INTERNAL / EXTERNAL PAINTING TO WALL, CEILING, DOOR, WINDOW ETC INCLUDING PETTY REPAIR OF PLASTERING ON WALL / CEILING, FACIA OF CHAJJAS TO JCOS/ ORS/ MD ACCN UNDER AGE B/R-II AT NEW CANTT PRAYAGRAJ.

Amount

Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Cutting holes not exceeding 100 sqcm into or through cement concrete slabs chajjas,etc reinforced if reinforcement is cutting through complete all as specified and directed

M&L for Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in Chajjas , landing, balconies, canopies, desk slab and in shelves etc complete all as specified and directed.

Use and waste for form work to chhajjas , racks stabs, lintel or similar work for fair finished surfaces, horizontal etc complete all as specified and directed

S & F mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends land binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips complete all as specified directed

All as per item No 5 above but 6 to 8mm dia.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in kerbs or rounded or chamfered on edge and throating complete all as specified directed.

S&F 2 mm dia galvanised steel wire mesh of size 150 x 100 mm made up into mattresses or cages, lapped, wired & fixed in position and tightened with galvanised binding wire to existing reinforcement of RCC Chajja, slab etc after removing of the loose particle of aggregate, plaster etc complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for rendering 5mm thick in CM 1:3 finished even and fair with out using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, concrete surfaces with WPC (liquid form) finished even and fair without using extra cement complete all as specified and directed

Supply only integral water proofing compound complete all as specified and directed

M&L for preparing of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of wall complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coats of white wash on old surface of wall complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of ceiling complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of oil bound distemper on old surface of wall complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coats of oil bound distemper on old surface of wall complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 1 to 2 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying two coats of oil emulsion distemper over a coat chalk whiting of approved shade complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetation's by scrapping machine tool/electric hand grinder and making the surface even and smooth by applying one coat of cement base paint white or tinted by mechanical paint sprayers complete all as specified and directed

M&L for Complete removal of existing treatment of wall and applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 1 to 2 mm uniform thickness making surface absolutely smooth by grinding with sand paper & applying two coats of Plastic Emulsion Paint white or tinted over one coat of primer complete all as specified and directed .Note: Scraping of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer. Note: Scraping of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and applying one coat of plastic emulsion paint complete all as specified and directed

M&L for preparing old plastered decorated surfaces of wall and applying one coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note: sanding of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.

M&L for complete removal of existing finishes of wall including cornices etc and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note: Scraping of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.

M&L for preparation of old painted surface of wood and wood based materials by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed

M&L for preparation of old painted surface of wood and wood based materials by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any description, not otherwise described, over 10cm in width or girth and applying two coat of synthetic enamel paint, white or tinted complete all as specified and directed.

M&L for preparation of old painted surface of steel and iron by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

M&L for preparation of old painted surface of steel and iron by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any description, not otherwise described, over 10cm in width or girth and applying two coat of synthetic enamel paint, white or tinted complete all as specified and directed.

M&L for writing letters or figures (block. roman, Italic or Indian) not exceeding 30cm height complete all as specified and directed .

M&L for preparation of old painted brick or concrete surfaces of any description, not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed.

M&L water proofing treatment of walls of bathroom consisting of following operation complete all as specified and directed.:- (i) Cleaning of surfaces by wire brushing brooming removing dust particles. (ii) Filling of all brick joints with cement mortar 1:4 complete. (iii) Applying a coat of Chemical Dr fixit pidilite fin 2K or any other make as mentioned in P.S & as approved by Engr-in-charge & entire satisfaction complete (iv) Applying fibre mesh setting with chemical Dr Fixit pidicrete URP or other approved make complete. (v) After the surface dried, 15 mm thick plaster in CM 1:4 even & fair finish complete under entire satisfaction of Engineer-in-charge. Note:- All water proofing work will be executed under the supervision of the authorised representative of DR Fixit or any other approved agency by GE.

M&L uprooting of plants/ trees growth on wall/ drains/ roof surfaces etc in a skilled and careful manner using appropriate tools and means and without causing any damage to the adjoining part. The exposed surfaces of wall will be coated with a paste made from ammonium sulphate crystals or with tree killer chemical available in the market. In this condition the root system to be left to absorb and die. Note:- The rate for making good the existing wall surfaces damaged during the uprooting of the tree is deemed to be included in the rate quoted by the contractor.

Schedule of Credit (MINUS) Rs. 2,175.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum

P S TRADERS

M/S CHANDRIKA PRASAD AND SONS

Channa Brothers and Co.

SHIV SHANKAR MISHRA

Shivagya Engineering