Development of 2 nos collateral roads Shani mandir and Sector-28 Main road under smart city project Faridabad, Haryana

Amount

Development of 2 nos collateral roads including undergrounding of electrical infrastructureShani mandir and Sector-28 Main road "SMART CITY MISSION"

Providing and fixing factory made Precast RCC cover (1700x450x100) of M-25 grade with reinforcement @8mm Dia bar @100mm c/c both sides in single layer with edge binding of MS strip have two handle for lifting all as per direction of Engineer-in-charge.Inspection chambers, Existing damaged drain covers

Pavement marking for showing symbol of CYCLE on White/ yellow/ Blue or Suitable colored as directed by engineer in charge for cycle track, at junctions with hot applied thermoplastic paints of 2.5 mm thickness including reflectorizing glass beads @ 250 gms per sqmm area as per IRC: 35. a. At 50m center to center distance (cycle symbols 1500mm X 1200mm @ cycle box). Sector-28 Main road Shani Dev road

Designing, Supply and erection of DG set of capacity given below with noise controlled.25 KVA. devices acoustic of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415 plus (-)1% volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to change over/AMF panel, making 2nd incoming cable connection from transformer,outgoing cable connection from changeover/ standard panel, making second incoming cable connection from transformer, outgoing cable connection from changeover / STD panel to incomer of motor starter panel, fenced enclosure with platform for DG sets complete as per following detailed scope and specifications and directions of Engineer-in-charge. The rating should be at 1500 RPM. Diesel Engine, Alternator, Battery 24 v.,Base Plate., Suitable sq mm suitable core copper cable upto 40 meters. Tools, standard panel, Metering set 415 VAC-1 set (Amp. meter, Volt Meter, ASS, VSS, Phase Indicator, control fuse, frequency meter, CT`s), Metering set 60/5A/11 OV (Amp. Meter, Volt Meter), Overload protection for DC-1 No. Battery Charger 24V DC, Copper bus bar of suitable size, KWH meter 96 sqmm size,Starting fuse button and key switch9on/off) ,Indicating lamps for low lubricated oil pressure, high coolant temperature, set running, load on, De control and other required accessories complete in all respects to the satisfaction of Engineer-in-charge Pump room-DG set 25KVA

Fixing of dismantled C.I. sluice valves/Non return valve (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately): Sluice Valve - 300 mm Dia. Class-1 Pump room

Providing and Fixing MS Specials As per drawing Pump room

Providing and fixing of 150mm Tail piece with one flanged end and other side Socket / spigot type Pump room

Shifting of electrical panels/box/switch boards, wires, cable or other electrical accessories required to shift from one point to another as per direction of Er. Pump room

Shifting of electrical panels/box/switch boards, wires, cable or other electrical accessories required to shift from one point to another as per direction of Er. Pump room

Providing and Fixing of Electrical MS board, CRCA sheet-power coated (2075x2500x2mm and 600mm depth) for keeping electrical panels/switches and other accessories. It includes fixing of MS board in foundation with required accessories such as Nut-Bolt/MS angle etc to keep it in fix position.Pump room

Providing and fixing fully automatic (ON and Off) water level controller and indications with specified nos of level indications in the sump well for auto operation of existing two nos 12.5 HP pumps/motors complete in all respects as per site condition. Work should be completed as per site requirement and as per direction of Er. In charge.Pump room

Shifting and Transportation of dismantled material (All types) and handing over to concern Authorities. (Including all Leads and Lifts)Pump room

Porta Cabin Pump room

Supply, Installation, Testing and commissioning of Outdoor type, 11kV SF6 type, extensible and motorized , 3 way smart Ring Main Unit (RMU) complete 1 VCB and 2 LBS and Auxiliary transformer, FPI but without FRTU as per Nigam`s technical specification Nos.. CSC-117/R- 1/DH/UH/PandD/2016-17 with latest amendments. The RMU shall have complete wiring and capability to connect /integrate the FRTU in future for enabling the SCADA functionality.

Supply, Installation, Testing and commissioning of Outdoor type, 11kV SF6 type, extensible and motorized, 3 way smart Ring Main Unit (RMU) complete 3 LBS and Auxiliary transformer, FPI but without FRTU as per Nigam`s technical specification no. CSC-117/ R-1/DH/ UH/ PandD/ 2016- 17 with latest amendments. The RMU shall have complete wiring and capability to connect /integrate the FRTU in future for enabling the SCADA functionality

630KVA, 3 phase, 11kV/433-250V oil immerse, Naturally cooled copper wound outdoor type distribution transformer as per latest Nigam technical specification with amendment relevant ISS with latest amendments. (including 1 Nos. spare)

990KVA, 3 phase, 11kV/433-250V oil immerse, Naturally cooled copper wound outdoor type distribution transformer as per latest Nigam technical specification with amendment relevant ISS with latest amendments. (including 1 Nos. spare)

Erection of Transformer on Plinth above 500KVA to 1000KVA 11/0.4 complete in all respect including placing of transformer on plinth, Earthing of Transformer- 2 Nos., Making connection to transformer.

Erection of cable box with fitting

Supply, Installation, Testing and commissioning of 6- way distribution feeder pillar with 1 Nos. ACB, 4 pole, 3 Ph, 415V, 1600A for incoming and 5 Nos. outgoing MCCB 4 pole , 3 phase, 415V, 400A rating type, metering arrangement on incomer suitable for outdoor installation, in accordance with technical specification

Supply, Installation, Testing and commissioning of 5 -way distribution feeder pillar with 1 Nos. ACB, 4 pole, 3 Ph, 415V, 1250A for incoming and 4 Nos. outgoing MCCB 4 pole , 3 phase, 415V, 400A rating type, metering arrangement on incomer suitable for outdoor installation, in accordance with technical specification

Supply, Installation, Testing and commissioning of outdoor type distribution feeder pillar with Al bus bar, IEC 60947 compliant breakers, `1 Nos.. 400A 35kA TPN MCCB, 3 Ph, 415 V` as incomer and `10 Nos. 40A 35kA TPN MCCB` as outgoing feeders, with all interconnections and in accordance with technical spec of DHBVN

Supply, Installation, Testing and commissioning of outdoor type distribution feeder pillar with Al bus bar, IEC 60947 compliant breakers, `1 Nos.. 400A 35kA TPN MCCB, 3 Ph, 415 V` as incomer and `5 Nos. 40A 35kA TPN MCCB and 15 Nos. (5 Nos./Ph) 40A 10kA SPN MCB` as outgoing feeders, with all interconnections and in accordance with technical spec of DHBVN

Supply, Installation, Testing and commissioning of outdoor type distribution feeder pillar with Al bus bar, IEC 60947 compliant breakers, `1 Nos.. 400A 35kA TPN MCCB, 3 Ph, 415 V` as incomer and `8 Nos. 40A 35kA TPN MCCB and 6 Nos. (2 Nos./Ph) 40A 10kA SPN MCB` as outgoing feeders, with all interconnections and in accordance with technical spec of DHBVN

Supply and Erection of 3C 400mm2 11 kV TR.XLPE Armored Cable (180 Mtr Labour)

Supply and Erection of 11kV TR.XLPE Armored Cable 3C 95sqmm

Supply and erection of ID Termination kit for 11kV 3/C 400mm2 cable

Supply and erection of OD Termination kit for 11kV 3/C 400mm2 cable

Supply and erection of Straight Jointing kit for 3/C 400mm2 11 kV XLPE cable

Supply and erection of HT 11kV XLPE U/G indoor heat shrinkable termination kit 3C x 95sqmm

Trenchless HDD method for laying of HDD pipe

Supply and erection of GI Flat 50x6mm

Supply and erection of GI Angel 50x50x6mm

Supply and erection of GI Channel 75x40x6mm

Supply and erection of GI Channel 100x50x6mm

Supply and erection of 11 KV G.O Switch Complete

Supply and erection of Stay Wire 7/8 swg

Supply and Erection of Stay Set 8 Feet Long

Supply and Erection of GI Nutt and Bolts off sizes

Supply and Erection of Danger Plate Enameled with clamp

Fencing of DT, RMU and LT ABC panel (including labour rate)

Supply and Erection of ACSR Cond. 80mm2 for jumper

11 KV Disk Insulator with fitting

Supply and Installation of 11 KV Polymer Pin with Insulator

D/O of PCC Pole 9 Mtr Long

Supply and Installation of PCC Pole 11 Mtr Long

Erection of GI strip 25 X 6 mm, 9 Meter For earthing

GI strip 25*6 mtr 9mtr for earthing wt. 10.80kg (TATA / SAIL make)

Earth boaring

Supplying and installation of maintenance free Earthing with all allied materials

Supplying and laying of HDPE Pipes 160mm Dia

Supply and Erection of Polycarbonate weather proof outdoor type meter cover boxes for Three phase meter sizes 445mm*345mm*170mm along with zinc plated clamps as per Nigam`s tech. specs

Supply and Erection of Polycarbonate weather proof outdoor type meter cover boxes sizes 315*265*130mm for single phase meter along with zinc plated clamps as per Nigam`s tech. specs

Installation of single phase meters in Urban area

Installation of 3 phase meters in Urban area

Supply and Erection of Aluminum Thimble

Supply and Erection of LT PVC armored 2Cx10 sqmm

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 kV grade as required.-2 X 10 sq. mm (19mm)

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 kV grade as required.-4 X 16 sq. mm (28mm)

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 kV grade as required.-4 X 25 sq. mm (28mm)

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 kV grade as required.-4CX 50 sq. mm (35 mm)

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 kV grade as required.-3.5CX 300sq. mm (70mm)

Supply and Erection of LT PVC armored 4Cx16 sqmm

Supply and Erection of LT PVC armored 4Cx25 sqmm

Supply and Erection of LT PVC armored 4Cx50 sqmm

Supply and Erection of LT PVC Unarmored 3.5 Cx300 sqmm

Supply and Erection of LT PVC Unarmored S/C 630 sqmm

Supply and erection of HT 11kV XLPE U/G outdoor heat shrinkable termination kit 3C x 95sqmm

Dismantling of single phase meters in Urban area

Dismantling of 3 phase meters in Urban area

Dismantling of LT insulator

Dismantling of Fuse box -SMC with pole clamp 30inch*18inch*8inch

Dismantling of Existing material of HT/LT network along with Distribution transformer and allied material and transportation to Nigam store-ACSR conductor (100 sqmm)

Dismantling of Existing material of HT/LT network along with Distribution transformer and allied material and transportation to Nigam store-Transformer on plinth above 200 kVA to 500 kVA 11/.4 complete in all respect

Dismantling of Existing material of HT/LT network along with Distribution transformer and allied material and transportation to Nigam store- 100 kVA to 200 kVA T/F with pole mounted substation

Dismantling of Existing material of HT/LT network along with Distribution transformer and allied material and transportation to Nigam store- 25 kVA to 63 kVA T/F with pole mounted substation.

Dismantling of Existing material of LT network and allied material and transportation to Nigam store-LT concrete poles

Dismantling of Existing material of HT/LT network along with Distribution transformer and allied material and transportation to Nigam store-HT concrete poles

Supply, installation, testing and commissioning of outdoor type Street Light Control Panel conform with IS: 2147. Floor / wall/ structure mounted, free standing, suitable for cable entry from bottom side, dust proof, vermin proof, 3 phase and neutral, bus bar aluminum, neutral bus shall be of same size as phase bus bars, Short circuit capacity for the bus bars and MCB shall be 10 kA with incomer of 100A FP MCB and outgoing of 6 Nos.16A FP MCB with Timer.

Supplying and laying of HDPE Pipes 125mm Dia

Supplying and laying of HDPE Pipes 63mm Dia

Supply, Erection and Fixing of hot dipped galvanized M.S. Overhang (48.3 X 3.25 mm) with cap (400 x 88.9 / 114.3 x 3.25 mm) over the existing poles. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure `A` attached with this BSR Double arm overhang

Supply and erection of M.S. Galvanized Octagonal pole (as per BSEN 40-3-3:2003 /BSEN 10025/IS 2062 IS: 875 Part-1 – 2015/ for MS plate for base flange) of following length and dimension as per table P-01 with base plate on the cement concrete foundation of M20 grade (1:1.5:3) as per IS 456/IS 2911. With the help of anchor bolts of grade 6.8 (IS 1367 P III). The pole shall have a weatherproof flush door and locking arrangements. Complete in all respect. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work. Octagonal MS Poles made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanized internally and externally in accordance with IS 2629. 9 Mtr.

Providing and Fixing of IK07 IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum LM6/ ADC12 material with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover (UV stabilization report submitted for UV cover) and secondary lens on each LED and should be SMD type. The System level Luminaire efficacy )=120 lm/ wt. with High Power LEDs is to be used and potted driver must be potted and has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @)=300 V AC and Auto resetting Safety ,Input Frequency 50Hz±3% Power Factor )0.95 driver Efficiency) 85%, THD (I) 70 and CCT 5700K plus 355K. Surge protection shall be min = 4 KV internal and min 10 KV external. Driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/ Name Engraved/ Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Compliance. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work. LED Street Light fixture 120 Watt

Providing and Fixing of IK07 IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum LM6/ ADC12 material with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover (UV stabilization report submitted for UV cover) and secondary lens on each LED and should be SMD type. The System level Luminaire efficacy )=120 lm/ wt. with High Power LEDs is to be used and potted driver must be potted and has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @)=300 V AC and Auto resetting Safety ,Input Frequency 50Hz±3% Power Factor )0.95 driver Efficiency) 85%, THD (I) 70 and CCT 5700K plus 355K. Surge protection shall be min = 4 KV internal and min 10 KV external. Driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/ Name Engraved/ Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Compliance. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work.LED Street Light fixture 90 Watt

Supplying and erection of 3 Core PVC copper insulated and sheathed circular flexible wire size 1.5sqmm.

Bidder Name

Amount

Naresh Agarwal Constructions Pvt. Ltd.(GSTN-NA)--1080637

PCI INFRAPROJECTS PRIVATE LIMITED(GSTN-NA)--1083044

PCI INFRAPROJECTS PRIVATE LIMITED

PCI INFRAPROJECTS PRIVATE LIMITED