Delhi

Financial BO

Works

Electrical Works

Maintenance and Operation of Street Light and High Mast on Delhi PWD Road under PWD DHC,ND/Central, New Delhi (SH- Replacement of Feeder Panel and Earthing work at various Roads under M-4512).

Public Works Department

New Delhi1 | Central Delhi, Delhi

Amount: ₹22.2 LCloses: 24 Apr 2026Closed

Bids

Percentage

5 Bids4 May 2026

#	Company	Quoted %	Amount	Rank	Status
1	L1₹14.5 LAdmitted-Finance GSTIN: 07ABBFM2740D1ZQ	-34.81%	₹14.5 L	L1	Admitted-Finance
2	L2₹16.7 LAdmitted-Finance GSTIN: 07AEJPV9273RIZ7	-25.00%	₹16.7 L	L2	Admitted-Finance
3	L3₹17.0 LAdmitted-Finance GSTIN: 07AFGPA9392E1ZGC 344 GALI NO 2 BLOCK C WEST KARAWAL NAGAR DELHI 110094 \| NORTH EAST \| DELHI \| 110094	-23.57%	₹17.0 L	L3	Admitted-Finance
4	L4₹18.5 LAdmitted-Finance GSTIN: 07ARTPS6846E1Z3GROUND FLOOR G 1154 A MANSAROVAR PARK SHAHDARA DELHI 110032 \| SHAHDARA \| DELHI \| 110032	-16.87%	₹18.5 L	L4	Admitted-Finance
5	L5₹24.3 LAdmitted-Finance GSTIN: 07AAPFA2943K1Z6	+9.48%	₹24.3 L	L5	Admitted-Finance

Tender Value

₹22.2 L

EMD Value

₹44,477

Closing Date

24 Apr 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer (E)

Address

EEE PWD DHC and ND/Central G.F. MSO Bldg. ND

Work Description

Maintenance and Operation of Street Light and High Mast on Delhi PWD Road under PWD DHC,ND/Central, New Delhi (SH- Replacement of Feeder Panel and Earthing work at various Roads under M-4512).

Tender Information

Tender ID

2026_PWD_290016_1

Reference Number

08/EE(E)/PWDDHC,ND/C/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Period of Work

30 days

Location

New Delhi1

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

15 documents required · 15 mandatory

Fee/PreQual/Technical

RequiredScanned copy of EMD (.pdf)

RequiredScanned copy of CPWD registered contractor shall upload the enlistment order (.pdf)

RequiredScanned Copy of Certificate of registration of GST (.pdf)

RequiredScanned Copy of GST Registration Certificate of the State as per NIT in page no.6 (.pdf)

RequiredScanned Copy of receipt for deposition of original EMD as per NIT in page no.6 (.pdf)

RequiredScanned copy of Valid Electrical License as per NIT in page no.6 (.pdf)

RequiredScanned copy of PAN Card as per NIT (.pdf)

RequiredScanned copy of Certificates of Work Experience For non CPWD registered contractor only (.pdf)

RequiredScanned copy of Affidavit as per clause 1.2.2 of CPWD 6 for non CPWD registered only (.pdf)

RequiredScanned copy of average financial turnover as per NIT in page no.6 for non CPWD contractor only (.pdf)

RequiredScannedcopyof Should not have incurred any loss as per NIT in page no.6for non CPWD contractor only (.pdf)

RequiredScanned copy of Should have a Solvency as per NIT in page no.6 for non CPWD contractor only (.pdf)

RequiredScannedCopyof bidder hasnot obtained GSTregistration inState as per NIT forCPWD, non CPWD contractor (.pdf)

RequiredRead carefully Note as per NIT in page no.6,7 for CPWD and non CPWD contractor (.pdf)

Finance

RequiredPricebid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹44,477

Important Dates

Last Activity

4 May 2026

Published

18 Apr 2026

Bid Opening

24 Apr 2026

Download Starts

18 Apr 2026

Download Ends

24 Apr 2026

Submission Starts

18 Apr 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (7 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount	Item Code
1Fabrication, supplying and installation of outdoor type, sloping roof cubical feeder pillar of surface area not less than 1 sq meter with minimum depth of 35 cm made out of CRCA M.S. Sheet of 2 mm thick (14 SWG) duly compartmentalized having 4 strip bus bar of 200 Ampers capacity double door with double locking arrangement (one sliding lock in front and one godown lock each at front and rear for protection) dust proof vermin process, duly fixed on M.S. angle iron frame work of size 50 mm X 50 mm X 6 mm (NS) 90 cm long legs, out of which 45 cm duly grouted in cement concrete foundation of size 30 cm X 30 cm X 50 cm deep 1:2:4 (1 cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) duly painted with one coat of red oxide & two coats of superior quality enamel paint in approved shade and colour etc. complete with testing, earth studs, earth strips etc. as required. (Note:- PROPER SPACE FOR ENERGY METER)
2Supplying & fixing/replacement of following accessories in the feeder pillar complete with testing & commissioning etc. as required. (a) 150 A, 16 KA,TPMCCB
2.01	(b) 63/100 Amp, 16 KA, TPMCCB	-	Nos.	-	-	BI01010001010000000000000515BI0100001115
2.02	(c) Digital type VAF + PR Meter	-	Sets	-	-	BI01010001010000000000000515BI0100001116
2.03	(d) Indicating Light LED type with 2A Ampers SP MCB (3 Nos.)	-	Sets	-	-	BI01010001010000000000000515BI0100001117
2.04	(e) 100 Amps, 3 Pole Power Contactor	-	Nos.	-	-	BI01010001010000000000000515BI0100001118
2.05	(f) Astronomical Digital Time Switch (3 Phase)	-	Nos.	-	-	BI01010001010000000000000515BI0100001119
2.06	(g) 400/5 Amp. CT (3 Nos.)	-	Sets	-	-	BI01010001010000000000000515BI0100001120
2.07	(h) Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.	-	Nos.	-	-	BI01010001010000000000000515BI0100001121
3Fabrication, supplying & fixing of wiremesh protection frame work fabricating with 40 x 40 x 6 mm thick M.S. angle iron & T iron of 40 x 40 x 6mm thick i/c providing & fixing wiremesh of section 75mm x 25mm of 8 SWG shall have the legs of angle iron of size 40 x 40 x 6mm of length 15cm and is to be grouted in cement concrete (1:2:4) foundation. The frame with having one side door is to be fixed around the various electrical & mechanical equipment & appliances with interlocking arrangement & all frame is to be painted with two coats of red oxide, primer and two coats of synthetic enamel paint of approved colour & quality etc. as required.

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 2.78 MB

Work Item Documents

BOQ_385038.xls

BOQ • 0.35 MB

Ready to Participate?

Download all tender documents and submit your bid