PROVN OF ROOM WITH SEMI-PERMANENT SPECIFICATION IN PARKING AREA, PROVN OF REST ROOM FOR CANTEEN STAFF, PROVN OF GRC SCREEN AT MAIN PORCH, PROVN OF STORM WATER DRAIN WITH PUMPING SYSTEM, SPL REPAIR OF POINT WIRING FOR RENOVATED ROOMS INCLUDING CERTA

Amount

Surface excavation not exc 30 cm deep & averaging 15 cm deep & getting out in hard/dense soil complete all as specified & as directed.

Excavation in trenches not exc. 1.5 metre wide & not exc. 1.5 metre in depth for foundations etc and getting out as in hard/dense soil complete all as specified & as directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exc. 25 cm deep as in soil complete all as specified & as directed.

Removing excavated surplus materials (soil) out side MD land complete all as specified & as directed.

M&L plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation, filling & mass concrete complete all as specified & as directed.

M&L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate (nominal mix) as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slab, under reamed piles and mass concrete complete all as specified & as directed.

M&L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate (nominal mix) as in columns, pillars, piers, post & struts etc complete all as specified & as directed.

M&L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate (nominal mix) as in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed beams, cantilevers, bressumers, lintels over 1.5 m span etc complete all as specified & as directed.

M&L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate (nominal mix) as in slab supported on walls, beams and columns in floors, roof, landings, balconies, canopies, deck slab and in shelves & the like etc complete all as specified & as directed.

M&L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate (nominal mix) as in chajjas, rough finished surface complete all as specified & as directed.

M& L High Yield Strength Deformed TMT bars Fe-500 grade 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed.

All as item No 11.00 here in before but using TMT bar 6 to 8mm dia complete all as specified & as directed.

All as per item No. 11.00 here in before but 5mm dia and over up to and including 10mm dia as in stirrups spacers and binders complete all as specified & as directed.

Use and waste of formwork to sides of concrete foundations, plinth beams, footings, base of columns, pile caps and similar work, vertical or to batter, for rough finished surfaces complete all as shown on drawings and as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surface complete all as specified and as directed.

Use and waste of formwork to soffits of chullah hood, Chajjas, troughs and similar items including edges etc complete all as specified and as directed.

Use & waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and as directed.

Use & waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exc 5cm but not exc 10cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work rough finished surface complete all as specified and as directed.

All as per item No 18.00 here-in- before but exc 10cm but not exc 20cm wide complete all as specified and as directed.

Filling under the floors using approved excavated soil including watering, ramming spreading in layers not exc 25 cm thick complete all as specified and as directed. (Note: Earth obtained from excavation shall be re-used under this item)

M & L hard core of broken stone or boulder of gauge not exc 63 mm deposited, spread and levelled in layers not exc 15 cm thick watered & rammed to a true surfaces complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan exc 6 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

M & L 40 mm thick PCC 1:2:4, type B-0, using 12.5 mm graded stone aggregate, as in damp proof course complete all as specified and as directed.

M & L for applying evenly a coat of blown type bitumen @ 1.50 Kg/Sqm and blinding with clean dry sand @ 0.05 Cum/ Sqm over damp proof course complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base, finished fair & even to receive top layer etc complete all as specified and as directed.

M & L 15 mm thick rendering in cement mortar (1:6), on brick or concrete wall surface, finished fair & even complete all as specified and as directed.

M & L 10 mm thick rendering in cement mortar (1:4) on ceiling surface, finished even & smooth without using extra cement complete all as specified and as directed.

M&L 3mm thick wall care putty (white cement based) on newly plastered wall surfaces, trawelled to an even and smooth surfaces including sand papering etc complete all as specified and as directed.

M&L 3mm thick wall care putty (white cement based) on newly plastered ceiling surfaces, trawelled to an even and smooth surfaces including sand papering etc complete all as specified.

M & L 15 mm thick rendering in cement mortar (1:4), on brick or concrete wall surface, mixed with water proofing compound (if required), finished fair & even without using extra cement complete all as specified and as directed.

Supply only Water proofing compound ISI marked complete all as specified and as directed.

S&F powder coated, aluminium frame, of approved colour, with partially glazed shutters, single/ double leaf, divided into two glazed panels, including aluminium anodised snap beading and rubber gasket/lining for fixing of glass complete all as specified and as directed. The frame and shutter shall be made out of the following sections:- (a) Aluminium powder coated door frame 101.60mmx44.45mmx1.60mm fixed with aluminium trust bolt in walls by drilling. (b) Aluminium powder coated side rail of shutter section 85mmx44.5mm x1.6mm (c) Aluminium powder coated top rail of shutter section 114.30mmx24.4mm x1.6mm (d) Aluminium powder coated middle rail of shutter section 83.5mmx44.5mm x1.6mm (e) Aluminium powder coated bottom rail of shutter section 150mmx25.4x 1.60mm (f) Aluminium powder coated tower bolt 200 mm long - 02 Nos in each leaf (g) Aluminium powder coated handle 250 mm long - 02. Nos in each leaf. (h) Glass Panel shall be 5.5 mm thick tinted glass. (j) 12mm thick prelaminated particle board laminated both side exterior grade (k) Brass 6 lever Mortice lock with duplicate keys.

S& F powder coated aluminium window / ventilator using 63mx38mmx1.6mm chowkhat with 45mmx45mmx1.6mm openable section as in shutter with 5mm thick glass panes (plain/tinted) of approved make with rubber for fixing glass with & including aluminium powder coated builder hardware such as handle 100mm-02 Nos, tower bolt 100mm-02 Nos, hook & eye 150mm - 01 No per leaf, butt hinges 100mm - 02 Nos etc complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 including one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed.

S&F steel work in tubular column, purline, rafter etc using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed.

S&F mild steel plate (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with welded attachment to GI pipe in base/ connections etc. including one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed.

S&F Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long dia of neck exc 12mm but not exc 20mm length complete all as specified and as directed.

S&F in position galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, Chajja etc fixed with self tapping screws as specified high tensile alloy steel trap sheet having 55 MPA yield strength and zinc (galvanized ) + Aluminium combined, coating of 150 GSM /PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to7 micron Epoxy primer fixes, RMR 1040 profile width 1125 mm complete all as specified & as directed.

All as per item No 38.00 here in before but plain sheet as in ridge/valley/gutter complete all as specified & as directed.

M&L for applying two coat of oil bound distemper over and including a coat of alkali resistant primer including necessary preparation of new plastered ceiling surface complete all as specified & as directed.

M&L applying two coats of Acrylic Smooth exterior paint of required shade on new wall surface, @ 1.67 litre per 10 Sqm over and including priming coat of exterior primer @ 2.20 Kg/10 Sqm, including necessary preparation of new plastered ceiling surface complete all as specified & as directed.

M&L for applying two coat of oil bound distemper over and including a coat of alkali resistant primer including necessary preparation of new plastered wall surface complete all as specified & as directed.

M&L for two coats of synthetic enamel paint over and including a coat of red oxide primer on new steel surfaces width or girth exc 10cm including preparation of surfaces complete all as specified and as directed.

M&L 40mm thick PCC 1:2:4, type B-1, using 20mm graded stone aggregate, finished even & smooth using extra cement as in floor complete all as specified and as directed.

S&F 3 mm thick glass dividing strip, 38mm wide, inserted in position for flooring, conforming to approved design complete all as specified and as directed.

M&L 75 mm PCC 1:3:6, type C-1, using 20mm graded stone aggregate, as in plinth protection/hard standing and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Excavation in post holes (or similar holes) in hard or dense soil, each not exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering & well ramming and removing surplus soil out side the premises & making good surface complete all as specified & as directed.

M&L PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified & as directed.

S&F mild steel rolled sections as in framing for cladding, glazing and the like using Fe-290 (Gde E-165), fixed with connecting plates, angle cleats, base plate etc with & including painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication etc complete all as specified & as directed.

S&F 60mm thick glass reinforced concrete (GRC) screen casted with power spray concrete mix, of shape, design and pattern as approved by GE complete all as specified & as directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with two coats of tar or coal tar, black paint complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 as in Concrete bed to drain pipes of 300mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

S&F 300mm internal dia, Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan exc 6 metre mean radius, built in cement mortar 1:4 complete all as specified and as directed.

M & L 10 mm thick rendering in cement mortar (1:3) on ceiling surface, finished even & smooth without using extra cement complete all as specified and as directed.

S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar article exc 5 Kg each as in manhole cover complete all as specified and as directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

Demolition of cement concrete in ground floor & paving not exc 15 cm thick below or above ground floor including removal from site complete all as specified and as directed.

Taking down cement plaster on concrete or brick surface of any description including finishes etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

M&L 10 mm thick Vitrified Ceramic tiles (square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors & skirting over & including 10mm thick adhesive of approved make and pointed in white cement mixed with pigment to match the shade of tile complete all as specified and as directed.

M&L 7 to 8 mm thick, Non-skid coloured Ceramic tiles, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles, laid over & including 15mm thick screed bed or bedding layer of cement mortar 1:6 as in flooring complete all as specified and as directed.

M&L glazed coloured ceramic tiles, 350 x 250 x 7 mm/450x350x7mm thick, set and jointed in cement slurry, laid over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, set, jointed and pointed in white cement mixed with colour pigment to match the shade of tile as in vertical surfaces complete all as specified and as directed.

M&L 18 mm thick granite stone slab of approved shade (Zed Black) (superior Quality) (table rubbed and polished as in floors, jambs, steps, cooking platform, shelves etc and the like, punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement slurry, over & including 20 mm thick screed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite slab including rubbing and mirror polishing and moulding complete all as specified and as directed. Note: Granite stone shall be in one length not less opening size in Door / window in jambs & length shall be as per the length of cill & jamb of door/ windows), etc.

Supplying and laying in repair CPVC pipe, 20mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete with CPVC fittings and brass threaded fittings like socket, elbow as required including all necessary cutting and fixing of plumbing fittings with CP extension pieces if required, for concealed work and clamping including taking down old pipes complete all as specified and as directed.

All as per item No 65.00 here in before but 25 mm outer dia pipe complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white flat back of size 550mmx400 mm with pedestal including cutting for and pinning in end of brackets, 15mm angular stop cock, 32 mm waste fittings, PVC connections as per required size, brass chromium plated waste coupling for glazed basins etc including flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and as directed.

S&F in repair Pillar taps for 15mm bore pipe, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S &F in repair chromium plated tubular towel rail 20mm dia 60cm long between flanges complete all as specified and as directed.

S&F in repair Wash down water closet (Pedestal pattern) using vitreous China wash down water closet pan ( Pedestal pattern) white including fixing bolts, PVC valve less, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets, Flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern, Plastic water closet seat, white, recessed bottom pattern and cover and mild steel chromium plated or aluminised hinging device, PVC connection 375mm long etc complete all as specified and as directed.

S&F in repair health faucet with 1 m long flexible tube in brass CP finish including wall hook for EWC complete all as specified and as directed.

S&F in repair Stainless steel kitchen or laboratory sink, with drainage board, made of 1 mm thick stainless steel sheet, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm depth, with plugs, washers and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe etc complete all as specified and as directed.

S & F in repair 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair 15 mm bore chromium plated fancy type stop cock with long shank and cup (concealed type) complete all as specified and as directed.

M&L for cutting chases for concealed water tubing or pinning end etc and making good the facing /cutting in cement mortar 1:3, width exc 10 cm but not exc 20 cm girth in brick walls etc complete all as specified and as directed.

S&F in repair PTMT Liquid soap container fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning for refixing or removal from site (measured overall as fixed along the centre line over fittings and accessories) including taking out of trenches, if required complete all as specified and as directed.

S & F PVC (SWR) floor traps 75mm dia of out let with CP grating including jointing to pipe with solved cement or adhesive complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipe, single socketed, in any length, with rubber ring jointing with solved cement or adhesive laid in trenches or in floor complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipe, single socketed, in any length, with rubber ring jointing with solved cement or adhesive laid in trenches or in floor complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipe, single socketed, in any length, with rubber ring jointing with solved cement or adhesive fixed to walls with mild steel clamps complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) bends any radius with oval access door including fixed to pipe with solved cement or adhesive complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) bends any radius with oval access door including fixed to pipe with solved cement or adhesive complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) plain bends any radius including fixed to pipe with solved cement or adhesive complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) plain bends any radius including fixed to pipe with solved cement or adhesive complete all as specified and as directed.

S&F 110mm PVC (SWR) WC connector with lip ring including fixed to pipe with solved cement or adhesive complete all as specified and as directed.

S&F PVC (SWR) reducers 110mm including jointing with solvent cement complete all as specified and as directed.

S& F PVC (SWR) cowl 75 mm bore including fixed to pipe with solved cement or adhesive complete all as specified and as directed.

M&L for heavy duty coloured (approved colour) fully vitrified paving tiles of size 300mmx300mmx10-12mm thick, set and jointed in neat cement slurry and pointed in coloured or white cement to match the shade of tiles over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and as directed. Make: Somany (Durastone) / Marbito (M stone)/ Riwasa (Parkland series) /Johnson(Endura)/ Nitco(Kratos)

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 150mm dia, set in cement mortar complete all as specified and as directed.

S&F Reinforced concrete pipes 150mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L cement mortar concrete bed to drain pipes in PCC 1:3:6, type C-2, using 40 mm graded crushed stone aggregate, including packing under and haunching against the sides of pipes after they are laid and tested, bores of pipe 150 mm complete all as specified and as directed.

M&L for applying two coat of oil bound distemper over and including a coat of alkali resistant primer on old plastered wall surface complete all as specified & as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and GI Ceiling frame work etc complete all as specified and as directed.

S&F Gl frame work grid size 605x605mm for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

S&F Hangers 3mm dia GI (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed.

S&F 15mm thick integral densified micro look edged eco friendly, bio safe anti-microbial & anti-bacterial fungal free (suitable for Hospital RH-100 product), light weight, calcium silicate false ceiling tiles plain with pin holes of approved texture of size 595x595mm, at any height, in true horizontal level, suspended on inter locking grid screws including cutting/making opening for service like diffusers, grill, light fittings, fixtures smoke detector etc wherever required of Aerolite/ Armstrong and equivalent complete all as specified and as directed.

Taking down of chowkhat or frame (without taking off shutter from frame) & refixing in other opening, area exc 1.5 Sqm but not exc 4 Sqm each including builder hardware fitting complete all as specified and as directed.

S&F MS rolled section as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F MS rolled section in framed work as in doors or gates of angle or other section with gusset plates using FE-290 (Gde-E-165), rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

Mild steel, plain, black sheeting hearths 1.25mm thick; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

S&F in repair Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including taking down old gate complete all as specified and as directed.

S&F Mild steel barrel tower bolts, 200mm long, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

S&F Mild steel sliding door bolts, 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F butt hinges, 125mm, heavy weight, cold rolled, mild steel & fixed complete all as specified and as directed.

S&F Cast iron or malleable cast iron handle cast type, 150mm, stove enamelled black & fixed complete all as specified and as directed.

S&F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe using vitreous China Urinal, Half stall type, white with & including and waste pipe etc complete all as specified and as directed.

S&F in repair powder coated of any colour aluminium anodised section 63.50x38.10x2mm thick gauge for aluminium partition wall and panel size not exc 1.00mx1.00m including 5mm thick plain/frosted tinted glass on top half portion and 12mm thick pre-laminated sheet fixed in half bottom portion complete & including all accessories of glazing clips and rubber etc complete all as specified and as directed.

Supply, installation, testing and commissioning of Submersible pump set suitable for 415 V , 3 phase system having capacity 5 HP including suitable Foot Valve with complete inlet and outlet pipe for rain water discharge fully automatic sensor system complete all as specified and as directed.

Supply, fixing, testing and commissioning of DOL starter for up to 7.5 HP motor and including 3 phase copper conductor cable from starter to motor with complete accessories complete all as specified and as directed.

M & L 100 mm bore, GI pipe, medium grade (Discharge pipe) including fitting and fixture for suitable dia covering as per site requirement complete all as specified and as directed.

Supply and laying or fixing or passing through protection pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 Sqmm nominal cross section, 4 core in service connections complete all as specified and as directed.

M&L for providing dry river sand as in sand cushioning to under ground electric cable including punning down of sand in layer complete all as specified and as directed. Note: For measurement purpose punned thickness of sand only shall be considered.

Supply and laying in trenches unreinforced pre-cast cement concrete cable cover LV, type 2, flat size 250 mm x 150 mm x40 mm complete all as specified and as directed.

Supply, fixing and installation enclosure DB suitable for MCCB 63 Amp 50 Hz, 415 V with rupturing capacity 16 KA including enclosure box with complete connection complete all as specified and as directed.

S&F MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA complete all as specified and as directed.

M&L in repair point wiring (suitable for modular switches ) for one light/fan point, controlled by one switch, 5 Amps, one way, single pole complete with 1.5 Sqmm, single core, multi stranded, copper conductor PVC insulated, FRLS, unsheathed cable, 1100 Volts grade, drawn through and including rigid, non-metallic, 25mm dia PVC Conduit, concealed in walls including modular terminal box and cover plate with frame, concealed in wall including 1.5 Sqmm size PVC insulated, unsheathed, 1.50 Sqmm copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

All as per item No. 118.00 here in before but one three pin 5 Amps socket out let on independent board complete all as specified and as directed.

All as per item No. 118.00 here in before but one three pin 5 Amps socket out let on same board complete all as specified and as directed.

All as per item No 118.00 here-in-before but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire with 2.5 Sqmm single core cable for one 3 pin, 15 Amps socket out let point on independent board complete all as specified and as directed. Note for item Nos 118.00 to 121.00:- Cost of modular plate with frame and flush box of suitable size shall deemed to be included in rate quoted by the contractor.

S&F in repair Switch modular type 6 Amp, 230 Volts, one way, single module complete all as specified and as directed.

S&F in repair socket Modular type 6 Amp, 2/3 pin, 2 module, 230 Volts complete all as specified and as directed.

S&F in repair Switch modular type 16 Amp, 230 Volts, one way, single module complete all as specified and as directed.

S&F in repair socket modular type 6/16 Amp, 2/3 Pin, 2 module, 230 Volts complete all as specified and as directed.

S&F in replacement modular Fan step regulator, 120W, 2 module complete all as specified and as directed.

M&L in replacement sub main wiring with 2 runs of 2.50 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 2.50 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

M&L in replacement sub main wiring with 2 runs of 6.00 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, concealed, PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 6.00 Sqmm size PVC insulated copper conductor complete all as specified and as directed. Note:- Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F in replacement 2 X 2, panel, ultra modern, recess mounting luminaries with high brightness, SMD LED 34Watt, colour temp 3000 K, as light source suitable for ceiling including connection with flexible wire and all fixing accessories complete all as specified and as directed. (Make - Havells Cat Part No PLUTONEO2X2PLR34WLED840S or equivalent model of Make mentioned in PS)

Supply, fixing and connecting ceiling Fan, 1400 mm sweep, single phase, copper winding, AC, Energy saving complete ll as specified and as directed. Note: Old fan to be deposited in MES Store Yard.

M&L Earthing complete with galvanised Iron earth plate electrode 600x600x6.3 mm thick, buried directly in ground (earth pit not less than 2.25 metre deep below GL) with top edge of the plate not less than 1.5 metre below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 25X4 mm GI earth strip electrode welded and revetted to earth plate up to a distance of 7.5 metre long, GI earth strip encased in and including 40mm bore GI light grade pipe, with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, MS funnel with wire mesh fixed on water pipe including excavation earth work, Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I and test point including testing on completion complete all as specified and as directed. Note:- The unit rate quoted shall be include for necessary excavation and earth work , earth strip connected to test point up to 7.5 metre as per site requirement, PCC 1:3:6 type for earth pit & Pit cover, funnel with wire mesh including GI medium grade watering pipe 15mm bore & 40 mm dia for supporting of earth strip/wire.

S & F in replacement GI earth strip of size 25 x 4 mm , earth strip fixed with insulator on wall complete all as specified and as directed.

SETHI ENTERPRISES

Shri Radhakrishna Associates

JIWAN DASS THAREJA AND SONS

national engineering