ADDN/ALTN AND SPECIAL REPAIR OF MARRIED ACCOMMODATION AT KAMPTEE UNDER GE KAMPTEE

Amount

Dismantling of asbestos cement sheet (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed.

Dismantling of Single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Material and labour for 0.50 mm thick pre-painted galvalume aluminium zinc coating G.I. based corrugated steel sheet (AZ150) of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw/J-type bolt/L-type bolt complete all as per manufacturer instructions.

Material and labour for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (AZ150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J-type bolt/L-type bolt complete all as specified and as directed.

Dismantling Battens for tiles, shingles etc, of any size including tilting fillets Spaced exceeding 15 cm complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.

Dismantling of timber fillets, rails, posts, rafters, purlins under 40 Sq cm in section complete all as specified and directed.

Supply and fix mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc complete all as specified and directed.

All as in item No. 09 herein before but erection and re-fixing only, complete all as specified and directed

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets, complete all as specified and directed.

Material and labour for 4mm thick Non Asbestos, fiber cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 32mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar beading (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.

Material and labour for coloured non skid ceramic premium quality tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

Material and labour for coloured non skid ceramic premium quality tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

All as in item No. 15.00 here-in- before but as in skirting with and including 10mm backing in cement mortar 1:4 complete all as specified and as directed.

Material and labour for glazed ceramic coloured premium quality tiles 300mm x 450mm, on vertical surface such as skirting/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in Cement Mortar 1:3 finished even and fair complete all as specified and as directed.

Taking down existing water proofing treatment including Plain Cement Concrete padding, mortar etc and disposal of rubbish outside of MD land (5 km) and hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for provision of water proofing treatment by using APP torch on non woven polyester film reinforcement with 3 mm thick and weight not less than 3.00 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick cement plaster in CM 1:4 with and including WPC and two coat of aluminum paint of 0.2 Kg/Sqm (each coat) over membrane complete all as specified and directed. Note:- Work to be executed through authorized applicator only.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Excavation in trenches not exceeding 1.5m in depth and 1.5m in width and getting out in hard /dense soil complete all as specified and directed.

Material and labour for form work to side of concrete in foundation, footing base, base of columns, side and soffits of plinth beam and similar work complete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete 1:1 1/2:3 type A-1 (nominal mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200 mm thick (Horizontal or sloping) rough finished surfaces of concrete flat complete all as specified and directed.

Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and directed.

Material and labour for reinforced cement concrete 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for form work to side of columns and similar work complete all as specified and directed.

Material and labour for providing reinforced rement concrete 1:1 1/2:3 type A-1 (nominal mix) as in columns and pillars etc complete all as specified and directed.

Material and labour for form work to side of sides and soffits of floor or roof beams, beam hunching, girders, bressummers, lintels, and similar work complete all as specified and directed.

Material and labour for providing reinforced cement concrete 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

Material and labour for form work to chullah hoods, chajjas, troughs and similar items including edges and similar work complete all as specified and directed.

Material and labour for providing reinforced cement concrete 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in chajja etc complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

Material and labour for mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

Material and labour for providing precast cement concrete Type B1 1:2:4 (using 20mm graded stone aggregate) set in CM 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water roughs, mangers , shelves and similar articles with plain faces, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded & pointed in any mortar complete all as specified and directed.

Material and labour for pre-polished Machine cut kota stone slab flooring 20-25 mm thick over and including cement screed base 20mm thick in CM 1:4 laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete, complete all as specified and directed.

Material and labour for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry @ 2 Kg per SQM, mixed with pigment to match the shade of the slab incl rubbing and polishing, laid over and including 10mm thick screed in cement mortar 1:4, complete all as specified and directed

Supply and fix pre-polished granite 20mm thick fixed on platform/ shelves/ steps/ cills over and including 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as specified and directed

Material and labour for machine cut cudappah stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolitions of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for providing cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in foundation, mass concrete and filings complete all as specified and directed.

Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 ( using 40 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection including mass filling in complete all as specified and directed.

Material and labour for 100 mm thick plain cement concrete type B1, (1:2:4) (using 20mm graded stone aggregate) as in floor/ hard standing, etc finished surface even and smooth without using extra cement, complete all as specified and directed.

Material and labour for pre-polished chequered tiles rubber pressed glossy finish (any colour) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.

Material and labour for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 47.00 here-in-before but half brick wall in CM 1:4 complete all as specified and as directed.

Material and labour for cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed.

Supply and fix wire netting of galvanised steel wire 0.71 mm dia and size of mesh is 12mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam, chajja, facis, slab, lintel etc including taking down plaster of cracked portion and making good the area by rendering in CM 1:3 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed.

Material and labour for rendering 15 mm thick on brick or concrete surfaces in CM 1:4 using water proofing liquid compound as per manufacturer instructions, and finished fair and even complete all specified and directed. Note: WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed.

Material and labour for rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling surfaces finished even and smooth (without using extra cement ) complete all as specified and directed.

Material and labour for rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even and smooth including making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note : Rate for form work incl in the rate quoted by the contractor.

Material and Labour for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation of surfaces complete all as specified and directed Note:- Painting to be executed by mechanical means through authorized applicator of approved make.

Material and labour for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer, over a coat of wall care putty complete all as specified and directed. Note:- Painting to be executed by mechanical means through authorized applicator of approved make.

Material and labour for complete removal of Existing Treatment and applying two coats of oil bound distemper over a coat of cement Primer and wall care putty complete all as specified and directed. Note:- Scrapping and painting to be executed by mechanical means through authorized applicator of approved make.

Material and labour for preparation of old plastered surfaces of wall and applying two coats of white wash complete all as specified and directed

Material and labour for applying three coats of white wash on undecorated ceiling surfaces complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame) area n. exc 1.50 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

Supply and fix ( factory made) pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed.

Supply and fix ( factory made) pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed.

Material and labour for Plain Cement Concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed.

Supply and fix 30 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

Supply and fixing 30mm thick second class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fixing second class hard wood 35mm thick factory made Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix aluminum (colour powder coated) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodized aluminum snap beading and connected locking arrangement complete all as specified and as directed Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminum alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint Make of Aluminium Sections powder coated : Jindal or techno commercially equivalent in specified makes.

Supply and fix colour powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fix colour powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). Hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed.

Supply and fix 4 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.50 square metre in each pane complete all as specified and as directed.

Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Supply and fix framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

Supply and fix solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, in opening complete as per specified and as directed.

Supply and fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply and fix 100 mm long stainless steel butt hinges and fixed with screw/welded to frames etc complete all as specified and as directed. Note: Sample and design as approved by GE.

Supply and fixing 150mm stainless steel barrel tower bolts, fixed complete all as specified and as directed. Note: Sample and design as approved by GE.

Supply and fixing 125 mm stainless steel pressed handles, fixed complete all as specified and as directed. Note: Sample and design as approved by GE.

Supply and fixing 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

Material and labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for complete removal of existing treatment of old wooden surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, scrapping and painting to be execute by mechanical means through authorized applicator of approved make complete all as specified and directed.

Material and labour for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide on new surfaces in any tint complete all as specified and as directed.

Material and labour for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth in cement mortar 1:3 complete all as specified and as directed.

Supply and fix in repair GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and as directed.

Supply and fix in repair GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection and complete all as specified

Supply and fix in repairs vitreous china white squatting pan "Orissa Pattern" size 580x440mm, with integrated foot rest (excluding flushing cistern, flush pipe etc) including making good to floor complete, all as specified and directed.

Supply and fix in repair Vitreous China wash basin, white, with pedestal flat back, size 540x400mm excluding ditto but including brackets and pedestal etc all as specified and directed.

Supply and fix in repairs 10 litre capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified. Make : Prayag Cat No 501 or techno commercially equivalent in Jaquar/Hindware

Supply and fix in repair bib tap 15 mm dia cast copper alloy with crutch or butter fly handle screwed for iron pipe or for brass ferrule and fixed complete all as specified.

Supply and fix in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, fancy type screwed for iron pipe and fixed, complete all as specified and as directed.

Supply and fix in repair wall mixer, 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange including showers both hand and over head, complete all as specified and directed. Make:- Jaquar cat part No FUS-29281 or techno commercially equivalent.

Supply and fix in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut complete all as specified and directed.

Supply and fix in repairs stop valve/angle cock 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwed for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and directed.

Supply and fix in repairs 25mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed

Supply and fix fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.

Supply and fix mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fix hat pegs, solid body, cast iron or mild steel 125mm to 175 mm anodized complete all as specified and directed.

Material and labour for cutting holes into or through brick walls nexc 150 cm area built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

Supply and fix in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

Supply and fix in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Supply and fix in repair sinks with drainage board made of stainless steel thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm incl waste pipe 32mm dia complete all as specified and directed.

Supply and fix as in repair stainless steel kitchen plate rack of size 80x55x20 cm of minimum thickness 0.8mm including necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and directed. Make : Nirali/Prayag or equivalent in specified makes

Supply and fix waste fitting, 32 mm/40mm brass, chromium plated for sink, basin, etc with long screwed shank and fly nut compete all as specified and directed.

Supply and fix in repairs 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

Material and labour for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent complete all as specified and directed.

Supply and fix in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.

Supply and fix in repair chromium plated grating doom with/without waste hole of size 110/125mm dia complete all as specified and directed complete all as specified and directed.

Supply and fix in repair 75 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.

Dismantling water tank of capacity exc 250 litres & not exceeding 500 ltrs and removing to store of any description complete all as specified and directed

Supply and fix 500 litre capacity rotational moulded three layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed.

Disconnecting existing tanks of capacity exc 250 & not exc 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all the scale and dirt, etc from tank and from months of circulating pipes etc and writing the date as like "CLEANED ON 10 DEC 2023" white or black/White thick synthetic enamel paint complete all as specified and directed

Supply and fix built in steel cupboard shutter made out mild steel, plain back sheet 1 mm thick as in shutter and 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete with hinges, fasteners, locking system, 3 lever lock and CP handle, incl 2 coats of synthetic enamel paint over a coat of red oxide primer with spray machine complete all as shown on drawing complete all as specified and directed

Dismantling boarding, any description, fixed in any position with screw, complete all as specified and directed.

Supply and fixing 18 mm thick UV High gloss MDF board duly edge banded with 0.8 mm thick PVC taping fitting of shutters shall be done with auto closing hydraulic hinges and modular handles, design and colour as approved by GE suitable for kitchen cabinet etc complete all as specified and directed Make : Action tesa/ Kitply/ Archidlam Note : - hinges, handles and locked shall be measured and paid separately under relevant items here-in before.

Taking down existing cabinets and supply and fixing kitchen cabinet made of HD HMR board 18 mm thick water proof with life time warranty for anti-termite. Cabinets shall be duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves complete all as specified and directed Make : Action tesa/ Kitply/ Archidlan

Supply and fix stainless steel auto closing hydraulic hinges fixed with self-tapping screw as in position required and complete all as specified and directed Make: Godrej or technocommercially equivalent in specified makes.

Supply and fix stainless steel modular handle 4 inch fixed with self-tapping screw as in position required and complete all as specified and directed. Make: Godrej or techno commercially equivalen tin specified makes

Supply and fix in repair 18 mm thick designer Alstone or equivalent wood Polymer Composite Board ( WPC) in cupboard shutter and like with decorative on both side design fixed by drilling screws and brackets all as specified and all as directed.

Supply and fix magnetic catcher of size 20mmx50mm suitable for cup board shutter complete all as specified and as directed.

Material and labour gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

Supply and fix in repairs soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and fix 250mm stainless steel, sliding door bolt with hasp,stable (bolt type) and fixing clips of sheet, cast or extruded and fixing bolts and sliding bolts of extruded section and fixed complete all as specified and directed.

Supply and fix in repairs cabinet mirror 400x 500 mm for bathrooms complete all as specified and directed. Make : Prayag Cat Part No 551 or techno commercially equivalent in specified makes

Supply and fix in repair corner sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make: Prayag cat No BEA 44 or techno commercially equivalent in specified makes.

Supply and fix 100mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Supply and fix second class hard-wood, small fittings such as bracket of any sizes, hinge blocks, cleats, door/window stoppers and like articles not exceeding 200 cubic centimeters each complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4, Type B-0 (using 12.5 mm graded stone aggregate) 25 mm thick as in sunken floor complete all as specified and directed.

Material and labour for PCC type E-2 1:5:10 (using 40 mm graded stone aggreate) in foundation, filling and mass concrete complete all as specified and directed

Material and labour for Post Construction Anti Termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, etc complete all as specified and directed.

Material and labour for Anti Termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed.

Material and labour for Grouting in Brick/RCC/ wall/floor/roof through PVC nipples at a spacing of 45 to 60 cm C/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizer admixture like FOSROC (model CEBEX100) or PIDILITE (MODEL 207 PIDICRET 8AM) @ 225GMS/50kGS of cement to fill up all capillaries/voids/honeycombing, nozzles to be sealed with sealing with pressure of 2 to 4 kg/sq cm and continued till refusal. After instructions complete all as specified and directed. Note:- After ascertaining the location of leakage/seepage/dampness under relevant item shall be operated of the required location.

Supply and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K Supremo or approved equivalent, having 80% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTM C 1202, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. Applying Smart Care Damp Block 2K Suprema in two coat 2 kg/sqmt consumption, The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc, complete as per manufacturers specifications and as directed.

Material and labour for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in in surface channel and drains complete all as specified and directed.

Extra for forming fair finished drain or channel of manholes inner girth not exceeding 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc complete all as specified and as directed.

Supply and fix hard drawn steel wire fabric wt n exc 4 Kg/Sqm cut to length, bent to shape required and tying with and incl mild steel wire (annealed ) not less than 0.9 mm in dia complete all as specified and as directed.

Supply and fix 75 mm long stainless steel butt hinges medium weight complete all as specified and directed.

Material and labour for applying one coat of epoxy resin (FAIR BOND EP) on old concrete/brick surfaces @ 0.30Kg/Sqm including preparation of surfaces as per manufacturer's instructions and applying 25mm thick (average thickness) of cement and sand (fine grit) in ratio 1:4 mixed with chloride free spray concrete plasticizer (spray crete) as per manufacturer's instruction with guniting machine of pressure capacity not less than 5 Kg per Sqm and finished the surface even and smooth in CM 1:4 complete all as specified and directed for buildings not more than triple storeyed. Make : Fairmate chemicals or equivalent make of Pidilite/Fosroc.

Making good under cills (or over arches, lintels and bressummers) including all pining as necessary in cement mortar (1:4) complete all as specified and directed

Cutting opening through walls for door, window and other openings or enlarging existing opening etc or cutting out defective masonry for under pining including providing fixing and removing shoring cleaning and stacking stone and removing surplus to store and rubbish off the premises built in cement mortar complete all as specified and directed

Material and labour for Reinforced concrete pipes 150mm dia, class NP2, laid & jointed complete with collars complete all as specified and directed

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to distance n.exc 50m and making good surface in hard/dense soil complete all as specified and directed .

Material and labour for cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed .

Material and labour for cement concrete type B-0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and threading complete all as specified and directed.

Removing building materials etc. (other than soil to a distance of 5KM , beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

Material and labour for preparing surfaces of wood and wood based materials ,new or old, of any description and girth, not otherwise described and treated with creosote, complete all as specified and directed.

Supply and fix stack clamps made out of 25mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe complete all as specified and directed.

Material and labour stack clamps out of 50mm by 5mm flat iron and 10mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof for 75mm pipe complete all as specified and directed.

Material and labour for welding to existing steel door/gate, window in repairs not exceeding 2.5 cm in length thickness of metal exceeding 6mm but not exceeding 9mm complete all as specified and directed.

Material and labour for Welding to existing steel window in repairs exceeding 2.5 cm in length but not exceeding 5 cm in length thicknes of metal exceeding 6mm but not exceeding 9mm, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Supply and fix for 7 feet pulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.8 mm, pulley made up of delrin with rope guide mounted or channel pair of length 24 feet ( distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self tapping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed and Minimum weight of one pipe shall not be less than 7700 Gms/unit (for 04 pipes). Make : Easy dry or techno commercially equivalent in specified makes

INTERNAL ELECTRIFICATION

Taking down copper/aluminium point wiring (light, fan, socket or power & bell) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including wooden battens /casing /capping and conduit etc and making good disturbed surfaces of walls, floors, ceilings etc. complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces.

Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multi stranded copper conductor 2x1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch complete all as specified and as directed. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

Material and labour for one light point controlled by two 2 way switches, with cables 2x1.5 +1.5 sq. mm size complete all as specified and directed.

Material and labour for ceiling/Exhaust fan point controlled by one switch and regulator with cables 1.5 sqmm size complete all as specified and directed.

Material and labour for one 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sqmm size complete all as specified and directed.

Material and labour for One 3 pin socket outlet, 5 amps, independent board, with cables 2x2.50 + 1 x 2.50 sqmm size multistranded unsheathed FRLSH copper conductor complete all as specified and directed

Material and labour for One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 2x2.50 + 1 x 2.50 sq.mm size multistranded unsheathed FRLSH copper conductor complete all as specified and directed.

All as per item Sl No 159.00 here -in- before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 16 amps power point complete all as specified and directed.

Material and labour for for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 25 mm medium grade concealed in wall of the following size 2x6.0 Sqmm with earth wire of 1x6.0 Sqmm complete all as specified and directed. Make : Wire:- Finolex, Polycab, Havells, KEI . PVC Conduit :- Superplast, Polycab, Panasonic Anchor, Modi, Precision, Astral. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

Supply and fix ceiling rose surface type 2/3 terminal 5 amps complete all as specified and directed.

Supply and fix bell ding dong, AC 230 volts, single phase complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

Supply and fix modular switch one way 6A, 1 module complete all as specified and directed. Make : Legrand, Havells, Crabtree, Indoasian or all as per specified in makes

Supply and fix Modular switch 2 way 6A, 1 module complete all as specified and directed. Make : Legrand, Havells, Crabtree, Indoasian or all as per specified in makes

Supply and fix Modular switch one way 16A, 1 module complete all as specified and directed. Make : Legrand, Havells, Crabtree, Indoasian

Supply and fix Modular bell push 6A, 1 module complete all as specified and directed. Make : Legrand, Havells, Crabtree, Indoasian or all as per specified in makes

Supply and fix Modular Socket 6A ,3 pin combined 2 module complete all as specified and directed. Make : Legrand, Havells, Crabtree, Indoasian or all as per specified in makes

Supply & fix Modular Socket 6A/ 16A, 3 pin combined 2 module multipurpose type complete all as specified and directed.

Supply and fix Modular Fan step regulator, 120 watt 2 module complete all as specified and directed. Make : Legrand, Havells, Crabtree, Indoasian or all as per specified in makes

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Philips ( Cat No BN021CLED22S PSU CW GR) or techno commercially equivalent in /Havells/Jaquar or all as per specified in makes

Supply and fix rechareable LED emergency inverter bulb (cool white ) 9W, 240Volt Lumen efficiency 100 lumen per watt complete all as specified and directed. Make : Philips or techno commercially equivalent in /Havells/Jaquar or all as per specified in makes

Removing existing serviceable LED lights fittings and re-fixing the same as directed complete with connection from ceiling rose and making functional complete all as specified and directed.

Supply and fixing LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Jaquar(CAT NO. LBLK02X010XC) or techno commercially equivalent in /Havells/Jaquar or all as per specified in makes

Supply and fix LED baton fitting 2' length including drivers having energy consumption, 10/11W, 230 V, 50Hz, 6500K, not less than 100 lumen prewired, complete all as specified and as directed Make : Philips or techno commercially equivalent in /Havells/Jaquar or all as per specified in makes

Supply and fix building security light LED 25 W with Lumen O/P 100 with driver with rated voltage 240 V, 50Hz, including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc complete all as specified and as directed Make : Bajaj ( Cat No BRLEP 25W LED) or techno commercially equivalent in /Havells/Jaquar or all as per specified in makes

Removing existing serviceable LED building security lights fittings and refixing the same as directed complete with connection from ceiling rose and making functional complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. 5 star rated with brushless direct current motor (BLDC) complete all as specified and as directed. Make : Crompton/Usha/Havells/Bajaj or techno commercially equivalent in or all as per specified in makes

Taking down old unserviceable ceiling fan, ceiling cable end, dismantling blades and removing fan and blades to MES store complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase 230V of size 300m sweep with, three blades and frame and louvers shutter complete all as specified and directed. Make : Usha/Bajaj/crompton/Havells

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of 250mm sweep four blades complete all as specified and directed. Make : Usha/Bajaj/crompton/Havells

Material and labour for making of suitable size of hole for 250 to 300 mm sweep exhaust fan and including grouting bolts, cutting chasing and plastering, white washing etc and match with existing surface, complete all as specified and as directed.

Material and labour for down rod for ceiling fan of any make and sweep made out of medium grade GI tubing 15mm dia duly painted with two coat of enamel paint and provision of holes for electric wire at top and bottom also arrangement for fitment of ceiling fans complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. Make : Racold/Havells/Jaquar

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 12 way with 200 Amp rated bus bar flush /surface mounting double door including taking down old enclosure complete all as specified. Make : Legrand/Havells/ABB or all as per specified in makes

Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door including taking down old enclosure omplete all as directed. Make : Legrand/Havells/ABB or all as per specified in makes

Supply and fix sheet metal enclosure vertical triple pole & neutral (VTPN) with MCCB 100 amps 16 KA breaking capacity for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door including taking down old enclosure complete all as specified and as directed Make : Legrand/Havells/ABB or all as per specified in makes

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series ccomplete all as specified and as directed Make : Legrand/Havells/ABB or all as per specified in makes

Supply and fix MCB single pole and neutral 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series, complete all as specified and as directed. Make : Legrand/Havells/ABB or all as per specified in makes

Supply and fix MCB triple pole and neutral 415 volt 40 to 63 amps 10 KA complete all as specified and as directed . Make : Legrand/Havells/ABB or all as per specified in makes

Material and labour for earthing complete with galvanized iron or steel earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the Material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 type B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

Taking down energy meter after disconnecting electrical connections and refixing the same and making all necessary connections complete all as specified and directed.

EXTERNAL ELECTRIFICATION

Excavation in trenches for laying of cable trench, pole and stay foundation in any type of soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out complete all as specified and directed.

Returning filling in,including spreading,leveling watering and well ramming in layers not exceeding 25 cms thick complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 Mtr & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Supply and fix Double wall corrugated High Density Polymer Ethyl(HDPE) pipe for laying of electric cable of size 50 mm outer diameter and 38 mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches(Including cutting of roads or any others hard surfaces and making good disturbed surfaces) , wall, poles including bends, sockets and other connected accessories complete all as specified and directed. Make : Ketron/tirupati or equivalent in specified makes. Note :- Pipe shall be with ISI marked

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, with ISI mark electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq mm, 4 core including testing after laid and jointed all as specified and as directed

Note : The amount against Schedule of Credit on Page No. 59 (R) shall be deducted from the total amount quoted against Sch 'A' while deriving lum Sum for Acceptance.

VEENUS ENGINEERS

M/s Dara Constructions, Pulgaon

M/s Shrangi Rishi Construction

JYOTI ENTERPRISES

M/s T.S.JOHAR

NIHAL ENTERPRISES

Tiki Water proofing Co