REPAIRS TO SUNKEN FLOORS REPLACEMENT OF SANITARY FITTINGS INTERNAL WATER SUPPLY RAIN WATER PIPES FLOORING AND WALL TILING STEEL WOOD AND ALUMINIUM JOINERIES AND FALSE CEILINGS AND RELATED WORKS IN MD ORS OTM ACCN AT DIAT DU GIRINAGAR PUNE 411025

Amount

Dismantling single layer manglore pattern or simular tiles including ridge tiles or hip tiles in roofing, stacking servicable tiles properly for reuse and removing rubbish off the premises complete all specified and directed.

M&L for roof tiles Mangalore pattern interlocking at side joints, laid dry complete all as specified and as directed.

All as per serial item No.2 here-in-before but except tiles.

M&L for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar 1:6 etc complete all as specified and as directed.

Dismantiling of old unserviceable 2nd class hard wood clean sawn tile batten of any size spaced 30 cm centre to centre all as specified and directed.

S&F 2nd class hardwood clean sawn tile battens, cross sectional area exc 5 and n.exc 15 Sqcm spaced at 30 cm centres to centres fixed with nails complete all as specified and as directed. NOTE:Measurements shall be taken overall including both battens and spaces. Deductions shall be made only for openings exceeding 0.40sqm each.

All as per serial item No.06 here-in-before but except batten.

Dismantling wooden scantling of any size and position all as directed.

M&L for 2nd class hard wood, clean sawn, in scantling timber work all as specified and as directed.

All as per serial item No.09 here-in-before but except timber.

M&L for preparation of battens, any size and spacing and treated all over (measured overall on one side only, spaces not deducted) with two coats of creosote oil complete all as specified and as directed.

M&L Fibre board Eves/ Weather Boarding 12 to 20mm thick or Feather Edged 15mm to 20mm thick and fixed with 30mm Lap, complete as approved arch pattern any size and shape including taking down existing old u/s boarding complete all as specified and as directed.Make: V-Board(Visaka Industries Ltd)/Everest

Dismantling plain or corrugated steel sheeting , any gauge or any thickness, as in roof coverings complete all as directed.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

All as per serial item No. 14 here-in-before but except sheeting.

Dismantling structual steel work as specified and directed

S&F steel work in tublar truss/purlin Fe-410-W ( Gde-E-250) quality-A, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 all as specified and directed.

M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any approved colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.

Refixing 20mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as directed.

Refixing 15mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as directed.

S&F for 15 mm bore GI tubing 'medium grade' galvanised, with and including all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with and including all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

M&L cutting chases pinning in brick work for concealed water tubing etc. and making good to facings where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified and directed.

M&L for PP-R gate valves (brass insert) of 20mm bore complete including taking down old unserviceable valve all as specified and as directed.

M&L for PP-R gate valves (brass insert) of 25mm bore including taking down old unserviceable valve complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in roof padding and similar work all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down shutters of any description, area not exc.1 sqm each complete all as directed.

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.

Taking down shutters of any description, area exc.2sqm each complete all as specified and as directed.

S&F for pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed .

Material and labour for 2nd class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed .

Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed

Supply and fix for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces exc. 10 cm width or girth etc all as specified and as directed.

M&L for two coat of synthetic enamel paint over a coat of pink primer including preparation of new/old painted wood surfaces complete all as specified and as directed.

Supply and fix for factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 4mm thick moulded PVC sheet on the front face and 4mm moulded prelam colour PVC sheet on back face wirth wood free EPS, fixed in frame at site including all fittings complete all as specified and as directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

S&F for aluminium powder coated louvered ventilator suitably desigened for provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

S&F aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F in repair 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked, complete all as specified and as directed.

S&F in repairs 300mm long Aluminium sliding door bolts,extruded section, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.

S&F in repairs 200mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

S&F in repairs 150 mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

S&F in repairs butt hinges, 100mm size, mild steel cold rolled, medium weight complete all as specified and as directed.

S&F in repairs 75mm size butt hinges, extruded brass with mild steel hinge pin, bright polished and fixed type D-11 complete all as specified and as directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.

S&F in repairs 100mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed.

S&F in repairs 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F brass locks, cupboard, grade 1, 75mm size, 6 levers with duplicate keys with brass key hole complete all as specified and as directed. (Make- Godrej)

S&F in repairs for 300mm, mild steel, ordinary rat tail rod pattern spring (helical spring) including roller and roller plate complete all as specified and as directed.

S&F in repairs for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed

S&F brackets & end brackets curtain rod, decorative type,stainless steel as per sample kept in AGE B/R R&D Girinagar Pune office complete all as specified and as directed.

S&F in repairs for curtain rod of 25mm dia, decorative type,stainless steel complete all as specified and as directed.

S&F in repairs for floor door stopper of brass body and tongue with hard drawn steel spring of over all length of cover plate 150mm complete all as specified and as directed.

S&F in repairs for 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F in repairs for 10mm thick corner glass of size 250mm x 300mm with stainless steel decorative type railing on front face and fixed with 3 Nos 'D' type stainless steel brackets complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

M&L for double charged vitrified ceremic tiles 10 mm thick (square/rectangular) polished, area of each tile exc. 0.18 sqm not exceeding 0.36 sqm, in floor & skirting etc , laid over and including screed bed of 15 mm thick cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade complete all as specified and directed.

M&L coloured non skid ceramic tiles of size 300mm x 300mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed.

M&L coloured non skid ceramic tiles of size 400mm x 400mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed.

M&L coloured glazed ceramic tiles of size 300mm x 200mm x 7mm thick of colour as in dado/ skirting and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

M&L coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Demolition of stone/ block masonry, built in cement mortar including all quoins, pillars etc. complete all as directed.

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Material and labour for fly ash brick old size bricks masonry cement mortar (1:6) complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply and fix in repairs for PVC cabinet with looking mirror, single shutter of size 350mm X 450mm X 100mm complete all as specified and as directed. Make: Prayag/ Commander as approved

S&F in repairs cast iron Nahani trap, with grating of diameter of outlet 75mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed.

S&F in repairs for vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed.

S&F in repairs for vitreous china, squatting pan of 'Orissa' pattern, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and integral foot rests any pattern, including provision of lime concrete bedding, 10 litres capacity PVC low level flushing cistern, all internal fittings, inlet, outlet pipe connections etc complete all as specified and as directed.

S&F in repairs for 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including bracket complete all as specified and as directed.

S&F in repairs 15mm dia PVC connection 450mm long including PTMT check nuts etc complete all as specified and as directed.

S&F in repair for 15 mm bore bib taps chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15 mm bore pillar tap CP fancy type of make Prayag or equivalent complete all as specified and as drected.

S&F in repair for 15 mm bore chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe including wall flanges of make Prayag or equivalent complete all as specified and as directed.

S&F in repairs for CP 15mm dia stop cock with long shank and cup of make Prayag or equivalent complete all as specified and as directed.

S&F in repairs for 15mm dia CP angle cock of make Prayag or equivalent complete all as specified and as directed.

S&F in repairs for 15mm dia CP bib tap long body with flange of make Prayag or equivalent complete all as specified and as directed.

S&F in repairs CP shower rose round/square 125mm fixing with 15mm pipe of make Prayag or equivalent of Jaguar complete all as specified and as directed.

S&F in repairs for grating round/Square 100mm dia of PTMT (minimum weight 25gms) all as per Cat No.111of make Prayag or equivalent of Jaguar complete all as specified and as drected.

S&F in repairs for grating with waste hole 125mm dia of PTMT all as per Cat No.113 of make Prayag or equivalent of Jaguar complete all as specified and as drected.

S&F in repair CP Urinal spreader for fixing with 15 mm dia pipe, Make- Prayag or eqvt all as specified and as directed.

S&F in repairs spindel of brass of any size/ type and in any position complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F 50mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls complete all as specified and directed. (measured overall as fixed along along the centre line over fittings and accessories)

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls complete all as specified and directed (measured overall as fixed along along the centre line over fittings and accessories)

S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls complete all as specified and directed (measured overall as fixed along along the centre line over fittings and accessories)

M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specified and directed.

All as per item No 94 above but 110mm dia complete all as specified and directed.

M&L PVC (SWR) branch piece single (single ‘Y’) equal or unequal with oval access door suitable for 75mm bore pipe with access door complete all as specified and directed.

M&L PVC (SWR) branch piece single (single ‘Y’) equal or unequal with oval access door suitable for 110mm bore pipe with access door complete all as specified and directed.

M&Lfor PVC (SWR) vent cowl of 110mm dia complete all as specified and directed.

M&F 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Dismantling of stone slabs,cudappah, of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified.

M&L for Machine cut cudappah stone slab 20 to 25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed.

S&F in repair Vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete incl providing and fixing plugs, beddding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe.(exclusive of fixing supply pipe to flushing cistern, trap and waste pipe.Make Hindware/Parryware /Cera

S & F in repair CP health faucet for EWC chromimum plated make prayag or equivalent as approved quality complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks 1000 lts (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1 and dismantaling of existing water tanks all as specified and directed

S&F in repair rotational moulded polyethylene water storage tanks 500 lts (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1 and dismantaling of existing water tanks all as specified and directed

S&F in repairs 150mm size mild steel, ordinary rat tail rod pattern spring (helical door spring) with roller and roller plates including welding to angle iron plate or chokhats as required and as specified.

S&F PVC Horizontal Roller Blinds as per sample kept in GE office or design and pattern approved by GE all as specified and directed

S&F in repair Vitreous china Urinal, full stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including Cp Urinal spreader for fixing with 15 mm dia pipe complete all as specified.

M&L in repair 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.

M&L in repair 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.

M&L 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.

M&L 0.90mm thick white laminate type 1 with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.

Material and labour for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 3 Sq.cm but not exc. 6 Sq.cm complete all as specified and as directed.

S&F stainless steel hinge 50 mm long for cupboard shutter fixed with Self Tapping screws complete all as specified and as directed.

S&F 75 mm long stainless steel handles for cupboard shutter fixed with Self Tapping screws complete all as specified and as directed.

S&F in repairs for 12mm thick gypsum board false ceiling fixed to existing GI angles and GI tees, channels grid as in patches including finishing the surfaces with gypsum plaster to give fresh look leveling and applying two coats of distemper of bound over or coat of primer including dismantling the existing one complete all as specified and directed .

S&F in repair for 12 mm thick perforated particle board/tiles for insulation and accoustic purposes, 60cm x 60cm in size fixed with nails to timber frame work or with staples on snap grid including 4 mm dia. GI mild steel plain wire complete all as specified and directed. .

Demolition of cement concrete in floors and pavings exc.15cm & n exc 30cm thickness (below or above ground level).

M&L for roughening surfaces of old concrete floor of sunken portion by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3Kg/sqm complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 10mm thick in CM 1:4 on concrete surfaces finished even and smooth using extra cement mixed with and including approved water proofing compound @ 3% weight of cement and applying two coats of Roff Hyguard EX Rezone Chemicals or equivalent make complete all as specified and as directed.

M&L for PCC 1:5:10 type C-2 (using 40mm graded brick aggregate) lean concrete for filling sunken floor complete all as specified and as directed..

J D Contruction

M/S OMSAI ENTERPRISES

sagar construction