SPECIAL REPAIRS TO BUILDING No T 61 44A AND T 39 42BCD OF PCTC UNDER GE NORTH BANGALORE

Amount

B/R WORKS

Dismantling Asbestos cement corrugated, semi corrugated sheets as in roof coverings including ridges etc complete all as specified and as directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any position as in framed work etc., complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets etc., complete all as specified and as directed.

Demolition of brick work /stone masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

Demolition of un-reinforced cement concrete and paving not exc. 15 cm thick below or above ground level complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not specifically provided for including reinforcement cut as required to facilitate demolition complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed.

Dismantling stone set paving of any description or thickness as in floors, aprons etc., laid bedded and pointed in any cement mortar including removing off the premises complete all as specified and as directed.

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface

Taking down chowkats or frames with shutters (without taking off shutter from frames) area not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc., including making good the distrubed surface of wall complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) area exc. 1.5 sqm but n exc 4 sqm each, cutting holes for removing the hold fast etc., including making good the distrubed surface of wall complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed.

All as per Sl Item No. 1.013 above but 20 mm dia bore.

All as per Sl Item No. 1.013 above but 25 mm dia bore.

Dismantling cast iron or reinforced concrete / PVC / SGSW drain pipe up to 150mm dia including fittings, jointed in cement mortar and taking out from trenches if reqired complete all as specified and as directed.

Dismantling water tanks exc. 500 ltr but not exc. 1000 ltr capacity and removing to store etc., complete all as specified and as directed.

All as per Sl Item No. 1.017 above but capacity exc. 1000 ltr & not exc. 2000 ltr.

Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed.

Rolled Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.

Decorated PVC false ceiling of size 600mm x 600mm x 5 mm thick, used as a panel insert in a frame work made out of using anodized aluminum T-section of size 25mm x 25mm in square pattern of grid size 600mm x 600mm, the aluminum frame work shall be supported from the ceiling with the help of J hook and 4 mm GI wire of required size to maintain the proper levels etc., the aluminum frame work is supported on side wall with the use of aluminum L section of size 25mm x 25mm angle complete all as specified and as directed.

Plain Cement Concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub base to floors, 75mm thick complete all as specified and as directed.

Plain Cement Concrete (1:2:4), type B-0, using 12.5mm graded stone aggregate, 25 mm thick as in levelling course of flooing etc complete all as specified and as directed.

Non skid ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding 0.11 Sqm but n.exc . 0.18 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Matt finish non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but n.exc.0.38 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:6) all as directed.

Machine cut and pre polished Kota stone slab flooring 20-25mm thick over and including cement screed bed or bedding layer of cement mortar 20mm thick in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

All as per Sl Item No 1.027 above but as in skirtings with backing coat of 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces complete all as specified and as directed.

Glazed coloured ceramic tiles as in vertical surfaces 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including backing coat 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces complete all as specified and as directed.

All as per Sl Item No 1.028 above but as in skirtings with backing coat of 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces complete all as specified and as directed.

75 mm thick plain cement concrete (1:3:6) type C2 using 20 mm graded stone aggregate as in paving/ plinth protection laid in panels with necessary form work, finished rough surfaces of concrete including provision of construction joints filling with sealing compound Grade "A"complete all as specified and as directed.

Rubber pressed, cement concrete designer chequered tiles of size 300mm x 300mm x 25mm thick exterior grade, coloured, glossy finish, set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over and including screed bed or bedding layer of cement mortar 20mm thick in CM (1:6), complete all as specified and as directed.as in floors etc. complete all as specifed and as directed

M-sand spread and compacted in floors as in cushioning material complete all as specified and as directed.

Machine presssd pre-cast cement concrete interlocking coloured paving blocks of glass fibre reinfoced, glossy finished vibro compacted any shape and size conforming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and as directed.

Precast cement concrete block masonry with solid blocks exc. 10 cm in width and setting in cement mortar 1:6 type C1 1:3:6 ( using 20 mm graded aggregate) complete all as specified and as directed.

Brick work with sub class 'B' bricks built in CM(1:6), straight or curved on plan exc 6 mtr mean radius, using old size bricks complete all as specified and as directed.

Brick work (except bricks)with sub class 'B' bricks built in CM(1:6), straight or curved on plan exc 6 mtr mean radius, using old size bricks complete all as specified and as directed.

15mm thick rendering on brick or concrete surface in cement mortar (1:6) and finishing the surface with even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick in CM(1:4) mixed with water proofing compound as per manufacturers instructions finishing the surfaces even and smooth without using extra cement including necessary scaffolding complete all as specified and directed. NOTE:- WPC will be measured and paid separately under relevant items.

Supply only liquid water proofing compound all as specified and as directed.

1.25 mm thick pressed steel frame of size 105 x 60mm suitable for doors with one ore more rebate including necessary fixing lugs, hinges, locks, strike plate etc complete all as specified and as directed.

Plain Cement Concrete (1:3:6), type C-1, using 20mm graded stone aggregate as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed.

35mm thick flush shutters with solid core construction with decorative choice lamination on both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed.

Solid PVC door frame, single rebated of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed. NOTE:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.

Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc., complete all as specified and as directed.

Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete fixed in repairs all as specified and as directed.

Powder Coated (minimum thickness of powder coating 50 micron) aluminium sections weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing (door and window), handles 2 Nos in each shutter, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed.

Box type Steel windows/ventilators double side shutters (windows side hung type, ventilators top hung type) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, shutters box type made out of CRC Sheet of 40x20x1.0mm, windows & ventilator shutters shall be of glass and gauge type, fixed with box type hinges, aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, telescopic stays, etc complete all as specified including 12mm square guard bars/grill welded with steel frame (100c/c horizontically) all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be make combined for steel frames, steel shutters and Guard bard/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges,Telescopic stays, locking arrangements. (ii) 4 mm thick sheet glass and wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle,hinges and locking arrangements shall not be accounted for payment purpose . (iv) All Windows/Vent design as per CECZ TD drg No 539.

12mm thick Block boards, grade 1 quality, exterior grade, commercial type, water proof, termite proof, fixed with screws to timber frame work as in panelling/ ceiling / cub board shutters, kitchen cabinet, shelves etc., fixed in repairs complete all as specified and as directed.

0.90 mm thick decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, fixed to door/cub board shutters including teak wood beading 3mm thick and 18 mm wide and painting to match the existing colour etc complete fixed in repairs all as specified and as directed.

Second class hard wood scantlings, clean sawn surfaces for grid work of wall panelling fixed with nails in the wall etc., complete all as specified and as directed.

Aluminium anodised tower bolt 200 mm long of extruded section etc., complete all as specified and as directed.

Aluminium anodised tower bolt 150 mm long of extruded section etc., complete all as specified and as directed.

Aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed.

100 mm thick stainless steel butt hinges, heavy weight, and fixed etc complete all as specified and as directed.

150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed.

150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floors etc complete all as specified and as directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

4.0 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares not exceeding 0.5 sqm in each pane all as directed.

5.5 mm thick tinted sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares exceeding 0.5 sqm in each pane all as directed.

Plain Cement Concrete, (1:2:4), type B 1, using 20mm graded stone aggregate as in copings, chajja, kerbs, roof padding / staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat rough finished surfaces of concrete complete all as specified and directed.

Reinforced Cement Concrete, nominal mix, type B1, (1:11/2:3) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed.

Precast reinforced cement concrete type B1, (1:11/2:3) using 20mm graded stone aggregate as in window or door cills, lintels, bressumers, with plain fair faces,including chamfers,weatherings,throating etc. and setting in mortarcomplete with joints to match set in CM (1:6) complete all as specified and as directed.

Precast Reinforced Cement Concrete (1:2:4), type B1, using 20mm graded stone aggregate as in landings, cover slabs for man holes, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 etc complete all as specified and as directed.

TMT steel bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

TMT steel bars 6mm to 8mm dia as in stirrups cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

16mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, fixed to wall, ceiling or laid in floors complete all as specified and as directed.

20mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, fixed to wall, ceiling or laid in floors complete all as specified and as directed.

25mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, fixed to wall, ceiling or laid in floors complete all as specified and as directed.

Rotational moulded polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified in SSR part I capacity of tank 2000 ltrs capacity complete complete all as specified and as directed.

Rotational moulded polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified in SSR part I capacity of tank 1000 ltrs complete all as specified and as directed.

25mm dia Ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed all as specified and as directed.

25 mm dia gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

Vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste stainless steel coupling and LDPE pipe 600 mm long fixed in repairs complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat black, closed pattern with flat bottom and cover, mild steel chromium plated or aluminium hinging device etc complete of cera model cat pt no. 2008 fixed in repairs complete all as specified and as directed.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor fixed in repairs complete all as specified and directed.

Viterous China urinals, bowl type (back or corner wall type), complete fixed in repairs including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.

PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, fixed in repairs complete all as specified and directed.

15mm dia pillar taps, PTMT, fancy type any colour screwed, for iron pipe and fixed in repairs complete all as specified and directed.

15 mm bore dia bib taps,(minimum weight 120gms) fancy type, long body, standard of PTMT any colour high pressure screwed for iron pipe fixed in repairs complete all as specified and directed.

125 mm dia bore swivel type shower of PTMT any colour for fixied to15mm dia pipe. (minimum weight 40gms) fixed in repairs complete all as specified and directed.

15mm dia stop cock / angle cock of PTMT fancy type any colour screwed, for iron pipe fixed in repairs complete all as specified and directed.

PVC connections 15mm dia with PTMT nuts of length of 450 mm long fixed in repairs complete all as specfied and as directed.

PVC urinal waste pipe 32mm dia 800mm long, complete all as specified and directed

75mm bore PVC (SWR) multi floor trap with plain grating including jointing with solvent cement complete all as specified and as directed.

Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete fixed in repairs all as specified and as directed.

110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints laid in trenches and necessary fittings fixed in repairs complete all as specified and as directed.

75 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints laid in trenches and necessary fittings fixed in repairs complete all as specified and as directed.

110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed.

75 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed.

PVC (SWR) bends type 'B' of any radius, 110 mm dia complete all as specified and directed.

PVC (SWR) bends type 'B' of any radius, 75mm dia complete all as specified and directed.

PVC (SWR) vent cowl 110 mm dia, type 'B' all as specified and as directed.

Stainless steel decorative curtain rod of 25 mm bore with wood finishe weight not less 400 gms per running meter including fancy finale caps cap etc fixed in repairs complete all as specified and as directed.

Stainless steel bracket for curtain rod of 25 mm dia made out of stainless steel flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with rawl plug of size not less than 50 mm long etc complete all as specified and as directed.

Complete removal of existing treatment of internal and external wall surfaces by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface including rubbing and washing etc complete all as specified and as directed.

2mm thick wall care putty on new / old plastered surface of wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed.

Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer complete all as specified and as directed.

Preparing old plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer complete all as specified and as directed.

Preparing newely plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Preparing old plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Preparation of new or previously untreated steel and iron surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel over a coat of red oxide primer, complete all as specified and directed.

Preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

E/M WORKS

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc., removing materials to stores for keeping in safe custody or for offering credit and making good disturbed surfaces of walls / floors to match the existing surface complete all as specified and as directed.

Point wiring, modular type, with 1100 volts grade 1.5 sq.mm PVC insulated unseathed multistranded copper conductor cable drawn into and including rigid PVC conduit with accessories concealed in walls / roof / floors with continuous 1.5 sq.mm PVC insulated unseathed multistranded copper conductor cable as earth continuity conductor and connecting to common earth dolly including modular terminal boxes concealed in wall covered with modular cover plates fixed with cadmium plated iron screws for mounting of switch/sockets suitable for (a) for one light /celing fan and exhaust fan point controlled by one one way switch.

(b) One 3/5 pin socket outlet 5 Amps on the same board.

(c) One 3 pin socket outlet 5 Amps on independent board.

Point wiring, modular type, with 1100 volts grade 4.0 sq.mm PVC insulated unseathed multistranded copper conductor cable drawn into and including rigid PVC conduit with accessories concealed in walls / roof / floors with continuous 2.5 sq.mm PVC insulated unseathed multistranded copper conductor cable as earth continuity conductor and connecting to common earth dolly including modular terminal boxes concealed in wall covered with modular cover plates fixed with cadmium plated iron screws for mounting of switch/sockets complete all as specified and as directed.

Modular switch 1 way, 6 Amps, one module including taking down the existing complete all as specified and as directed.

Modular switch 1 way 16 Amps, one module including taking down the existing complete all as specified and as directed.

Modular socket, 6 Amps, 2/3 pin combined, two module including taking down the existing complete all as specified and as directed.

Modular socket, 6 Amps / 16 Amps, 2/3 pin combined, two module including taking down the existing complete all as specified and as directed.

Ceiling rose surface bakelite, 65 x 50 mm three terminals 230 volts AC Single phase fixed in repairs complete all as specified and as directed.

Modular fan regulator, five stepped, 120 Watt, 2 Module including taking down the existing complete all as specified and as directed.

Energy saving ceiling fans, 230 Volts, 26 Watts, single pole, 1200 mm sweep, high speed of approved colour with remote control and two years warranty certificate from the manufacturers, with latest BEE five star rating and BLDC technology all as per Havells Model No :- Efficiencia Neo (BLDC 26W) or techno commercially equivalent models specified in PS complete with down rod and GI hook with welding work, wire connections from ceiling rose to ceiling fans, with complete accessories including writing of MES No with unit name on ceiling fans using approved stencil with synthetic enamal paint including taking down the existing complete all as specified and as directed.

Sub main wiring with two runs of single core FRLS grade 2.5 sq.mm, 1100 volts grade multi stranded copper conductor cable along with one run of FRLS grade 1.5 sq.mm PVC insulated single core multistranded copper conductor cable as earth continuity conductor drawn through and including non metalic rigid PVC conduit medium grade of suitable size concealed in walls including taking down the existing complete all as specified and as directed. NOTE:- Two runs of 2.5 sq.mm cable, one run of 1.5 sq.mm earth continuity conductor and one run of PVC conduit shall be measured as one unit for payment purpose.

MCB DB, SPN 8 ways, 240 Volts, type IP-42 protection, factory made with tinned 200 Amps rated copper busbar, double door for housing MCBs including taking out old one all as specified and as directed.

MCB single pole 240 Volts, 5 to 40 Amps including taking down the existing un serviceable MCB complete all as specified and as directed.

MCB single pole 240 Volts, 5 to 40 Amps including taking down the existing un serviceable MCB complete all as specified and as directed.

Replacement of Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal)but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers lock nuts, saddles, pipe hooks etc of 20 mm external dia concealed in walls, ceiling floors etc for LAN / telephone point complete all as specified and as directed.

Replacement of PVC junction boxes ( 1 to 4 ways) suitable of 20 mm dia conduit all as specified and as directed.

LED batten light fittings, 20 watts, wall/ recess mounted with extruded aluminium heat sink provision, efficient heat dissipation and integrated electronic driver, industrial batten type, powder coated top cover, with bipin holders,connector block etc., complete all accessories internally pre wired all as per Havells cat No.LHEWEBP6IN1W020 or techno commercially equivalent makes specified in PS including connecting up twin core twisted flexible copper conductor cable all as specified and as directed.

LED batten light fittings, 36 watts, wall/ recess mounted with extruded aluminium heat sink provision, efficient heat dissipation and integrated electronic driver, industrial batten type, powder coated top cover, with bipin holders,connector block etc., complete all accessories internally pre wired all as per Havells cat No. LHECDIL7PP1W036 or techno commercially equivalent makes specified in PS including connecting up twin core twisted flexible copper conductor cable all as specified and directed.

Exhaust fan 230Volts, SP, 300 mm Sweep with BEE five star rating,high speed, heavy duty complete with Louvers, clamps with screws nut and bolts, including wire connections from ceiling rose to Exhaust fan complete with all accessories including writing of MES No with Unit Name on Exhaust fans using stencil with synthetic enamel paint all as specified and as directed.

36 Watt LED building security light fitting with pressure die cast housing, toughened glass and indivudial LEDs with secondary optics and IP 66 protection all as per Bajaj Cat No..Cat No.:- BRTFG 36W LED or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge not less than 1.5 m below ground level connected to earth lead by GI wire 4 mm dia by means of bolts nuts, check nuts, washers made out of galvanised iron connected to main switch all as shown in elect plate No 3 of MES SSR Part -I includingn excavation and earth work in any type of soil,funnel, 20 mm dia light grade GI watering pipe with chamber of PCC 1:3:6 type C1 40mm thick of size 450mm x450mm (1:2:4) type B1 for cover slab reinforced with 8mm dia TMT bars 10cm c/c both ways and with 6mm MS hook etc complete all as specified including testing on completion all as specified and directed.

Excavation in trenches in soft / loose soil not exc 1.5 metre wide not exc 1.5 metre in depth; for laying of cables not exc 10 Sqm on plan and getting out , trimming sides, forming bottom surface to required level complete all as specified and as directed. .

Returning, filling in, including spreading, levelling , watering and well ramming in layers n.exc 25 cm thick in soil all as directed .

Removing of excavated soil to a distance not exc. 50 m & depositing where directed at a level n.exc. 1.5m above starting point all as specified and as directed.

Sand cushioning in layers for cables in trenches / ducts for cable including consolidation complete all as specified and directed. NOTE: Punned thickness will be measured for payment purpose.

Sub-class 'B' well burnt bricks of old size 230 mm x 115 mm x 40 mm laid breadth wise along the length of cable laid in trenches for UG cable protection all as specified and as directed.

XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty ) with aluminium conductor 1100 volts grade cross-sectional area 25 sq.mm 3.5 core in trenches / ducts / through pipe / on pole / roads fixing to the poles through clamps and connecting up, testing and commissioning including taking down old unserviceable LT UG cables jointing and testing complete all as specified and as directed.

G K CONSTRUCTIONS

K. VENKATESH NAIDU

Sai Ram Builders

C R R CONSTRUCTIONS