips/ Jaquar/ as approved by EIC) on existing MS Pipe/Mini Pole/Long Pole as per direction of E.I.C. with 5 years Warrenty.

Supply & Fixing of energy saving LED Bulkhead made up of Poly carbonate housing with diffuser light fitting for outdoor application, complete with all accessories with 10 watt LED Lamp (Make- Surya, or equivalent model of Philips/ as approved by EIC) [2 nos. each for 9 nos. of quarter]/Jaquar

SUB-HEAD 10--MISCELENEOUS Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board. [ 20 (c)/D-13 ]

S&F outdoor light timer febricated with double door 2+8Way SPNDB as per L&T (Cat no-LTSDO8N) i) 240 V, 32A DP MCB of breaking capacity 10KA & ''C'' Charecteristic (L&T)-1 No, ii) 25A 2P modular power contactor with (L&T, Cat no-AUMC2002501-2P,)-1 No, iii) Digital timer switch (L&T, cat no- AUTS02DIG00)-1 No [NS], iv) Toggle Switch -- 1no, v) Necessary Socketing & connection with copper wire etc as per direction of EIC. (For outdoor light)

SITC of Polyvinyl type Glow Sign / Indicating Board of Size 5'X3' Made with back cover GI Sheet front cover polyVinyl side cover alluminium channel and S&F of 2feet 4 nos 20 watt tubelight (IP-66/65) fixed inside the board, including fixing the sign board on the C-channel structure should be fixed on column of main gate by drilling hols and making cc base under it , S&F 3x1.5 Sqmm FRLS PVC insulated & unsheathed copper wire .The Board Letterings will be given letter on by EIC.

Dismantling main switch, switch board, existing wiring & unservisable materials incl. Mending good the damaged of building works and submit those materials to the concerned authority by one electrician, one no masson and one no helper as per instruction of EIC. (G+1 Building, Total 13+ room)

Please Enable Macros to View BoQ information