8109 CERTAIN REPAIRS AT INS TRATA WORLI AND OTHER AREAS UNDER AGE BR II UNDER GE NW KUNJALI

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc complete all as specified and as directed.

S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling complete all as specified and as directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured)ceiling board / tiles deep panel complete all as specified and as directed.

M&L for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old un serviceable false ceiling, complete all as specified and as directed.

Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws in high rise blds etc complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings,chequred plates etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walkj ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified and as directed.

M & L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS -1161 1979 grade St-240 complete all as specified and as directed.

Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete all as specified and directed.

M &L for machine cut kota stone slab flooring 18 to 20 mm thick as in steps, landings, floors etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,mirror polishing incl making 02 Nos grooves in steps over & incl 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc including removing the old tiles complete all as specified and as directed.

Material and Labour for machine pressed cheqered cement coloured tiles of size 300mmx300mmx20mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointedin neat cement slurry in floors complete all as specified and directed .

Grinding and polishing existing floor of any type (Kota stone,mosaic,cuddappa stone etc) complete all as specified and as directed.

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs etc complete all as specified and as directed.

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water on plastered surfaces, complete all as specified and as directed.

M & L preparation of plastered surfaces and applying two coats of smart Care Damp block 2K or equivalent acrylic polymer modified cementious high performance coating including smart care crack seal coat complete all asspecified and directed

S&F in repairs for stainless steel letter size 450 mm height and 32 mm depth made of 1mm thick Stainless steel sheet with seamless welding rubbed, polished and edges smooth with necessary fixing devices complete all as specified and as directed.

S&F in repairs for stainless steel letter size 225 mm height and 32 mm depth made of 1mm thick Stainless steel sheet with seamless welding rubbed, polished and edges smooth with necessary fixing devices complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and rubbishing off the premises etc complete all as specified and as directed..

M&L rendering 15mm thick in CM 1:6 on brick surfaces, finished even and smooth without using extra cement on walls to plastering complete all as specified and as directed.

M&L rendering 10mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and as directed..

M & L rendering 20mm thick in two coats(15mm inner coat 5mm finishing coat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound on finishing coat in the proportion as mentioned in manufacturer's instructions including complete all as specified and directed. (Note: Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified and as directed.

M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth complete all as specified and as directed.

M &L for applying two coats of oil emulsion distemper over newly plastered/ putty surfaces of wall complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weeather acrylic base paint (100 % acrylic) over one coat of cement based primer complete all as specified and as directed.

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scaffolding complete all as specified & directed.

M&L for preparation of old decorated surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and directed

Removing of bldg materials exc 5 KM but not exc15.00 KM and depositing where direted complete all as specified & directed.

S&F in repair powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, sliding windows/ partion/Ventilator etc including fixing and making the frames for hinges glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement,in sliding shutter, sealant etc complete all as specified & directed.

S&F in repair aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 102, 7.5 mm thick complete all as specified & directed.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified & directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each complete all as specified & directed.

Taking down shutters of any description not exc 1 sqm each complete all as specified & directed.

S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified & directed.

S&F 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated complete all as specified & directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified & directed.

S&F 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood.

M&L for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces complete all as specified & directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc.complete all as specified & directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc.complete all as specified & directed.

S&F 12mm thick prelaminated medium density particle board,interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified & directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified & directed. .

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified & directed. .

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified & directed.

S&F Stainless steel butt hinges 100 mm complete all as specified & directed. .

S&F 75 mm Stainless steel butt hinges and fixed complete all as specified & directed. .

M & L for MS flat for hold fast. Conforming to Fe-290-0 or Fe-165 complete all as specified & directed.

S&F in repairs 140 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified & directed.

S & F Aluminium extruded body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not morethan 35 kg and fixed complete all as specified & directed.

M&L for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint including external window with necessary scaffolding complete all as specified & directed. .

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

S & F in repairs steel rolling shutters, without ball bearing, as specified including top cover , anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type 1 mm thickness of laths and applying two coat of syntetic enamel paint over a coat of redoxide primer complete all as specified & directed.

S & F in repairs motorised steel rolling shutters, as specified including top cover , anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete but gear operated type with bevel gear box and crank handle 1.25 mm thickness of laths and applying two coat of syntetic enamel paint over a coat of redoxide primer complete all as specified & directed.

S & F in repairs 14 HP single phase for motorised shutters including all accessories all as specified and directed

S F in repairs safety lever locks mild steel with 4 levers for rolling shutters complete all as specified & directed.

S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) fixed in repairs complete all as specified & directed.

S&F in repairs water closet squattin pan (Orissa pattern) 580 x 440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe) complete all as specified & directed.

S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified & directed.

Supply only cast iron 'P' trap 100mm dia complete all as specified & directed.

S/F in repairs PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets complete all as specified & directed.

S&F in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern complete all as specified & directed.

S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed.

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified & directed.

S&F stainless steel sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm and bowl size 410 x 330 x 160mm fixed in repair complete all as specified & directed.

S&F in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed complete all as specified & directed.

S&F in repairs fancy type angle valve chromium plated cast copper alloy 15mm bore with crutch or butter fly handle complete all as specified & directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified & directed.

S&F in repairs Soap dish any type fixed to plugs with chromium plated brass screws complete all as specified & directed. .

S&F vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified & directed.

Dismantling water tank of capacity exc. 500 Ltrs but n.exc. 1000 ltrs complete all as specified & directed. .

Dismantling water tank of capacity exc. 1000 Ltrs but n.exc. 2000 ltrs complete all as specified & directed. .

S&F rotational moulded polythylene water storage tank of 1000 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.

All as per item No. 91 but for 2000 Ltr complete all as specified & directed. .

M&L for vitreous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, fixed in repairs complete all as specified and directed.

S&F 2mm thick Linoleum ,plain coloured laid in floors incliding streching, cutting , fitting incl seales down with an approved adhesive complete all as specified and directed.

S & F 16 mm thick perforated particle board/ tiles for insulation and accoustic purpose, 60X60 cm in size, fixed with nails to timber frame work or with staples on snap grid for wall all as directed complete all as specified and directed.

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified and directed.

S&F in repairs Corner glass shelf with brackets complete all as specified and directed. .

S&F in repairs aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges complete all as specified and directed.

S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed. (Make: Cat log No FUS-29001 of Jaquar or equivalent makes mentioned in list of manufcatures).

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 (40 mm graded stone agg) as in sub base complete all as specified and directed.

M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate ) as in plinth protection and similar works 75mm thick finished fair and smooth without using extra cement complete all as specified and directed. .

M & L ready mix Concrete of M-30 as in basement floors including finishing the surfaces even and smooth withour using extra complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.06 Sqm but n exc 0.09 Sqm in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Note : colour and size of tile shall be approved by GE from latest catalogue

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. . Note : colour and size of tile shall be approved by GE from latest catalogue

M&L for coloured glazed ceramic tiles 450x300x7 mm thick but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:3 complete all as specified and directed. Note : colour and size of tile shall be approved by GE from latest catalogue

M&L light shadedouble charged virified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Note : colour and size of tile shall be approved by GE from latest catalogue

M&L light shade double charged vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm (600x600mm),but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM1:3 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Note : colour and size of tile shall be approved by GE from latest catalogue

M & L 20 mm bore curtain rod stainless steel with brakets, stops, rollers etc complete all as specified and directed.

S & F SS grating suitable for 100/75 mm bore complete all as specified and directed.

Laxmi Sales (BID ID -3061809)

A.R. ENTERPRISE (BID ID -3061162)

MADHU ENTERPRIZES (BID ID -3061314)

H R Enterprises (BID ID -3063801)

SAHI SAGAR ENTERPRISES (BID ID -3071898)

SHREE JAGDISH FURNITURE CO. (BID ID -3060971)