Estimate for repair and renovation of Adampur rest house And Removal of silt debris from syphon at RD 215000 of Jalandhar Branch.

Amount

Finishing walls with exterior decorative cement based such as snowcem, robbiacem etc. two or more coats to give an even shade (inside quarters)

scraping © cement plaster (inside of quarters)

12.5 mm thick cement plaster 1:4

12.5 mm thick cement plaster 1:3 on floor (terrace)

cement rendering on plaster 1 mm thick

Factory manufactured flush door fixed in position iron hinges , etc( excluding the cost of any fittings other than specified above but including labour for fixing the same in position ( a ) commercial with elm or gurjan facing on both / sides laminated core and lipped edges:- (iv) 35 mm thick

Wire Gauge Imported teak wood door shutter without springs housed in chowkats. (30 mm thick)

Applying pink primer or aluminium priming coat on wood work including preparation of surface

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (b ) Glazing area above 0.09sqm (iii) 5 mm thick plate glass (INDIAN)

Providing and fixing in position on terrace ( at all floor levels) HDPE water storage tanks of approved make ( to the approval of Engineer in-charge) with cover with suitable loking arrangement and making necessaryholes for inlet, outlet over flow pipes but without fittings and base support for tanks (i) triple layer tanks

1.2 meter high G.I barbed wire fencing (a) 1.2 meter high G.I barbed wire fencing with 1.8 meter angle iron posts 40x40x6 mm placed every 3 meters centre to centre 0.6 meter below ground level , every 15th post , end post, corner post suitable strutted and provided with 9 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples , turn buckles etc. including oundation concrete 1:2:4 of size 0.30x0.30x0.75 m for each post complete as per technical clauses 808 of MORT&H specifications.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Painting two or more coats with synthetic enamel paint in all shades on old wood work or metallic or plastered, concrete surface to give an even shadeincluding rubbing down old paint.

First class burnt brick work laid in cement sand mortar 1:5 in first story upto 4 meter above plinth level.

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete (a) 15mm i/d

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect. (b)G.I. tank nipple 20mm i/d

Providing and fixing PHILIPS 25W LED STREET LIGHT

XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- (i) Overall size 6sq.mm (2Core) Un-armoured (On-Surface) lupesume =60mtr

providing and fixing in position Wire Gauge 22 gauge 12x12 mesh of (140 G gauge) at site of work.

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Painting new letters and figures of black synthetic enamel paint to an even shade

Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete (b) 20mm i/d Brass Ball valves

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ). (a) size 600 x 600 mm

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths).

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.

Providing and fixing in position 15mm C.P.Pillar cock foam flow of approved make (tothe approval of Engineer-in-charge)

Replacement of PVC insulated copperconductor single core FR cable (ISI marked)overall 1.5sq. mm, 1100volts grade to be laidin existing heavy gauge welded conduit pipe20 mm/25 mm dia (1.6mm thick) ISI Marked,recessed in wall etc., complete with powdercoated/anodized concealed metal boxes(1.6mm thick with Brass lugs) required forsuitable number of modules (Modularaccessories) for having Step type electronicfan regulators (two module) 100watts, bellpush, 6Amp. 2/3 universal socket (shuttered),16/20Amp. combined/ universal Socket(shuttered), 6/10Amp. Switches, 16/20Amp.switches with indicator etc. and covered withFrame Plate etc., PVC connector (For FanBox and Call Bell), PVC Bush, bonding toearth with PVC insulated copper conductorsingle core FR cable (ISI marked) 1sq. mm,1100volts grade (For 6Amp. wall socket &plug control point) and other petty materialetc. including the cost of above material,cutting and filling up of chases (withfinishing the surface):- a) Wiring fan point (With fan box)

B) Wiring light point

C) Wiring 16/20Amp. power plug control point

Making dewatering arrangement by pumping set 4'' *4'' (Tractor driven)

Earth work of silt clearance of channels and drains:- (a) Kassi work undressed involving an average horizontal throw up to 2 metres and average vertical lift up to 0.5 metres (b)Basket work with combined lead upto 7.50 metres undressed. (c) Dressing for sub-item (a) and (b) supra. (d) Extra for every 7.5 metres additional lead.

Any Other Item

THE SUKHAD LC CO OPERATIVE SOCIETY LTD