COMPOSITE GROOVED RUBBER SOLE PLATE(CGRSP) - DRG: (RDSO) RDSO/T-8747.

Special Eligibility Criteria

1. 1

   (a) Purchaser reserves the right to procure Bulk/regular/entire quantity from RDSO approved vendors eligible for bulk order as available on UVAM under RDSO Sub Item Id. 3100584002. (b) The status of the vendor (i.e. approved vendor) shall be reckoned as on the date of tender opening and not thereafter. However, cases of downgrading/removal/ suspension/ banning etc., after opening of tender, shall be taken into account while considering the offers. (c) The firms/tenderers who are not appearing in UVAM as Approved Vendors of nominated vendor/source approving agencies will not be considered for ordering. However, such firms willing to participate, are advised to approach the concerned Vendor Approving agency for getting their name registered as approved vendor in the vendor directory maintained in UVAM. Note: Vendor directories being maintained in other forms manual/online, if any, will not be considered.

   Document optional
2. 2

   THIS TENDER COMPLIES WITH PUBLIC PROCUREMENT (PREFERENCE TO MAKE IN INDIA), ORDER 2017- Revision Regarding issued by Ministry of Commerce and Industry order No. P-45021/2/2017-PP(BE-II) dated 16.09.2020. Tenders must furnish the information giving the percentage of local content. Pl refer to para 3.2 of Instruction to Tenderers and General Conditions of Tenders for Supply Contract version_25 dated 20/07/2026.
3. 3

   In terms of Railway Board letter no. 2015/RS(G)/779/5 (Vol.III)dated22.06.2020 and in keeping with the Public Procurement(Preference to Make in India) Order 2017 as amended time to time, it has been found that there is sufficient local capacity and competition in supply of the tendered item of required quality and therefore, public procurement of this tendered item is restricted to Class-I local suppliers only (Class-I local supplier means a supplier having local content equal to or more than 50percent). The vendors who do not qualify to be Class-I local suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class-I local supplier for the tendered item,participates in the tender, it does so at its own risk and cost and Railway shall not be liable for any loss or damage caused to the vendors.
4. 4

   Warranty Period: : The Warranty Period of the CGRSP shall be 300 GMT of GMT of service or 8 years from the date of supply, whichever is earlier as per the RB's letter no. 2004/TK- II/22/5/7, Dt. 22.10.2013 attached with this tender.

Check List

1. 1

   Have you quoted in the prescribed performa ?
2. 2

   Have you furnished the statement of deviations[preferably nil] ?
3. 3

   Have you quoted price on the basis of free delivery to destination, indicating the break up ?
4. 4

   Have you quoted delivery period correctly and precisely ?
5. 5

   Have you kept your offer valid for 30 days.
6. 6

   Have you submitted authenticated copy of the document authorizing the signatory to submit offer and commit on behalf of tenderers ?
7. 7

   I/we hereby agree to supply the offered goods at a quoted rates as per IRS conditions of contract 2025 and other terms & conditions specified in this tender.
8. 8

   Are you MSE tenderer and seeking exemption from EMD, if so, Have you submitted required credential for tendered item?
9. 9

   It shall be the responsibility of the tenderers to quote correct HSN number and corresponding GST rate. Have you checked HSN code and have quoted corresponding GST rate.

Commercial-Compliance

1. 1

   "Bidders must submit a certificate as per ANNEXURE-19 of "Instructions to Tenderers and General Conditions of Tender for Supply Contract (For Indigenous Tenders)" Amendment no. 25 dated 20/07/2026 along with the bid for compliance of OM dated 23.07.2020 of Department of Expenditure, Ministry of Finance. If such a certificate given by a bidder whose bid is accepted is found to be false, this would be a ground for immediate termination and further legal action in accordance with law."

   Document requiredConfirmation required
2. 2

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional
3. 3

   (i) The 'Class-I local supplier'/ 'Class-II local supplier' at the time of tender, bidding or solicitation shall be required to indicate the percentage of local content and provide self- certification that the item offered meets the local content requirement for 'Class-I local supplier'/ 'Class-II local supplier', as the case may be. They shall also give details of the location(s) at which the local value addition is made. (ii) The percentage of Local Content entered by the bidder in their techno-commercial offer for classification as a Class-I or Class-II Local supplier for the tendered item(s), in accordance with the Make in India policy, shall be deemed as their self-certification of local content. In addition to this, unless explicitly stated otherwise in the offer, the bidder's manufacturing plants and facilities shall be considered as the location(s) where local value addition is carried out for the tendered item.

   Document requiredConfirmation required
4. 4

   This tender is governed by the Purchase preference for the Make in India policy. As per the Government of India's Make in India policy, it is mandatory that the bidder shall give self- certification for local content in the quoted item (goods) at the time of tendering for tenders value more than Rs. 10 crores [Ref: Para-3.2.4 b(i) of instructions to the tenderers]. However, at the time of supply for all Contracts above INR 10 Crore, the contractor/ supplier shall be required to give local content certification, duly certified by cost/chartered accountant in practice. For cases where it is not possible to provide certification by Cost/Chartered Accountant at the time of supply, the supplier is permitted to provide the certificate for local content from Cost/Chartered Accountant after completion of the contract or at the time of submission of bill. In case the contractor/supplier does not meet the stipulated local content requirement, and the category of the supplier changes from Class-I to Class-II/ Non-local or from Class-II to Non-local, a penalty of 10% of the portion of the contract for which the stipulated local content requirement in not met, will be imposed. However, contract once awarded shall not be terminated on this account. Please note - The necessary certificate of local content must be signed with UDIN/relevant similar Nos. for statutory auditor or cost accountant, whichever is applicable. Documents without UDIN number shall be construed as non-submission of CA certificate, and 10% penalty shall be deducted from the bill.

   Document optionalConfirmation required
5. 5

   Micro/Small Enterprise (MSE) are eligible for benefit/preferential treatment as per para 3.0 of Instructions to Tenderers and General Conditions of Contract (for Indigenous Tender), therefore, such MSE firms must enclose the relevant documents as per the tender conditions. The bidders are also required to furnish "Udyam Registration Number" in their offer. If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub-contracts in execution of this tender that will be from Micro and Small Enterprise (in percent of order value), with further breakup of MSE owned by SC/ST. (Information will be provided in % terms with the following fields: Micro firm owned by SC, Micro firm owned by ST, Micro firm owned by Others, Small industry owned by SC, Small industry owned by ST, Small industry owned by Others).

   Document requiredConfirmation required
6. 6

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.

2. 2

   Delivery Period: No deviation from the Delivery Period stipulated in the tender is permitted.

3. 3

   Payment Terms: No deviation from the Payment Terms stipulated in the tender is permitted.

4. 4

   Bidders are reminded to carefully go through Para 35.0 of Instruction to Tendereres and IRS Conditions of Contract 2025 (included and uploaded along with the bid document) those pertaining to Code of Integrity, Misdemeanour and Penal measures. If two or more bidders are found to be sister concerns or affiliates (having common partner/director/promoter/ owner/holding company decision control etc.) the offers of all such sister concerns are liable to be rejected as per relevant provisions of Tender conditions. They are therefore earnestly urged to refrain from committing violation of code of integrity in general and conflict of interest and anti- competitive practices.

5. 5

   As a tenderer, we hereby confirm that we have gone through Para 35 of Instructions to Tenderers and IRS Conditions of Contract 2025, and do hereby confirm that none of our sister concerns or affiliates (having common partner/director/promoter/owner/ holding company decision control etc.) have participated in this tender.