CONSTRUCTION OF 11/0.4 KV, 250 KVA S/S AND 11 KV LINE FOR OUTDOOR ELECTRIFICATION OF AASRA YOJNA , MOHALLA REHMAT NAGAR, NAWAB MASJID, PANDIT NAGLA MORADABAD IN DEPOSIT SCHEME UNDER THE JURISDICTION OF E.U.D.D-III, MORADABAD

Safe carriage of material from Majhola Centre Store to work site including its loading and unloading.

11 Mtr. Long ST Poles.

09 Mtr. Long PCC Poles.

11 KV XLPE Cable 3x120mm

11/0.4 KV, 250 KVA Transformer.

LT PVC Cable size 3.5x240/120 mm

ABC Size 120x3+1x1.6mm².

11 KV/LT Line material.

Digging of pits & erection of 11 Mtr. Long ST Double Pole including fixing and fitting of all required accessories by providing M.S. Clamps Nuts & Bolts.

Digging of pits & erection of 11 Mtr. Long ST Single Pole including fixing and fitting of all required accessories by providing M.S. Clamps, nuts & bolts.

Digging of pits & erection of 09 Mtr. Long PCC Poles including fixing and fitting of all required accessories by providing M.S. Clamps, nuts & bolts.

Grouting of poles with cement, sand and Brick Ballast 300mm² in ratio 1:4:8 and making plinth above the ground level with muffing including back filling and proper ramming.

Fabrication and fitting of MS Channel/Angle including its cutting and making holes and then fixing on Poles. Complete work.

Grouting of stay rods (16x1800)mm² including all work of excavation cement concrete including back filling of soil etc.

Fixing, tightening and nozzeling of Stay wire with Stay Rod with the poles of required tension by providing of Stay Insulator of 11 KV and stay clamps.

Earthing of supports with MS Rod of size 20x2500 mm² long including excavation of pit and driving MS Rod 3.0M apart from support and 0.5M below the ground level and connecting below the earth electrodes with the help of G.I. Wire.

Construction of Transformer plinth of size 2x2x1.2 Mtrs. With the help of first class bricks and masonry in ratio 1:4 Cement and Coarse Sand filling the structure completely and 12mm thick plaster around the plinth 20mm thick, RCC layer on top with cement, coarse, sand and stone grit with MS Channel for resting the T/F wheel. All material shall be provided by the Contractor on his own cost.

Fabrication and erection of wire mesh fencing, grouting of fabricated MS Angle, painting of fencing and supports with all material, fencing shall be made of 50x25mm, 10 gauge rectangular type wire mesh. Complete work. All material shall be provided by the contractor.

Chemical earthing by providing chemical rod and chemical G.I. Strip 25x6mm attached the pipe with clamp. All material shall be provided by the contractor. Complete work for earthing of 250 KVA Transformer.

Safe shifting and installation of 11/0.4 KV, 250 KVA Transformer on plinth. Work complete in all respect.

Filling and fixing of 11 KV XLPE Cable Jointing Kit 3x120mm² Indoor and Outdoor.

Fixing and fitting of T-Off Channel by providing MS Clamps, Nuts & Bolts.

Fixing and fitting of Fuse Set on Double Pole by providing MS Clamps, Nuts & Bolts.

Laying, spreading and mounting of 11 KV XLPE Cable of size 3x120mm² on poles including its binding on poles. Complete work.

Laying, stringing and sagging of ACSR Dog Conductor in 11 KV line including its winding on all three phases. Complete work.

Laying, mounting of LT PVC Cable of size 3.5x240/120mm on poles. Complete work.

Laying, spreading and mounting of ABC Cable of size 3x120+1x95+1x16mm on poles with winding by fixing of all type of clamps

Fixing and fitting of Distribution Boxes (3 Phase) on poles for making consumers cable connections. Complete work.

Laying, spreading and sagging of G.I. Wire under 11 KV line for making jaal by fixing of cross lesses for making cage by providing and fixing of MS Clamps, Nuts & Bolts.

Providing G.I. Pipe 6” for inserting 11KV XLPE Cable for safety of cable on Double Meter pole by providing and fixing of MS Clamps, Nuts & Bolts.

Cosmic Enterprises