REPAIR MAINT OF INTERNAL ELECTRIFICATION WORK INCL REPLACEMENT OF UNSV WIRING VARIOUS TYPE OF LIGHT FITTINGS FIXTURE SUBMAIN WIRING DISTRIBUTION BOARDS BLDG SECURITY LIGHTS INCL SUMMAR APPLIANCES OF OTM ACCNS AT OD SHAKURBASTI AND HIRANKUDNA AND

Amount

Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc including making good the disturbed surfaces to match with the existing complete all as specified and as directed

M&L for point wiring with single core FRLS, PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) drawing through existing conduit pipe including replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and as directedfor the following :-

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

One socket outlet 5 amps controlled by one switch on independent board

One bell point controlled by one bell push switch

All as per item No 2 above but wiring with 2.5sqmm copper wire and 1.5sqmm earth wire for socket out let 16 Amps on independent board complete all as specified and as directed

All as per item No 2 above but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 2.5 sq mm PVC insulated unsheathed copper cable as earth continuity conductor complete all as specified and as directed

M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories,GI metal flush box of 1.60 mm thick suitable for modular/conventional switches/sockets/fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :-

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

One socket outlet 5 amps controlled by one switch on independent board

All as per serial item No 5 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 1.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire complete all as specified and as directed.

All as per item No.5 above but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 2.5 sq mm PVC insulated unsheathed copper cable as earth continuity conductor

M&L for point wiring surface type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60mm thick suitable for modular/conventionalswitches/sockets/fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the following :-

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch

One bell point controlled by one bell push switch

One socket outlet 5 amps controlled by one switch on independent board

One socket outlet 5 Amps controlled by one switch on same board

All as per serial item No 8 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 1.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire complete all as specified and as directed.

S&F Switch piano flush type 5/6 Amps single pole one way 230 Volts complete

S&F Switch piano flush type 15/16 A single pole one way 230 Volts complete

S&F Socket Outlet 2 in 1, 3 pin 5 Amps flush type 230 Volt complete

S&F Socket Outlet 2 in 1, 3/6 pin 5 and 15 Amp flush type 230 Volts complete

S/F Bell push, flush type 5 Amps 230 Volts complete

S&F ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, socket size, humfree, AC, 230 volts, 100 watts complete

S&F ding dong bell, AC, 230 volts, single pole complete

S&F lamp holder, 230 volt AC, PVC / Polycarbonate type of angular shape with back plate suitable for batten fittings complete all as specified and as directed

S&F ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified and as directed

S&F modular switch 6 Amps, one way, one module 240 volts complete

S&F modular socket, 3 pin 6 Amps,240 volts, 2 module complete

S&F modular switch 16 A, 1 module,240 volts complete

S&F modular socket 6/16 A, 5 pin, 2 module, 240 volts complete

S&F modular fan regulator, step type, 120 W, humfree, AC, 230 volts, 2 module complete

M&L in repair for two single core (submain) PVC insulated cable with 4 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 1.5 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete all as specified and as directed

All as per above but with 6 sqmm and 4 sqmm as earth wire

S&F PVC insulated and sheathed flexible cable 3 core Multi-stranded copper conductor size 2.5 sqmm 1100 volt grade after taking out old unserviceable one including electric connection complete all as specified and as directed

BLANK

Supplying and laying in replacement or fixing or passing through pipe, 1100 volts grade PVC insulated aluminium stranded conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circuler for the following size of cables :-

BLANK

M&L for sub main wiring concealed with 10 sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable including 1100 V grade, drawn through& includidng rigid PVC Conduit pipe medium grade with 6 sqmm (nominal area) FRLS single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth point & taking down old UNSV sub main wiring complete all as specified and as directed

S&F in repair MCB DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete all as specified and as directed for the following no of way :-

S&F in repair loadline distribution box, TP & neutral, metal enclosure, 4 way, AC, 415 Volt, double dooor, IP 43, concealed type with suitable bus bar, neutral link, earth link suitable for MCCB 4 pole 63/100 Amps as incomer and MCB SP as out going complete all as specified and as directed

S&F in repair MCB DP/SPN, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete of following rating :-

BLANK

S&F in repair sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 'C' curve, 240 Volt complete all as specified and as directed

S&F in repair MCB SP 240 Volts, AC, 10 to 32 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete all as specified and as directed

Supply, installation & testing of Building common area panel including Contacto, Analog time switch, MCB rating 40 Amps suitable for 3 phase 415 volts and having over and under voltage protection relay to protect the contactor coil, outdoor with panel locking facility, wall/floor mounted type including necessary cable lugs and gland in repairs complete all as specified and as directed

S&F in repair MCCB, AC, fixed type, with breaking capacity 16 KA suitable for load line DB & connection complete all as specified and as directed of following rating :-

40 Amps rating,2 pole,230 volt

63 Amps rating,4 pole,415 volt

100 Amps rating,4 pole,415 volt

125 Amps rating,4 pole,415 volt

S&F in repair of 3mm thick plastic laminated sheet cover with brass screws, cup wahser and cutting of grooves for switchs, scoket and regulator etc complete all as specified and as directed for following sizes :-

Size 5"x5"

Size 5"x8"

Size 5"x10.5"

S&F in repair of switch piano, flush type, 5/6 Amp, single pole, one way, 230 volts complete all as specified and as directed

S&F in repair of socket outlet 2 in 1, 3 pin, 5/6 Amp, flush type, 230 volts complete all as specified and as directed

S&F in repair of switch piano flush type 15/16 Amp, single pole, one way, 230 volts complete all as specified and as directed

S&F in repair of socket outlet 2 in 1, 3/6 pin 5 and 15 Amp, flush type, 230 volts complete all as specified and as directed

S&F in repair of Bell Push, flush type, 6 Amp, 230 Volts complete all as specified and as directed

S&F in repair ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, socket size, humfree, AC, 230 volts, 100 watts complete all as specified and as directed

S&F in repair of modular switch 10 amps single pole one module, 230 volts

S&F in repair of universal moudlar socket ,10 Amps, 5 pin, 2 module, 230 volts

S&F in repair of modular switch 16/20 amps single pole one module, 230 volts

S&F in repair of modular socket 16/20 amps, 2 module, 230 volts

S&F in repair of modular bell push with indicator 6 amps, one module

S&F in repair of modular fan step regulator 120 watt 2 module , 230 volts

S&F in repair LED Bulkhead luminaire of polycarbonate housing and enclosed with acrylic diffuser IP-65 protection incl connection complete all as specified and as directed.

S&F in repair LED Post top lantern luminaire with die cast aluminium spigot, lid cover and clear acrylic cover 40 watt, 5700 K with IP-65 protection incl connection complete all as specified and as directed.

S&F in repair wall mounted LED batten with aluminium housing and initigrated electronic drive 20 watt fixture 4 feet provided for efficient heat dissipation with polycorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in repair of LED linear surface/ suspended fittings, extruded aluminium body with opal polycarbonate diffuser, 38 watt, 4 ft long, CCT 6000 K incl connection complete all as specified and as directed.

S&F in repair G-13, T-8 LED retrofit thermoplastic tube lamp 18w/20w driver inbuilt, single side connection type suitable for existing T-8 batten luminaire complete all as specified and as directed.

S&F in repair P-5, LED PLL Lamp, 18 watt, 230 volt for existing false ceiling G-11 base light fitting complete all as specified and as directed.

S&F in repair surface/ceiling mounted LED panel type of size 2ft x 2ft, 36W, 230V, 5700K complete with driver full window glarefree opal diffuser LED panel with CRCA powder coated white housing complete with all accessories required for connection and making good the disturbed ceiling complete all as specified and as directed.

S&F in repair LED flood/security light fitting of 60 watts with pressure die-cast aluminium housing complete with all accessories, fixing of fitting on wall with necessary fixing arrangement as required at site & connection complete all as specified and as directed.

S&F in repair LED energy efficient design flood light, 20 watt, 230 volt, with anti glare diffuser, IP 65 incl connection complete all as specified and as directed.

S&F in repair decorative wall mounting fixture with opal PC diffuser suitable for 10/12 watt LED Lamp, lamp holder, including 12 Watts LED bulb of 6500 K of B22 base capand all accessories pre-wired including connecting up complete all as specified and as directed

S&F in repair 5W LED T5 TL fitting (1 fit) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and as directed

S&F in repair 10/12W LED T5 TL fitting (2 fit) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and as directed

BLANK

S&F in repair PVC flexible twin twisted copper conductor cable multi strand of size 0.75 sqmm nominal cross section complete all as specified and as directed

Supply only PVC canopy for ceiling fan of any make/sweep as per existing sample as directed.

S&F (in replacement) LED Landscape bollard light 10 watt, 230 volt, inverted pyramid tripod type with soft 360 degree distribution ,IP65 protection and fixed on existing foundation all as specified and directed .

S&F in repair Cast Iron/pressed steel terminal boxes, 1.60 mm thick, 60mm deep for mounting switches, sockets, fan regulator, etc with 3mm thick plastic laminated sheet cover incl making good to disturbed surface to match with the existing complete all as specified for following sizes :-

100mm X 100mm square

175mm x 100mm rectangular

200mm x 250mm rectangular

S&F modular type GI metal flush box 1.60mm thick incl making good to disturbed surfaces to match with the existing complete for following modular type fixture :-

One/Two Modular

4 Modular

8 Modular (2 rows of 4 modular)

12 Modular (2 rows of 6 modular)

S&F modular white cover plate with frame for following sizes :-

One modular

Two modular

4 Modular

8 Modular ( 2 rows of 4 modular)

12 Modular ( 2 rows of 6 modular)

Supply, installation and connecting to electrical system in repair, LT distribution switch board panel cubical type for out door use, double door, with rigid hinges, door handles locking arrangement back side openable, compartmentalized design, bottom support by M.S channel 75 MC fixed in PCC (1:2;4) height 450mm from ground level, mounted on suitable PCC blocks, fabricated out of CRCA sheet 3mm thick, suitably spaced, totally enclosed in chamber for reception of 3 phase, 440 V, 50 HZ, AC supply including all connection with aluminum strips, internal wiring with suitable size (minimum 1.5 sqmm) of PVC copper conductor wire with lugs. Panel shall be effectively PVC gasketed and sealed, glands to be provided at cable entries, powder coated painting and sign writing for in/out going connections complete all as specified and as directed and comprising of following as under :-

4 Nos bus bar of high conductivity aluminium alloy, 3 Nos for phase (R,Y,B) rating 400 amp and 1 No for neutral rating 200 amp, mounted on DMC support with heat shrink sleeve - 01 set

MCCB 4 pole, 200 amp, 415 volts, 25 KA - 01 No ( Incoming)

MCCB 4 pole 100 amp, 415 volts, 16 KA - 04 Nos. (outgoing)

MCB SPN 63 amp, 240 volts, 'C' series,10 KA - 04 Nos (outgoing)

Indication lamp (R,Y,B), LED type - One set of three

Grouting of panel including PCC work

S&F in repair ventilating fan/exhaust fan, 230V, AC, with louver shutter etc complete and connection from ceiling rose to fan terminal incl cutting of hole at wall for required size and making good disturbed surface complete all as specified and as directed.Make- USHA/Havells/crompton/Khaitan/RR.

200 mm sweep,PVC body

300 mm sweep,steel body

450 mm sweep,steel body

S&F in repair wall mounting fan 400 mm sweep, adjustable, plastic blade grill for protection, pull cord control for speed and oscillation on-off, ABS body incl connection complete all as specified and as directed.make- Havells/khaitan/USHA.

S&F in repair pedestal fan 500 mm sweep with strong copper wound motor for better air delivery, smooth oscillation, superior low voltage performance, heavy base for stability, 3 speed control regulator, speed not less than 1400 RPM complete all as specified and as directed.Make - Havells/Khaitan/crompton.

M&L for dismantling of unsv C/Fan of any make/sweep, cutting and removing the old defective/burnt winding, cleaning the core of fan motor and rewinding the fan motor with super enamelled copper winding wire of same gauge with insulating material and varnishing the core assembly, drying the moisture content to get appropricate speed including replacement of defective parts like bush bearing, minor rubber parts, connectors, bolts, nuts and unsv flexible connection wire upto 1 metre length complete and reassembling after repairs and re-fixing its original position complete and re-assemble the same complete all as specified and as directed (Note :- The cost of copper winding wire is deemed to be included in the quoted rate)

M&L for dismantling of unsv exhaust fan of any make/sweep, cutting and removing the old defective/burnt winding, cleaning the core of fan motor and rewinding the fan motor with super enamelled copper winding wire of same gauge with insulating material and varnishing the core assembly, drying the moisture content to get appropricate speed including replacement of defective parts like bush bearing, minor rubber parts, connectors, bolts, nuts and unsv flexible connection wire upto 1 metre length complete and reassembling after repairs and re-fixing its original position complete and re-assemble the same complete all as specified and as directed (Note :- The cost of copper winding wire is deemed to be included in the quoted rate)

M&L (in replacement) factory made metallic fan blades of existing pattern, size and colour scheme for complete all as specified and as directed following type/ sweep of fans :-

Ceiling fan 1200 mm sweep

Ceiling fan 1400 mm sweep

Exhaust fan 300 mm sweep

Exhaust fan 400 mm sweep

S&F in repair factory made metallic louver shutter duly painted complete all as specified and as directed for following size of exhaust fan:-

300 mm sweep

450 mm sweep

M&L (in replacement) C/fan hanger clamp, heavy duty with rubber reel, nut bolt & split pin complete all as specified and as directed

S&F in repair capacitor 2.5/3.15 MFD suitable for fan complete all as specified and as directed

M&L in repair ball bearing suitable for any type/size/make of fancomplete all as specified and as directed

BLANK

Taking down carefully electric geyser of any type and capacity by disconnecting electric and water supply connection, opening nut, bolt, washer and replacing the defective parts and reassembling after cleaning and replacing defective parts and re-installing the same in original position and making necessary electric and water supply connection and testing complete all as specified and as directed (Note :- Spare Items shall be measured and paid seperately)

Supply only inner tank suitable for Recold CDR 25 Ltrs capacity or any make , vessel made of copper sheet 22 gauge, ISI marked all as specified and approved by Engr-in-Charge suitable for 25 ltr capacity

Supply only of Heating element suitable for Recold CDR 25 Ltrs or any make capacity geyser complete all as directed by Engr-in-Charge ( Make : Theeta/as per sample/ make of existing geyser)

Supply only thermostat suitable for Recold CDR 25 Ltrs or any make capacity geyser as per sample

Supply only PVC connection, heavy duty high pressure type suitable for hot water connection as per sample complete all as specified and as directed

Supply only PVC connection pipe with brass unions at both ends, 450mm long 15mm bore, heavy duty (for incoming cold water) complete all as specified and as directed

Supply only apparatus plate suitable for Recold CDR 25 Ltrs capacity geyser complete all as specified and as directed

M&L soldering/brazing inner copper tanks 25 liters with brass solder and refixing after testing the leakage complete incl replacement of insulating material (Glass wool) for 25 Liters capacity Geysers and replacement of rubber packaging ring heat resistsnt type all as directed .

M&L for taking down carefully window/split type Air conditioner 2/1.5 Ton capacity of any type/make from window/wall and removing front grills, air filters and cleaning, removing dust, washing and servicing with chemical wash of cooling and condenser coil and re-assembling the dismantled components and fixing to its original position complete all as specified and as directed.

M&L for servicing of water cooler 40/80 ltr capacity any type/make including disconnection of electric /water supply connectin and servicing with washing, removing dirt and fixing its original position including electric and water connection complete all as specified and as directed.

M&L for charging of refrigerant R-22 / R-410 or any other recommended refrigerant gas in 1.5/2 Ton window/split Air conditioner/ Refrigerator/ Deep Freezer/ Water Cooler any cap including detecting leakage and rectify the leakage with proper brazing and testing on full load complete all as specified and as directed

S&F in repair fan motor assembly of water cooler any cap of cooling capacity 40 to 60 ltr per hour including all accessories complete all as specified and as directed.Make- AUE/AE/Electra/khaitan/Aarti/Krishna/TMA.

S&F in repair fan motor kit assembly for 500mm sweep, single phase,not less than 145 watt, 230 volt, AC, 50 Hz, copper wound with three speed control and blade for desert cooler complete all as specified and as directed.make- Khaitan/crompton/GE.

M&L in repair copper tubing 1/2" dia with existing gauge for suction/discharge line of split air conditioner of 1.5 Ton/2Ton capacity including high quality puf insulation complete all as specified and as directed

All as per above but size 3/8" dia

S&F in repair of cromium plated brass push cock 15mm dia, ISI Marked, for water cooler complete all as specified and as directed

S&F desert/Air cooler of body size 25"x25"x32", made out of corrosion resistant, 18 SWG GI sheet duly powder coated paint with 500mm sweep copper wound fan motor kit of not less than 145 watt with metallic blade, ISI marked, 1400 RPM, 230 volt AC, tank capacity not less than 100 ltr, incl plastic submersible pumps, electronis fan regulator with P/switch, desert cooler to be fitted with 6mm thick plywood to cover the gap as required size at existing window and old/unsv desert cooler depositing in E/M Store yard complete all as specified and as directed. Make- JK classic/Decool/supreme/Kapsun.

S&F in repair plastic submersible pump suitable for desert cooler any size complete all as specified and as directed. Make- Khaitan/CG/Bajaj.

S&F desert cooler pad (set of three) made out of wood wool etc for desert cooler any size complete all as specified and as directed

S&F in replacement Motor single phase, 1/5 HP capacity for split type AC 1.5/2.0 ton capacity complete all as specified and as directed

S&F in replacement hermetically sealed rotary type compressor unit of capacity 1.5/2 T for split/window type AC and charging of adequate quantity of refrigerant gas and testing on completion complete all as specified and as directed. Make- Blue star/carrir/Kirloskar/Hitachi/Dakin.

All as per above but for water cooler of any capacity/make complete all as specified and as directed

S&F in repair indoor unit suitable for 1.5 Ton split AC with PCB, LCD with temperature remote controller, noise level not less than 50 db etc with all accessories complete all as directed (Make : Hitachi/LG/Voltas/Blue Star)

S&F in repair outdoor unit suitable for 1.5 Ton split AC including rotary type compressor, high EER, copper material condenser unit, eco friendly refrigerent etc with all accessories complete all as directed (Make : Hitachi/LG/Voltas/Blue Star)

S&F in repair electronic voltage stabilizer, single phase for upto 2 Ton air conditioner having I/O correction range of 160-280 volt complete (Make : Microtech/Blue Bird/V-Guard/Sinetrac)

Supply and laying in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following size (Note :- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid seperately) :-

10 Sqmm 2 core

16 sqmm 4 core

25 sqmm 3.5 core

70 sqmm 3.5 core

Excavation in trenches not exc 1.5 Mtr wide and n.exc 1.5 mtr in depth, getting out for electric cable complete in any type of soil complete all as specified and as directed

M&L for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover UG cable complete all as specified and as directed

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and as directed

Removal of excavated material not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meters above the starting point complete all as specified and as directed

Returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and as directed

M&L for earthing with Galvanised Steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using GI wire of size 4mm dia as earthing lead (upto the body of the equipment) by means of GI bolts, nuts, check nuts and washers and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete all as specified and as directed

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - Rs. 137252.00

NEETU TRADERS (INDIA)