Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 LAccepted-AOC 131 2 DEBINIBASH ROAD LP 61 10 1 DUM DUM KOLKATA WEST BENGAL 700028 | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹3.4 L+₹1.6 L (85.9%)Rejected-Finance 726 ANANAPUR KOLKATA 700107 | KOLKATA | KOLKATA | WEST BENGAL | 700107 | L2 | Rejected-Finance quoted higher than L1. | |
| 3 | L3₹3.5 L+₹1.6 L (89.0%)Rejected-Finance KB 26 CHARNOCK CITY SALT LAKE CITY SECTOR III NORTH 24 PARGANAS WEST BENGAL 700098 | 24 PARAGANAS NORTH | WEST BENGAL | 700098 | L3 | Rejected-Finance quoted higher than L1. | |
| 4 | L4₹3.5 L+₹1.7 L (92.9%)Rejected-Finance 93 SARAT CHATTERJEE ROAD SHIBPUR HOWRAH 711102 | HOWRAH | HOWRAH | WEST BENGAL | 711102 | L4 | Rejected-Finance quoted higher than L1. |
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
27 Mar 2024, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
University Engineer, C.U.
Office of the University Engineer Darbhanga Building, 87/1 College Street Kolkata- 700073, University of Calcutta.
Supplying, installation and commissioning of lab tables for Room no - 742 for Biochemistry Dept. under University of Calcutta for FY - 23-24.
2024_CU_684039_1
E-tender/Eng/CQ- 670/23-24
Open Tender
Miscellaneous Goods
Item Rate
45 days
BALLYGUNGE SCIENCE COLLEGE CAMPUS, C.U.
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹10,000
Yes
11 Nov 2024
12 Mar 2024
1 Apr 2024
12 Mar 2024
27 Mar 2024
12 Mar 2024
Amount
Wall Laboratory table: 2700 mm L x 900 mm D x 900 mm H Storage Based Island Bench with Shutter Drawer under -storage, Electrical Truncking Reagent shelf above the table top.The under structure should be made of CRCA MS with pure epoxy powder coating and are of 1mm thickness. The master upright should be of the dimensions: 300 x 150 x 1.2 mm. It should be made from 1.2mm thick CRCA MS with pure epoxy powder coating.It should have an open-able door for easy service maintenance and should extend till the false ceiling. The vertical upright should form the backbone for internal distribution of GDS, electrical supply systems shelves and top units and should be constructed from 16-gauge CRCA formed steel panels with removable covers. Shelf height should be adjustable with an increment of 1inch / 25mm. Uprights should be supplied with adjustable feet from -5mm to +20mm. Depending upon the layout, height adjustable shelves should be provided between uprights with 1” of height adjustability. The ends and intermediate vertical supports should be 2mm thick aluminum extrusion with MS brackets of 2 mm thick. Toughened glass should be put-on over these shelves for taking care of bottle marks/corrosion. Suspended welded cabinet body should be of flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. The storage cabinets should be fixed and should also have the provision for leg space as per the need. It should have the provision for relocation anywhere easily as it should be an independent unit. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer. Shelf should be eight bend panel with 20mm height. Drawer tray should be of single piece construction. Drawer should be well supported on LH and RH ball slide suspension system. Steel door and drawer front should be of double wall construction with sound dampening material filled inside. Doors should be easily removable, and hinges should be easily replaceable. Knee space panel should be in 22-gauge construction. The dimensions of the cabinets should be W = 450/600 (as per the layout) D = 530mm, H = 635/485 mm.The entire material construction for the storage units should be MSCRCA: IS – 513 (1994). Thickness of LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel should be of 1.2mm thk. Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel should be of 0.8mmthk. The finish of the welded cabinets should be powder coated pure epoxy of thickness 40-50 microns. Handles should be Anodized Aluminium Recessed-Type, of CTC: 160.0mm. Units should have a locking facility with 180° and 10 lever cam lock mechanism. The hinges should be Knuckle-butt type SS Hinge. The screws should be SS304. Shutter should be of twin-type construction with sound dampening effect using profeel. Shutter cover should be equipped with Bump on for sound dampening. a.Worktop should be made of GRANITE should be 20 +/- 2 mm thick, jet black granite with edges having chamfer of 4 x 4 mm on top side. The overhang on the storage cabinet should be 25 mm at the front side and 30 mm at the sides • The backing material used for granite should be a neoprene mat of 6 mm thickness .Ball Slide for drawer units should be 500mm length.The sinks should polypropylene molded construction made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. Bowl size should be 500 L x 400 W x 300 D mm.The Bidder / OEM should have ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV). All ISO certificates must be from NABCB accredited agency. The Bidder / OEM should also have SEFA membership certificate for a continuous basis of last 12 years, SEFA 8 M-2016 test report, SEFA 8 M-2010 test certificate, SEFA 10 Certificate, DIN EN 13150, EN 14727 & India Design Mark certificate.
Overhead storage: Flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. Cabinet should be of square-edge construction. Doors are assembled with SS-304 hinge assy. Shelf should be eight bend panel with 20mm height. Steel door and drawer front should be of double wall construction with sound dampenening material filled inside.Doors should be easily removable and hinges are easily replaceable.Shutters should have glass or made of metal The Bidder / OEM should have ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV). All ISO certificates must be from NABCB accredited agency. The Bidder / OEM should also have SEFA membership certificate for a continuous basis of last 12 years, SEFA 8 M-2016 test report, SEFA 8 M-2010 test certificate, SEFA 10 Certificate, DIN EN 13150, EN 14727 & India Design Mark certificate.
Peg Board:These should be Single faced high grade stainless steel pegboard having a tray hole for water drainage and detachable pegs. The essence should be made up of I mm thick stainless steel (SS 304) whereas the pegs should be made up of polypropylene and will be adjustable with a minimum 10mm distance between each peg
Lab Incharge table: 1350 x 600: Worksurface:Made of 25 mm thick MDF-one side pre-laminate board confirming to IS-14587:1998with 0.4 mm PVC membrane pressed on to top.Gromet provided on work surface for wire management.Modesty Panel:Made of 25 thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.Understructure:Made of 25 mm thick pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990,edge banded with matching 2 mm thick PVC lipping.Hinge door storage:Made of 25 mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.Handle is provided for ease of opening.Storage is provided with cam lock for security. Size: 1350 (W) x 600 (D) x 750 (H) mm.The Manufacturer should have International Member Certificate of BIFMA ,AIOTA ,GRIHA,India Design Mark, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011, ISO 45001:2018 is mandatory. All the ISO certificates should be obtained from NABCB ( central Govt) accredited organization otherwise certificates will not be accepted. Manufacturer should have Green Guard Certification(UL), GREENGUARD GOLD, GREENPRO, BIFMA LEVEL, SCS IAQ. for some of its products.The bidder should have authorised service center in District.Bidder/OEM must provide Escalation Matrix of Telephone Numbers for Service Support. BIDDER/OEM must have Dedicated/toll Free Telephone No. for Service Support.The bidder has to submit bid specific authorisation certificate from the OEM.
Lab Assistant table: Worksurface: 18 mm thick pre-laminated board.All worksurface edges are duly sealed with 2 mm thick PVC beading.Understrucure:C-Frame CRCA MS sheet of 0.9 mm thick.Tubular frame MS ERW square tubes 25.4 mm x 25.4 mm x 1.2 mm thick.Modesty Panel 1.0 mm thick CRCA MS sheet.Drawer Unit shell 0.5 mm thick CRCA MS.Drawer tray 0.6 mm thick CRCA MS.Drawer front 0.8 mm thick CRCA MS sheet.Drawer slides friction slides of 1.2 mm thick CRCA MS.Lock 6 lever brass lock.Handles bult in plastic. Size: 900 (W) X 590 (D) X 750 (H) mm.The Manufacturer should have International Member Certificate of BIFMA ,AIOTA ,GRIHA,India Design Mark,ISO 9001:2015, ISO 14001:2015, ISO 50001:2011, ISO 45001:2018 is mandatory. All the ISO certificates should be obtained from NABCB ( central Govt) accredited organization otherwise certificates will not be accepted. Manufacturer should have Green Guard Certification(UL), GREENGUARD GOLD, GREENPRO, BIFMA LEVEL, SCS IAQ. for some of its products.The bidder should have authorised service center in District.Bidder/OEM must provide Escalation Matrix of Telephone Numbers for Service Support. BIDDER/OEM must have Dedicated/toll Free Telephone No. for Service Support.The bidder has to submit bid specific authorisation certificate from the OEM.
Lab Incharge chair:The seat & back should be made up of 1.2 +- 0.1 cm thk hot pressed plywood measured as per AQ method described in OCP-QLTA-PL 14-18, upholstered with fabric & moulded pu foam with pvc lipping all around. the back foam is designed with countered lumbour support for extra comfort to popiliteal area. It is moulded high resilence polyurethane foam of density =45+/- 2 kg/m3 and hardness load 16+-2 as per is:7888 for 25% compression. The seat cover is injection moulded in black co-polymer pp. The mechanism is designed with the following features:- 360 deg revolving type. 17 deg +-2 deg max tilt on pivot on center. upright position locking. tilt tension adjustment. the tabular frame is cantilever type & made up of dia 2.54 +-0.03cm x 0.2+-0.016cm thk ms erw tube & black powder coated (dft 40-60 microns). It has to be an adjustable stroke of 12.0+-0.3cm. The bellow is 3 piece telescopic type & injection moulded in black polypropylene. It is injection moulded in black 33% glass filled nylon-66 & fitted with 5 nos. twin wheel castors.the pedestal is of dia 66.3+-0.5cm . pitch center dia. (76.3+-1.0cm. with castors). The twin wheel should be injected moulded in black nylon. The product should be Indoor Advantage GOLD, GRIHA, GREENPRO, SCS IAQ certified. The metal parts to be pre treated with 6 steps of Degreasing, Water Rinse, Phosphating and Passivation and the Powder coating to be done following 9 Tank spray phosphating system followed by Oven drying at 140º C EMT after Pretreatment Camel Hump Oven for baking powder at 180º C and in-built cooling loop after Oven baking. The manufactures should have in house quality checking, steel processing and powder coating unit. The Manufacturer should have International Member Certificate of BIFMA ,AIOTA ,GRIHA,India Design Mark,ISO 9001:2015, ISO 14001:2015, ISO 50001:2011, ISO 45001:2018 is mandatory. All the ISO certificates should be obtained from NABCB ( central Govt) accredited organization otherwise certificates will not be accepted. Manufacturer should have Green Guard Certification(UL), GREENGUARD GOLD, GREENPRO, BIFMA LEVEL, SCS IAQ. for some of its products.The bidder should have authorised service center in District.Bidder/OEM must provide Escalation Matrix of Telephone Numbers for Service Support. BIDDER/OEM must have Dedicated/toll Free Telephone No. for Service Support.The bidder has to submit bid specific authorisation certificate from the OEM.
M/S EASTMAN
DESIGN-M
SANDIPAN
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .