CA NO. GE AF NO.1 / GUR-39 / 2026-27REPAIR TO FLOORING, PLASTERING, TILING, MS WORK, UPVC JOINERY, ROOF COVERING AND WATER PROOFING AT OTHER THAN MARRIED ACCN, BSO YARD AND MES OFFICE PREMISES AT 54 ASP UNDER GE (AF) GURGAON NO.1

Demolition of brick work built in cement mortar including all qoins, arches, pillars, etc.complete all as specified directed ny Engr-in-Charge.

M&L for Brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified and directed by Engr-in-Charge

All as per srl item No. 2 here in before but except bricks . Note:- Serviceable bricks obatined from srl item No. 1 shall be re-used in srl item No. 3 after cleaning etc complete all as specified and directed by Engr-in-Charge.

M&L Gunitting work for RCC work as in columns, beam, slab, perapet, chajjas etc by removing all loose concrete on the reinforcement, cleaning the surfaces with wire brushes and reinforcement with sand papers than applying apoxy paint to rusted reinforcement and S&F welded wire mesh fabric size not less than 95x95x3 mm on the prepare surfaces and finally applying guniniting 30 to 40 mm thick (average thickness )with presure gun using 1 part of cement and 3 part of coarse cement incl necessary form work where ever required all gunnited surface shall be brought in complete geometric figure even in the guniting opration only complete all as specified and directed. Note:- Where new or additional reinforcement is required the same shall be paid for separetaly of this schedule as above.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L TMT bar mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed by Engr-in-Charge.

All as per item No 07 here-in-before but but 6mm to 8mm dia all as per specified and directed by Engr-in-Charge.

Taking down cement plaster, any description on brick walls or on concrete surfaces including racking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling on concrete surfaces, finished fair & even without using extra cement complete all as specified and directed by Engr-in-Charge.