Repair to all type of wooden and steel furniture under GE NAMS at NAMS

Amount

CHAIR DINING (FD - 228, 279)

Taking out old unserviceable leg and supply and fixing the front leg of sheesham wood Ist class made to shape , joint fixed with bamboo pins and fevicol by making Tennon Groove joints all as specified and as shown in drg wrought on all sides including dismantling & removing of all unserviceable legs from the frame complete all as specified.

All as per Srl item No 2.1 above but rear leg complete

All as per Srl item No 2.1 above but side/back/front rail of seat

All as per Srl item No 2.1 above but stiffener of back

All as per Srl item No 2.1 above but stiffener to legs short/long

Removing of old stains by sand papering and preparing the exposed surfaces for polishing and applying new seina/burnt seina uniformally and applying two coats of french polish to obtain the required glossy finish complete all as specified (polish of furniture carried out at md accn/OTM)

CHAIR EASY (FD-223, 229)

Taking out old unserviceable leg and supply and fixing the front leg of sheesham wood Ist class made to shape , joint fixed with bamboo pins and fevicol by making Tennon Groove joints all as specified and as shown in drg wrought on all sides including dismantling & removing of all unserviceable legs from the frame complete all as specified.

All as per Srl item No 3.1 above but rear leg complete

All as per Srl item No 3.1 above but side/back/front rail of seat

All as per Srl item No 3.1 above arms

Removing of old stains by sand papering and preparing the exposed surfaces for polishing and applying new seina/burnt seina uniformally and applying two coats of french polish to obtain the required glossy finish complete all as specified

CHAIR WRITING (FD-250, 280)

Taking out old unserviceable leg and supply and fixing the front leg of sheesham wood Ist class made to shape , joint fixed with bamboo pins and fevicol by making Tennon Groove joints all as specified and as shown in drg wrought on all sides including dismantling & removing of all unserviceable legs from the frame complete all as specified.

All as per Srl item No 4.1 above but rear leg

All as per Srl item No 4.1 above but front/ side/back rail all as specified and directed

All as per Srl item No 4.1 above but back stiffener

All as per Srl item No 4.1 above but arms

Removing of old stains by sand papering and preparing the exposed surfaces for polishing and applying new seina/burnt seina uniformally and applying two coats of french polish to obtain the required glossy finish complete all as specified (polish of furniture carried out at md accn/OTM)

CHAIR WB (FD-285)

Taking out old unserviceable leg and supply and fixing the front leg of sheesham wood Ist class made to shape , joint fixed with bamboo pins and fevicol by making Tennon Groove joints all as specified and as shown in drg wrought on all sides including dismantling & removing of all unserviceable legs from the frame complete all as specified.

All as per Srl item 5.1 above but rear leg

All as per Srl item No 5.1 above but front/side/back rail all as specified and as directed.

All as per Srl item No 5.1 above but seat of plywood 6 mm thick commercial ply duly perforated as shown on drg and fixed with steel screw and as directed.

Removing of old stains by sand papering and preparing the exposed surfaces for polishing and applying new seina/burnt seina uniformally and applying two coats of french polish to obtain the required glossy finish complete all as specified (polish of furniture carried out at md accn/OTM)

TABLE WRITING (FD-249, 1116)

Material and labour for providing table top of size 1200mm x 600mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete including french polishing with one or more coats as directed and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engr-in-Charge.

All as per srl No. 6.1 above but leg of sheesham wood complete.

All as per srl item No. 6.1 above but side rail of sheesham wood complete

All as per srl item No. 6.1 above but stiffener of Sheesham wood complete.

All as per srl item No. 6.1 above but side box with drawer

All as per srl item No. 6.1 but brass lock

All as per srl item No. 6.1 but Knob for drawer

TABLE 900MM X 600MM X 760MM WITHOUT DRAWERS (FD-42, 55, 284)

Material and labour for providing leg of sheesham wood of table 900mm x 600mmm x 760mm including french polishing with one or more coats as directed and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engr-in-Charge.

All as per srl item No. 7.1 above but front rail of sheesham wood complete

All as per srl item No. 7.1 above but side rail of sheesham wood complete

All as per srl item No. 7.1 above but stiffener of Sheesham wood complete.

All as per srl item No. 7.1 above but table top of size 900mm x 600mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete Make : Novapan

TABLE DINNING FOR 6 PERSONS (FD-30,273,1115)

Material and Labour for providing table top of size 1500mm x 900mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete including french polishing with one or more coats as directed and also dismantling & removing of old unserviceable parts from the frame complete all as spfd and as directed by Engr-in-Charge.

All as per srl item No. 8.1 above but leg of Sheesham wood complete

All as per srl item No. 8.1 above but front or Rear rail of sheesham wood complete

All as per srl item No. 8.1 above but side rail of sheesham wood complete.

TABLE 900MM X 600MM X 760MM WITH DRAWER (FD - 41, 224, 286)

Material and labour for providing leg of Sheesham wood complete of table size 900mm x 600mmm x 760mm including french polishing with one or more coats and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engr-in-Charge.

All as per srl item No. 9.1 above but front rail of sheesham wood complete

All as per srl item No. 9.1 above but side rail of sheesham wood complete

All as per srl item No. 9.1 above but stiffener of sheesham wood complete

All as per srl item No. 9.1 above but table top of size 900mm x 600mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete all as specified and directed.

TABLE DINNING FOR EIGHT PERSON (FD-239,1115)

Material and labour for providing Table top of size 1800mm x 900mm, 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete including french polishing with one or more coats and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engr-in-Charge.

All as per srl item No. 10.1 above leg of Sheesham wood complete

All as per srl item No. 10.1 above front or rear rail of sheesham wood complete

All as per srl item No. 10.1 above side rail of sheesham wood complete.

TEAPOY (FD - 278)

Material and labour for providing Front or Rear leg of Sheesham wood complete of Teapoy including french polishing with one or more coats and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engr-in-Charge.

All as per srl item No. 11.1 above but front or Rear rail of sheesham wood complete.

All as per srl item No. 11.1 above but side rail of sheesham wood complete

All as per srl item No. 11.1 above but top of size 600mm x450mm made out of 18mm thick pre-laminated particle board exterior grade malamine faced, complete all as specified and directed.

TABLE PEG (FD-236, 277)

Replacement of old unserviceable top by fixing new 18/19 mm thick 450mm x 300mm pre laminated particle board exterior gradee amlamine faced ISI marked including provision of 3mm thick shisham wood edging all round complete as shown drgs and specied.

Replacement of old unserviceable leg with new shisham wood leg seasonably seasoned from free shakes and knots complete all as per drgs and as directed

All as above but top long rails

All as above but top short rails

Removing old stains by sand papering and preparing the exposed surfaces for polishing and applying new seina/burnt seina uniformaly and applying two coats of french polish to obtain the required golssy finish complete all as specified.

TABLE CENTRE (FD-29, 235 & 274)

Material and labour for providing front or Rear leg of Sheesham wood complete.of Table Centre including french polishing with one or more coats and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engr-in-Charge.

All as per srl item No. 12.1 above but front or rear or side rail of sheesham wood complete.

Table Top of size 900mm x450mm made out of 18mm thick pre-laminated particle board exterior grade malamine faced, complete all as specified and directed.

TABLE BED SIDE FD-210, 248)

M&L for back of back side made out of 6mm thick commercial Ply wood ISI marked complete.

All as per srl item No. 14.1 above but side made out of 12 mm prelaminated particle board melamine faced ISI marked complete.

All as per srl item No. 14.1 above but table top of size 380mm x 300mm made out of 12mm thick Plywood pre-laminated melamine faced, complete all as specified and directed.

All as per srl item No. 14.1 above but shelf made out of 12mm thick commercial plywood ISI marked complete.

Side Board (FD-112, 241 & 1112)

Material and labour for replacement of unserviceable top of side board of thickness 18/19mm pre laminated particle board exterior grade make National/Novapam/Signature) including tacking out the old part from the items as specified and directed by the Engr-in charge.

All as item No 15.1 herein before but shutter Door of 18/19mm thick pre laminated particle board exterior grade ,Fixed with 4mm thick TW beading all round. Including tacking out the old part from the item as specified and directed by the Engr –in- charge.

All as item No 15.1 herein before but shelf of 18/19mm thick pre laminated particle board exterior grade.

M&L for repairing /replacement of Drawer of side board made out of 18/19mm pre laminated particle board exterior grade along with fixing of fancy Knob to the drawer as specified and directed by the Engr-in charge.

M&L for fixing of 4mm teak wood beading in front of side board as required as specified and directed by Engr – in - Charge

M&L for repairing /replacement of old/unsv Ply wood 6mm thick fixed at rear portion of the side board complete as specified and directed by the Engr-in charge.

M&L for replacement of old/unsv Long rail made out of first class Indian teak wood well seasoned and free from Knots as specified and directed by the Engr-in charge.

M&L for replacement of old/unsv short rail made out of first class Indian teak wood well seasoned and free from Knots as specified and directed by the Engr-in charge

All as per item 15.8 herein before but old/unsv leg as specified and directed by the Engr-in charge.

M&L for scraping /removing of existing old polish by old knife or broken glass pieces and sand papering to make the surface smooth and all exposed surface shall be polishing with French polish of high glossy finish as directed by Engr -in - Charge

TABLE DRESSING GENTS( FD-230).

M&L for labour for box of table dressing gents shall be made out of pre laminated particle board 19mm thick with veneer face as shown on drawing over all size of box shall be 90-0mm long 300mm wide and 150mm high over which 20x40mm thick teak wood beading shall be fixed including tacking out the old/UNSV parts from Table dressing ladies as shown on drawing and as directed by Engr-in-Charge

All as per item Ser No16.1 above but two drawers equally spaced having 255mm in the middle . Front drawer shall be of 12mm thick pre-laminated particle board teak veneer face sides of the drawer shall be of 12mm thick teak plank running smoothly in the drawer .Thee bottom and back of drawers shall be 6mm thick ply wood commercial front face of shelves shall have 3mm thick teak wood edging as shown on drawing .

All as per item Ser No 16.1 above but two Nos of Knob shall be fixed to drawers

All as per item Ser No 16.1 above but supply & fixing of looking mirror of size 410mmwide and 790 mm high 5mm thick along with wooden frame of size 25x20mm thick made to the shape as specified and directed by the Engr-in- Charge (make of mirror – Atul/Swastik/Modiguard free from distortion and other defects.

All as per item Ser No 16.1 above but fixing of two supports of 25mmx35mmx1115mm teakwood batten on the back side of the mirror as shown on drg.

All as per item Ser No16.1 above but provide the 6mm thick plywood backing of mirror as specified and directed by Engr –in- charge.

All as per item Ser No 16.1 above but replacement of 3mm thick flat iron key plate of mild steel 25mmx25mmin section shall be provided at top of mirror as directed by Engr –in charge and painted with black paint.

M&L for scraping /removing of existing old polish by old knife or broken glass pieces and sand papering to make the surface smooth and all exposed surface shall be polishing with French polish of high glossy finish as directed by Engr -in - Charge.

CHAIR DINNING WITH CUSHION ( FD-E6/MAP/10)

Dismantling of un-serviceable rear legs and replacement the same with new well seasoned shisham wood legs and fixing the same in position & all as specified as shown on drg and as specified & directed.

All as per srl item No 17.1 here-in-before but front legs

All as per srl item No 17.1 here-in-before but side rails.

All as per srl item No 17.1 here-in-before but stiffeners

Replacement of cushion foam and rexene cloth of seat of the chair foam 32 density shall be provided as shown on drawing and directed by engineer in charge

Removing old stains by sand papering and preparing the exposed surfaces for polishing and applying new seina/brunt seina uniformaly and applying two coats of french polish to obtain the required golssy finish complete all as specified

CHAIR COMPUTER (FD -E6/MAP/01)

Supply & fixing adjustable back rest shall consist of droplift mechanism and shall be adjusted in the range of 65 mm and can be locked in 5 steps for better lumbers supports as shown infigures

Supply & fixing 12 mm thick hot pressed by plywood up holster(Seat) with fabric and moulded polyurethane foam as shown in figures

Supply & fixing the back foam shall be designed with contour lumber support for extras comfort with PVC lipping all round 510x470x60mm seat and back integral skin polyurethane reinforeced with MS insert. It shall scratch and water ressistance as shown in figures

Supply & fixing Pedestal Assy injection moulded in black in 30% filled in nylon A 10.5 mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the castors. It is 600 mm pitch centre dia as shown in figures

CHAIR TUBULAR WITH ARMS (FD-75)

Removing old seat bottom & supply & fixing of new seat of existing size of Ist class hard wood teak duly woven as per local pattern with 2mm thick plastic premium cane of superior quality and the seat shall be fixed to chair with 75 x 4mm thick machine screw with nuts & washers complete all as specified and directed.

Removing old back of chair & supply and fixing of new seat of existing size of hard wood teak duly woven as per local pattern with 2mm thick plastic cane of superior quality and the back shall be fixed to chair with 75x4mm thick machine screw with nuts & washers complete all as specified, and as directed.

Removing of arms rest & providing new arms of Ist class hard wood teak duly french polished & fixing the same to chair with screw & washer as per drg complete all as specified and as directed.

Supply & fixing of MS flat iron 25x5mm thick and 50 mm long bar welded to chair with conduit pipe at bottom of the seat & also screwed with the seat of two places duly painted with two coats of olive green synthetic enamel paint over a coat of red oxide primer complete all as specified,

Providing & fixing new hard rubber top shoes complete all as specified and directed.

Removal and scrapping of old paint & applying two coats of OG synthetic enamel paints over a coat of red oxide primer with brush painting as directed by Engineer-in-Charge

Table dressing Ladies

Supply and fixxing in position including hacking out of old broken mirror of table dressing lady of size 1200mm x 356mmx 5mm thick(make modi guard/saint gobain) approved by GE and fitted with frame of ist teat wook and 4mm thick commercial ply wood complete all as shown on drawing, as specified and directed.

DESK WITH SEAT 1200 X 984 X 859 mm

Dismantling of unserviceable top , bottem and side board of Desk and replacing the same with new top, bottom and side board made out of pre laminated board 18mm thick with 4mm thick teak wood edging including polishing complete all as shown on drawing and specifed

Removing old seat & supply & fixing of new seat of size 1200 X 300 X 25 mm Ist class Hard wood teak duly shall be fixed to chair with 75 x 4mm thick machine screw with nuts & Washers complete all as shown on drgs and specified

Removing old Back seat & supply & fixing of new Back seat of size 1200 X 300 X 25 mm Ist class Hard wood teak duly shall be fixed to chair with 75 x 4mm thick machine screw with nuts & Washers complete all as shown og drgs and specified

Removing of unserviceable MS Square pipe and supplying and fixing of new MS 25 square mild steel tube of wall thickness 1.6 mm including welding and applying 2 coats of synthetic enamel paint over coat of red oxide primer complete as all shown on drgs and as specified.

M/S NEW SUBBERWAL FURNISHERS

Kalia Construction Company

om parkash and sons

NAVEEN TRADERS

H.K.TRADERS