REPAIRS TO SUNKEN FLOOR, DADO, SOIL WASTE VENT AND WATER SUPPLY PIPES, SANITARY FITTINGS, PLUMBING INCLUDING OVER HEAD CLEANING UNDER ZONE D AREA AND REPAIR REPLACEMENT OF WOODEN ALUMINIUM STEEL JOINERY AND CONNECTED WORKS IN ZONE D AREA UNDER GE(EAS

Amount

Taking down cement or cement lime plaster on brick or stone walls, etc. including racking out joints,hacking for key,scrubbing down with water, etc complete.

M&L rendering 15mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound hydroseal-W+ / Dr Fixit or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.

M&L for Rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified.

M&L for Rendering 5 mm thick in cement mortar 1:3 on ceiling surfaces & surface finished even and smooth without using extra cement.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparing newly plaster surface of wall and applying three coats of white wash complete all as specified.

M&L for preparing newly plaster surface of ceiling and applying three coats of white wash complete all as specified.

M&L for preparation of old plastered surface of wall and applying two coat of distemper oil emulsion over a coat of alklai resitant primer on wal surfaces complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises.

M&L Coloured Non - skid Ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over & including 15mm screed bedding in cement mortar 1:4 complete all as specified.

M&L for Glazed ceramic tiles on vertical surface 350x250x7mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified.

S&F Vitrified ceramic coloured tiles 10mm thick (square/ rectangular) area of each tile exc 0.18Sqm but not exceeding 0.36Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15mm thick screed bed or bedding completed all as specified.

All as per item No 14 above but on vertical surfaces as in skirting over and includig 10mm thick backing coat in CM 1:4 complete all as specified.

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed by Engineer - in - Charge.

M&L for PCC M-5 grade (Nominal mix) using 40 mm graded stone aggregate as in filling into sunken floor complete all as specification as directed by Engineer - in - Charge.

M&L for 75mm thick PCC M-15 grade (Nominal Mix)using 20mm graded stone aggregate as in plinth protection finishing the surface even and smooth using extre cement.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim all as specified and as directed.

S&F in repair Vitrreous china wash down water closet pedestral pan white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, Plstic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hing devices complete all as specified. Make- Commander/Hindware/Parry ware.

S&F in repair, 10 liter capacity low level PVC valveless, syphonic action type flushing cistern, white, with inlet, ball valve, flush pipe, float and handle including brackets etc complete.

S&F in repair 32 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/ cm2 fixed complete to walls for WHB/ Urinal waste pipes.

S&F in repair Toilet paper holder fixing to wall complete all as specified.

S&F in repair CP health facet with 1m long easy flex tube in chrome finish & wall hook Cat No : ALD-565 of Jaquar or equivalent.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including 15 mm Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure complete all as specified and as directed.

Taking up or down 15 mm bore of steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

M&L cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified.

Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed

Taking up or down 20 mm bore of steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed

Supply and fix in repair 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete.

Supply and fix in repair 750 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete.

Supply and fix in repair 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20mm bore (Minimum weight 210 gms) complete.

Cleaning of HDPE tank of capacity up to & including 500 Litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as directed.

S&F in repairs monkey protection type cover for HDPE water tank of capacity 500/1000 ltrs rotating type including frame including nut bolt for fixing complete.

S&F in repairs 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 g ms) complete.

S&F Gun matel, globe or gate valves 20 mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed as specified.

S&F in repairs bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe or brass ferrule and fixed fency type chromium plated 15mm bore.

S&F in repair 15mm dia bore chromium plated Angle cock/valve cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F in repairs 15 mm dia brass chromium plated pillar tap long shank with fly nuts capastan head screwed down high pressure with or without letter hot or cold with long screwed shank complete.

S&F PVC connection 15mm size with brass nut of 600mm long.

S&F in repair wash basin mixer 15mm bore all as specified,

S&F in repair stop cock/ value fancy type cromium plated screwed with ends for iron pipe or uinon & fixed of 15 mm dia.

S&F in repair 15 mm dia two way angle cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.

S&F in repairs 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed.

S&F for brass chromium plated tubular towel rail, 20mm dia ‘D’ type 60cm long between flange complete all as specified and directed.

S&F in repair PVC cabinet with mirror, of size 350 mm x 450 mm, fixed to wall with screw all as specified and as directed. Make:- Prayag Cat No 551 or equivalent of make Commonder / Neelkamal / Polytuff

S&F in repair chromium plated shower rose with 240mm long arm.

S&F in reapirs CP curtain rod 20 mm dia with necessary brackets including CP decorative end holders.

S&F in repair stainless steel kitchen plate rack of size 775x750x250mm deep, fabricated with 1mm thick sheet fixed in position on wall complete. Make:- Prayag cat No P-346 or equivalent make specified in Appx 'B'

S&F in repair 110mm bore PVC (SWR) pipe type 'A' single socketed in any length with rubber ring joints fixed ot walls incl necessary clamps etc.

S&F in repair 75mm bore PVC (SWR) pipe type 'A' single socketed in any length with rubber ring joints fixed ot walls incl necessary clamps etc.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified.

S&F PVC (SWR), junction single, (Single T) equal or unequal with acess door 110 mm bore complete all as specified.

S&F PVC (SWR), vent cowl 110 mm bore complete all as specified.

S&F PVC (SWR) bends any radius 75mm borecomplete all as specified.

S&F 75mm dia PVC (SWR) bends any radius with oval access borer complete all as specified.

S&F in repair PVC (SWR) floor trap plain with S S grating including jointing with solvent cement dia of out let 75 mm.

S&F in repair waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms)

S&F in repairs PVC flexible waste pipe 32 mm dia.

S&F in repairs PVC flexible waste pipe 40mm dia.

M&L for 18-20mm thick machine cut machine polished kota stone slab flooring over cement screed bed laid and jointed with pigments to match the shade of the slabs including rubbing and mirror polishing complete over and including 15mm thick screed bed or bedding layer of cement mortar 1:3, all as specified and directed by Engineer-in-Charge.

M&L 18-20mm thick machine cut machine polished kota stone slab in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item above including 15 mm thick cement plaster use CM 1:3. complete all as specified and as directed.

M&L 20mm thick Granite (of any type) black colour (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen and laboratry with plugs, washers and waste including bedding n cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm copmlete.

S&F in repairs Stainless steel sink with draining board made out of 1.0 mm thick sheet for kitchen incl waste pipe CI cantilever brackets and waste coupling etc complete and making good to the side of wall,connecting union to pipe, including bedding in CM to dwarf wall. Overall size 915mmx460mm bowl and size 410x330x160mm complete.

S&F in repairs 15mm bore Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm-65gms)

S&F in repairs 20mm bore Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm-65gms)

Taking down chowkhat or frames with shutters without taking off shutters from frame area n.exc 1.50 Sqm each.

Taking down door chowkhat or frames with shutters withouttaking off shutters from frame area exc 1.5 sqm and n. exc 4 Sqm each.

S&F 105x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

S&F 125x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

M&L for PCC M-10 grade (Nominal mix) using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified

S&F 35mm thick flush shutters,solid core construction with block board core and plywood face panels, commercial type on both sides all as directed.

S&F 35mm thick factory made glazed and skeleton shutters of 2nd class HW, open rebated and prepared to receive glass/gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR pt-1 section 8.20 (a) all as specified.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforcement with MS square tube supplying and fixing in opening as per specification & sketch shown in sketch 8 of SSR part II.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck indie with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fittied in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F 150mm size aluminium anodised, barrel tower bolt of extruded section completed.

S&F in repairs 150mm size aluminium anodised, barrel tower bolt of extruded section completed.

S&F 250mm size aluminium alloy, anodised sliding door bolts with hasp, stape (bolt type) and fixing of clip and sheet cast or extruded section and fixing bolts and sliding bolts and extruded section complete all as specified.

S&F in repair 250mm size aluminium alloy, anodised sliding door bolts with hasp, stape (bolt type) and fixing of clip and sheet cast or extruded section and fixing bolts and sliding bolts and extruded section complete all as specified.

S&F Aluminium handles, cast type, anodised 150 mm long.

S&F in repairs Aluminium handles, cast type, anodised 150 mm long.

S&F butt hinges, medium weight cold rolled mild steel of size 100mm complete.

S&F in repairs butt hinges, medium weight cold rolled mild steel of size 100mm complete.

S&F Aluminium floor door stopper 2 legs runner shoes at and 150mm long.

S&F in repairs Aluminium floor door stopper 2 legs runner shoes at and 150mm long.

S&F 300mm size mild steel rat tail rod pattern door springs ISI marked including roller & roller plate etc complete.

S&F in repair 300mm size mild steel rat tail rod pattern door springs ISI marked including roller & roller plate etc complete.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded fixed to wall including one shop coat of redoxide primer complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, including one shop coat of redoxide primer complete all as specified.

S&F powder coated (powder coating shall not be less than 50 microns of approved colour) aluminium frame (powder coating shall not be less than 50 microns of approved colour) for windows, ventilators (sliding, fixed or casement) with one or more rebates including joining cleat for fixing etc, complete all as specified.

S&F powder coated (powder coating shall not be less than 50 microns of approved colour) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised alumnium snap beading, screws etc. complete all as specified

S&F Powder coated (powder coating shall not be less than 50 microns of approved colour) aluminium window and ventilator shutters, side hung/sliding type with or without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in position.

S&F in repair, Aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing fixed to aluminium frame in square exc. 0.5 square metre in each pane complete.

Hacking out old broken glass of any thickness size or quality from wooden/metal frame fixed with putty/beading & S&F 3 mm thick sheet glass, plain ordinary quality any size as required at site in each pane complete all as specified.

S&F 4 mm thick sheet glass, ordinary quality and glazing fixed in repairs to aluminium/ Steel/ wooden frame in square exc. 0.5 square metre in each pane complete.

S&F 4mm thick frosted glass, ordinary quality and glazing fixed to aluminium frame in square exc. 0.5 square metre in each pane complete.

M&L Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed in repairs with stainless steel wire staples/ screwed complete all as specified.

M&L for preparation of new wooden surfaces any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of new steel surfaces over 10cm width or girth not other wise described and applying two coats of synthetic enamal paint over a coat of red oxide primer.

M&L for preparation of primed steel surfaces over 10cm width or girth not other wise described and applying two coats of synthetic enamal paint over a coat of red oxide primer.

SHRI RADHAYSHYAM JHA

mh enterprises