CONSTRUCTION OF CONSTRUCTION OF PAVER BLOCK ROAD AT SARDAPALLY FROM THE H/O. - SARDAPALLY KALI MANDIR TO THE BOTHRA COMPLEX, WARD NO. -07, BOOTH NO. 149, WITHIN ISLAMPUR MUNICIPALITY, UNDER THE APAS PROGRAMME. APAS ID - APS/01/029/149/0007

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (i) Pakur Variety

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation

(c) Supplying and Laying in the specified pattern of Interlocking Concrete Block Pavements (ICBP) with concrete blocks (with Concrete grade as specified as per Table 1 of IS 15658 2006) manufactured from BIS licensee manufacturer, with spacer nib (Small protruding profiles on thevertical face of a paver Mock used as a device for keeping minimum joint gap in hetween the paving blocks, as per CL. No 3.26 of 15: 15658) and of specified size and shape with aspect ratio (The ratio of length to thickness of a paver block, us per CLNo. 3.3 of IS: 15658) as per Table 2 of IS :15658 with flexural strength/breaking load as per Annexure G of 15:15658,on the prepared base course of specified CBR as per Table 1 of IRC SP 63 (2018) or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25-35 mm thick (grading of the bedding sand as per clause 6.5.1 of IRC SP- 63) and filling up the gaps in between paver blocks with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2 of IRC SP 63) and completing the edges with cut blocks as per Cl. No. 8.7 of IRC SP-63(2018) with proper confinement of bedding and joint filling sand, compaction.levelling and filling up of the edge gup. 60 mm thick.

Add GST @18%

Add CESS @1%