LIMITED TENDER BID FOR CONTRACTOR

MAIN ENTRANCE DOOR: P/F Entrance Glass Door made out of 6" x 1 ½” (40mm thk) fabricated with 19mm thick HDHMR / EDHMR Make (Archid, Century, Green) board of approved brand with specified 1mm thick Laminate Make (Archid,Century, Aica) shade for Top, Bottom, and Vertical rails; fitted with 8mm thick float glass, matching Laminate Make (Archid,Century, Aica) perimeter profile, complete with heavy-duty S.S. H-handle of approved design. Item includes P/F of heavy-duty floor spring of approved make with all essential fixing accessories, all complete to the satisfaction of the Architect / Bank's Engineer. Minimum openable shutter size: 3'-6'' (min width) to 4’-0” (max width) x 7'-0'' (height).

FIXED ENTRANCE: P/F Entrance Fixed Portion (except main door) made out of 6" x 1 ½” (40mm thk) fabricated with 19mm thick HDHMR / EDHMR Make (Archid,Century,Green) board of approved brand with specified 1mm thick Laminate Make (Archid,Century, Aica) shade for Top, Bottom, and Vertical rails; fitted with 8mm thick float glass and matching Laminate Make (Archid, Century, Aica) profile, all complete to the satisfaction of the Architect / Bank's Engineer.

WORKSTATIONS: LINEAR/ RUNNING COUNTER WITH FRONT GLASS (OPS COUNTER): P/F linear/running workstation of size 4’-0” x 2’-3” x 2’-6” height, constructed with 25mm thick HDHMR / EDHMR Make (Archid,Century,Green) board of approved make (Tesa / Century / Green / Archid) for the tabletop base and side supports, and front apron in 12mm thick HDHMR / EDHMR Make (Archid,Century,Green) board. Tabletop finished with 6mm/12mm thick premium Acrylic Solid Surface (Corian) top of approved make (DuPont Corian / LG Hi-Macs / Merino Hanex) with seamless joints and mitered edges. Includes a 3-drawer pedestal unit (1’-4” x 1’-8” x 2’-5”) in 19mm HDHMR / EDHMR Make (Archid,Century,Green) board with soft-close telescopic channels and locks (Hettich / Hafele / Ebco). All exposed surfaces (inner & outer) finished with 1mm thick premium Laminate Make (Archid,Century, Aica) (Century / Ayka / Archid) and 2mm PVC edge-banding (Rehau). Rate includes 12mm clear toughened glass (Saint-Gobain / AIS) of 1’-6” height on tabletop with diamond edge polish and S.S. 304 “D” brackets (Ozone / Hardwyn), plus an additional 1’-0” wide 12mm transaction glass fixed horizontally over low-height partition. Complete with Ebco heavy-duty keyboard tray, 18” x 9” CPU stand in 19mm Laminate Make (Archid,Century, Aica)d HDHMR / EDHMR Make (Archid, Century, Green) board, and wire managers, all complete to the satisfaction of the Architect / Bank's Engineer.

WORKSTATIONS: LINEAR/ RUNNING COUNTER WITHOUT FRONT GLASS: P/F linear/running workstation (Back Office Counter) of size 2’-0” width and 2’-6” height (without front glass and apron), constructed with 25mm thick HDHMR / EDHMR Make (Archid,Century,Green) board of approved make (Tesa / Century / Green / Archid) for the tabletop base and side supports. Tabletop finished with 6mm/12mm thick premium Acrylic Solid Surface (Corian) top of approved make (DuPont Corian / LG Hi-Macs / Merino Hanex) with seamless joints. Includes a 3-drawer pedestal unit (1’-4” x 1’-8” x 2’-5” per 4 Rft) in 19mm HDHMR / EDHMR Make (Archid,Century,Green) board with soft-close channels and locks (Hettich / Hafele / Ebco). All exposed surfaces (inner & outer) finished with 1mm thick premium Laminate Make (Archid,Century, Aica) (Century / Ayka / Archid) and 2mm PVC edge-banding (Rehau). Rate includes 12mm thick clear toughened division glass (2’-0” x 1’-6” ht) fixed vertically between adjacent tables with diamond edge polish and S.S. 304 “D” brackets (Ozone / Hardwyn). Complete with Ebco keyboard tray, 18” x 9” CPU stand in 19mm Laminate Make (Archid,Century, Aica)d HDHMR / EDHMR Make (Archid,Century,Green) board, and wire managers, all complete to the satisfaction of the Architect / Bank's Engineer.

Manager CABIN TABLE WITH CREDENZA (MGR): P/F Manager's Cabin Table (6’-0” x 2’-6” x 2’-6” ht) with integrated Side Credenza (4’-0” x 1’-6” x 2’-6” ht) as a single assembly. Main table carcass and sides constructed in 25mm thick HDHMR / EDHMR Make (Archid,Century,Green) board of approved make (Tesa / Century / Green / Archid), with a front apron in 12mm thick HDHMR / EDHMR Make (Archid,Century,Green) board fixed with decorative S.S. studs. Main tabletop finished with 6mm/12mm thick premium Acrylic Solid Surface (Corian) top of approved make (DuPont Corian / LG Hi-Macs / Merino Hanex). Credenza constructed in 19mm thick HDHMR / EDHMR Make (Archid,Century,Green) board featuring drawer units and openable shutters with premium soft-close hardware and locks (Hettich / Hafele / Ebco). All exposed internal and external surfaces finished with 1mm premium Laminate Make (Archid,Century, Aica) (Century / Ayka / Archid) and 2mm PVC edge-banding (Rehau). Complete with Ebco keyboard tray, Laminate Make (Archid,Century, Aica)d CPU stand (18” x 9”) in 19mm HDHMR / EDHMR Make (Archid,Century,Green) board, and cable grommets, all complete to the satisfaction of the Architect / Bank's Engineer.

PARTITION: 3" THICK LOW - HEIGHT (FULLY PANELLED): P/F 3" (75mm) thick fully paneled Low-Height Partition, 1.2m high, constructed with an internal framework of 16-gauge heavy-duty aluminum section (50mm x 50mm) at 60cm C/C both ways, rigidly anchored to floor/walls with 16-gauge cleats and metal screws. Framework clad on both sides with 12mm thick HDHMR / EDHMR Make (Archid,Century,Green) board of approved make (Tesa / Century / Green / Archid) finished with 1mm thick premium Laminate Make (Archid,Century, Aica) (Century / Ayka / Archid). All vertical/horizontal paneled edges highlighted with a 3” wide x 12mm thick profile/beading made of HDHMR / EDHMR Make (Archid,Century,Green) board finished in matching Laminate Make (Archid,Century, Aica) shade. Partition features intermediate accent panels of 8mm clear toughened glass or 1mm metal sheet mounted with a 1.5’ x 1.0’ white writable film (3M make only) using heavy-duty 3M double-sided tape. Inclusive of all precision routering/cut-outs for electrical/data conduits, complete to the satisfaction of the Architect / Bank's Engineer.

PARTITION: 3" THICK FULL - HEIGHT (FULLY PANELLED): P/F 3" (75mm) thick full-height partition constructed with an internal framework of 16-gauge aluminum section (50mm x 50mm) at 600mm C/C both ways, rigidly anchored to floor, walls, and ceiling slabs using 16-gauge cleats. Framework clad on both sides with 12mm thick HDHMR / EDHMR Make (Archid,Century,Green) board of approved make (Tesa / Century / Green / Archid) finished with 1mm thick premium Laminate Make (Archid,Century, Aica) (Century / Ayka / Archid). All vertical and horizontal paneled edges highlighted with a 3” wide x 12mm thick profile/beading made of HDHMR / EDHMR Make (Archid,Century,Green) board finished in matching Laminate Make (Archid,Century, Aica) shade (no paint/polish). Rate inclusive of flush door with matching Laminate Make (Archid,Century, Aica) on both sides, door frame (4” x 2’-6”), H-handle, door closer, hinges, and tower bolts. Measurement considered up to false ceiling height only, all complete to the satisfaction of the Architect / Bank's Engineer.

PARTITION: 3" PARTLY GLAZED PARTLY PANELLED – TYPE 1: P/F Full height Partly Glazed Partly Paneled Partition made out of 2” square aluminum pipe framework both ways at max 600mm C/C, clad on both sides with 12mm thick HDHMR / EDHMR Make (Archid,Century,Green) board of approved make finished with 1mm thick Laminate Make (Archid,Century, Aica) of approved make & shade. Upper portion fitted with 6mm thick clear float glass where wooden partition height is up to 3’-0” high, complete with matching Laminate Make (Archid,Century, Aica) finished profiles. Includes necessary electrical/data cut-outs and integrated glazed doors/frames complete with H-handle, door closer, hinges, and tower bolts. Measurement up to false ceiling height only, complete to the satisfaction of the Architect / Bank's Engineer.

PARTITION: 3" PARTLY GLAZED PARTLY PANELLED – TYPE 2: P/F Full height Partly Glazed Partly Paneled Partition matching specifications of Item 12 above, but featuring 10mm thick clear toughened glass inserts where the lower solid HDHMR / EDHMR Make (Archid,Century,Green) partition height extends up to 1’-0” high only, complete with Laminate Make (Archid,Century, Aica)-finished profiles, necessary electrical routing, integrated doors/frames with heavy-duty locks, closer, and hardware, all complete to the satisfaction of the Architect / Bank's Engineer.

PARTITION: 3" FULL HEIGHT UPS/ LAN - CALCIUM SILICATE BOARD: P/F full height partition made out of 16-gauge aluminum framing (50mm x 50mm) at 600mm C/C both ways taken up to ceiling slab. Framework clad on both sides with 12mm thick Calcium Silicate Board of approved make finished with POP punning and 3 coats of approved plastic emulsion paint. Includes precise routing for electrical conduits/fittings, all complete to the satisfaction of the Architect / Bank's Engineer.

STORAGE: FULL - HEIGHT (7’ High x 1’6” Deep): P/F Full Height Storage unit (45cm deep) constructed out of 19mm thick Exterior Grade MDF Board of approved make, with 6mm thick Exterior Grade MDF board for the back lining. Openable shutters fabricated in 19mm thick Exterior Grade MDF board, finished on both sides with 1mm thick premium Laminate Make (Archid,Century, Aica) of approved shade. Removable internal shelves to be in 18mm thick Exterior Grade MDF board finished with 0.8mm thick white Laminate Make (Archid ,Century, Aica) on both sides at 40cm spacing, with all edges neatly sealed using PVC edge-banding. Equipped with heavy-duty brass hinges, tower bolts, S.S. brush-finish handles, ball-catches, and centralized locks. All exposed internal and external surfaces must be 1mm Laminate Make (Archid,Century, Aica)d (no paint/polish allowed), complete to the satisfaction of the Architect / Bank's Engineer.

STORAGE: LOW - HEIGHT (4’ High / 2’6” High x 1’6” Deep): P/F Low Height Storage unit (45cm deep) constructed out of 19mm thick Exterior Grade MDF Board of approved make, with 6mm thick Exterior Grade MDF board for the back lining. Openable shutters in 18mm thick Exterior Grade MDF board finished on both sides with 1mm thick premium Laminate Make (Archid,Century, Aica) of approved shade. Includes removable shelves in 18mm thick Exterior Grade MDF board with 0.8mm thick white Laminate Make (Archid,Century, Aica) on both sides providing 2 shelves / 3 compartments at 40cm spacing, with PVC edge-banded sides. Complete with heavy-duty brass hinges, tower bolts, S.S. brush-finish handles, locks, and 1mm premium Laminate Make (Archid,Century, Aica), all complete to the satisfaction of the Architect / Bank's Engineer.

STORAGE IN PANTRY: WALL - HUNG (5'0 Length x 2’6” High x 1’3” Deep): P/F Wall-Hung Storage (33cm deep) made out of 19mm thick Exterior Grade MDF Board of approved make, with 6mm thick Exterior Grade MDF board for the back lining. Openable shutters in 18mm thick Exterior Grade MDF board finished with 1mm thick Laminate Make (Archid,Century, Aica) on both sides. Removable shelf in 18mm thick Exterior Grade MDF board with 0.8mm white Laminate Make (Archid,Century, Aica) finish on both sides, edges sealed with 2mm PVC edge-banding strips. Equipped with heavy-duty brass hinges, handles, and locks. All exposed inner and outer views must be 1mm Laminate Make (Archid,Century, Aica)d, complete to the satisfaction of the Architect / Bank's Engineer.

STORAGE IN PANTRY BELOW PLATFORM: P/F Storage below the pantry counter platform consisting of double openable shutters in 18mm thick Exterior Grade MDF Board, deep as per actual platform size, structured with a robust internal Exterior Grade MDF framework to secure the shutters. Removable shelf in 18mm thick Exterior Grade MDF board finished with 0.8mm white Laminate Make (Archid,Century, Aica) on both sides. All edges finished with 2mm thick PVC edge-banding. Includes heavy-duty hardware, locks, and 1mm premium external Laminate Make (Archid,Century, Aica) on all exposed surfaces, complete to the satisfaction of the Architect / Bank's Engineer.

CREDENZA UNIT / STORAGE (0.75m HIGH x 0.45m DEEP): P/F Credenza Storage unit (2'-6" Ht) constructed out of 19mm thick HDHMR / EDHMR Make (Archid,Century,Green) board of approved make, with 6mm thick HDHMR / EDHMR Make (Archid,Century,Green) board for the back lining. Drawers and openable shutters fabricated in 19mm thick HDHMR / EDHMR Make (Archid,Century,Green) board with 1mm thick Laminate Make (Archid,Century, Aica) for all exposed surfaces. Removable internal shelves in 19mm thick HDHMR / EDHMR Make (Archid,Century,Green) board with Laminate Make (Archid,Century, Aica) finish on both sides, edge-banded, spaced at 40cm intervals. Complete with heavy-duty soft-close channels, brass hinges, handles, and locks, all complete to the satisfaction of the Architect / Bank's Engineer.

BOARDS - 5' x 4' GLASS MAGNETIC WRITING BOARD IN TRAINING ROOM: Providing and fixing Magnetic Glass Writing Board 6mm thick with White Background, glossy stain-free surface, complete with special high-strength magnets, magnetic duster, and marker holder. Board to be securely fixed to the wall using heavy-duty S.S. spacer studs, complete to the satisfaction of the Architect / Bank's Engineer.

BOARDS - 4' x 3' GLASS MAGNETIC WRITING BOARD IN CABINS & MEETING ROOM: Providing and fixing Magnetic Glass Writing Board 6mm thick with White Background, glossy stain-free surface, complete with special magnets, magnetic duster, and marker holder. Board to be securely fixed to the wall using heavy-duty S.S. spacer studs, complete to the satisfaction of the Architect / Bank's Engineer.

BOARDS - 5' x 4' SOFT BOARD FOR MANDATORY NOTICES: P/F Soft Board paneling size 5’-0” x 4’-0” made out of 12mm thick high-density Soft Board covered with approved color (Celestial Blue) premium felt/cloth fabric, mounted over a rigid 6mm thick HDHMR / EDHMR Make (Archid,Century,Green) board backing core, complete to the satisfaction of the Architect / Bank's Engineer.

BOARDS - 4' x 3' SOFT BOARD PANELING: P/F Soft Board paneling size 3’-0” x 4’-0” made out of 12mm thick high-density Soft Board covered with approved color (Celestial Blue) premium felt/cloth fabric, mounted over a rigid 6mm thick HDHMR / EDHMR Make (Archid,Century,Green) board backing core, complete to the satisfaction of the Architect / Bank's Engineer.

LUSTRE PAINTING ONLY (2 COAT PRIMER + 3 COAT PAINT): Scraping the existing paint layers, leveling surfaces, filling cracks/crevices with POP putty, applying a single coat of specialized primer followed by 3 coats of premium Lustre Paint / Oil Paint of approved make & shade to all main walls, ceilings, windows, and structural boundaries as directed, complete to the satisfaction of the Architect / Bank's Engineer.

ROLLER BLINDS: Providing and fixing in position premium manual roller blinds of approved make, shade, and fabric density, mounted securely on an aluminum powder-coated guide rail framework with nylon operating cords, control mechanisms, and tensioners, complete to the satisfaction of the Architect / Bank's Engineer.

BOXING FOR CONCEALING AC PIPING: Providing and fixing 4” deep concealment boxing fabricated out of 12mm thick HDHMR / EDHMR Make (Archid,Century,Green) board over intermediate structural support runners, finished with 1mm thick premium white Laminate Make (Archid,Century, Aica) to match the ceiling/wall profile. Boxing must securely enclose copper refrigerant lines, insulation, communication cables, and drain pipes, complete to the satisfaction of the Architect / Bank's Engineer.

CEILING – GYPSUM BOARD: Providing and fixing in position suspended Gypsum False Ceiling utilizing a high-quality galvanized iron (G.I.) perimeter and suspension channel system anchored firmly via metal fasteners and screws. Clad with 12mm thick Gypsum Board of approved make, with joints seamlessly finished with POP putty, treated with 1 coat of primer and 3 coats of premium plastic emulsion paint. Vertical drops up to 4" included in rate, complete to the satisfaction of the Architect / Bank's Engineer.

CEILING – MODULAR: Providing and fixing mineral fiber ceiling tiles of approved make (Armstrong / Ecophon / AMF-Star or equivalent) with Microlook edge profiles, suspended over a Silhouette 15mm Black/White reveal grid channel framework system as per manufacturer's design criteria. Suspension rods and fasteners must be thoroughly secured to the structural slab overhead for absolute stability, complete to the satisfaction of the Architect / Bank's Engineer.

Providing coves in false ceilings as per design/drawings of patta size 75/100mm high , 150mm deep with 12mm gypsum board on base(to keep LED light strip) and cove wall(vertical) again of gypsum board 100mm high. (Item shall be painted in (asian velvet touch) Specified color & Shade and counted in running meter for measurement one time only. )

CHAIRS – Swivel (High Back): P/S High-Back Swivel Executive Chair featuring an M.S. structural framework, wrapped in high-density breathable black mesh with adjustable lumbar support. Seat constructed with 12mm thick molded plywood padded with 4” thick high-density injection-molded foam. Equipped with PU 2-way adjustable armrests, a heavy-duty 5-prong chrome base with anti-friction nylon casters, adjustable headrest, multi-position synchro-tilt mechanism, and a heavy gas-lift cylinder (Nilkamal Make-Alba, Silver Steel, or Featherlite), complete to the satisfaction of the Architect / Bank's Engineer.

CHAIRS - Swivel (Mid Back): P/S Mid-Back Swivel Staff Chairs matching the structural, mesh, base, and mechanical mechanism criteria of Item 30 above, but configured with a mid-back profile without a headrest assembly (Nilkamal Make-Alba, Silver Steel, or Featherlite), complete to the satisfaction of the Architect / Bank's Engineer.

3 - SEATER – VISITORS SEATING: P/S of Three-Seater heavy-duty metallic link reception sofa (Airport lounge type configuration), finished in high-grade chrome or silver powder coating, complete to the satisfaction of the Architect / Bank's Engineer.

2 - SEATER – VISITORS SEATING: P/S of Two-Seater heavy-duty metallic link reception sofa (Airport lounge type configuration) matching specifications of Item 32 above, complete to the satisfaction of the Architect / Bank's Engineer.

ENTRANCE / SHUTTER BOXING: Providing and fixing heavy-duty protective boxing around entrance rolling shutters/grills, fabricated out of 18mm thick HDHMR / EDHMR Make (Archid,Century,Green) board over a rigid framework, finished externally with 1mm thick Laminate Make (Archid,Century, Aica) of approved shade. Includes integrated, neatly edge-banded trap doors for easy shutter servicing, measured on actual aligned site dimensions, complete to the satisfaction of the Architect / Bank's Engineer.

COMPLAINT / CHEQUE DROP BOXES: P/S of wall/floor mounted drop boxes (size 2’-0” x 1’-3” x 0’-4”) fabricated out of 19mm thick HDHMR / EDHMR Make (Archid,Century,Green) board finished both internally and externally with 1mm thick Laminate Make (Archid,Century, Aica) of approved shade. Front face provided with precision cut-out slots and clear engraved nomenclature graphics, complete to the satisfaction of the Architect / Bank's Engineer.

ACRYLIC SANDWICH BOARDS: Providing and fixing clear Acrylic Sandwich informational display boards of size 2’-0” x 1’-6 joints, consisting of a dual-layered acrylic sheet arrangement held securely to the wall via four corner ½” diameter Stainless Steel spacer studs, complete to the satisfaction of the Architect / Bank's Engineer.

SLOTTED ANGLE RACKS: P/S of industrial heavy-duty Slotted Angle Storage Racks of size 3’-0” width x 7’-0” height x 1’-6” depth, featuring a multi-tiered configuration with reinforced structural steel angles and heavy-gauge shelves for the branch archive/store room, complete to the satisfaction of the Architect / Bank's Engineer.

GLASS SHELF FOR TROPHY: P/F decorative floating glass display shelves using 10mm thick clear toughened glass, 9” deep, featuring high-gloss diamond polished front and side edges, secured safely using heavy-duty designer S.S. brackets, complete to the satisfaction of the Architect / Bank's Engineer.

FROSTED FILM: P/F premium decorative privacy frosted film (Garware or equivalent approved make) applied precisely onto glass panels and partitions of cabins, conference rooms, and meeting zones as per architectural pattern/strip design, complete to the satisfaction of the Architect / Bank's Engineer.

MIRROR FOR WASHROOM: P/F heavy clear glass Washroom Mirrors of size 1’-6” x 2’-0”, featuring premium silver backing, high-gloss distortion-free glass, edge-finished, and mounted over a solid water-resistant backing frame, complete to the satisfaction of the Architect / Bank's Engineer.

ELECTRICAL CABINET: P/F surface or flush-mounted main electrical panel cabinet, 9” deep, constructed with a 19mm thick HDHMR / EDHMR Make (Archid,Century,Green) board carcass finished entirely with 1mm thick premium Laminate Make (Archid,Century, Aica) on all sides. Every openable shutter must be fitted with premium powder-coated aluminum louver ventilation grills of size 9” x 6”, complete with safety hinges and lock assemblies, complete to the satisfaction of the Architect / Bank's Engineer.

RUNNING DINING LEDGE FOR PANTRY: P/F Running Dining Ledge of size 1’-4” to 1’-6” width x 2’-6” height, constructed out of a robust 25mm thick HDHMR / EDHMR Make (Archid,Century,Green) board of approved make for the main ledge top and its vertical side supports spaced at 3’-0” to 4’-0” structural intervals. All exposed top and side views finished with 1mm thick approved colour Laminate Make (Archid,Century, Aica) with matched edge banding, complete to the satisfaction of the Architect / Bank's Engineer.

WRITING LEDGE: P/F Customer Writing Desk / Ledge of size 1’-0” width x 3’-6” height, constructed with a 25mm thick HDHMR / EDHMR Make (Archid,Century,Green) board of approved make for the writing top and vertical support carcass. Finished beautifully on all side and top views with 1mm thick approved colour Laminate Make (Archid,Century, Aica) of approved corporate color shade, complete to the satisfaction of the Architect / Bank's Engineer.

Laminate FINISHED PANELLING: P/F high-durability wall/column paneling utilizing an internal grid framework of 16-gauge aluminum sections (50mm x 25mm) spaced at 45cm to 60cm C/C, fixed securely with 16-gauge cleats. Framework clad with 12mm thick HDHMR / EDHMR Make (Archid,Century,Green) board finished with 1mm thick premium Laminate Make (Archid,Century, Aica) of approved shade, topped off with an integrated 75mm x 12mm continuous decorative HDHMR / EDHMR Make (Archid,Century,Green) band wrapped in matching Laminate Make (Archid,Century, Aica), complete to the satisfaction of the Architect / Bank's Engineer.

RUBBER MAT: Providing high-quality heavy-duty anti-slip commercial rubber floor mat (Solimo or equivalent approved brand), size 5'-0" x 3'-0", featuring an easily cleanable textured base for high-traffic thresholds, complete to the satisfaction of the Architect / Bank's Engineer.

FLUSH DOOR WITH FRAME: P/F heavy commercial Flush Door assembly including a premium 2nd class BTC timber frame of size 100mm x 50mm, with a 38mm thick solid-core readymade HDHMR / EDHMR Make (Archid,Century,Green) Flush Door shutter of approved make. Finished on both faces with 1mm thick matching Laminate Make (Archid,Century, Aica) of approved shade. Provided with mortise cylinder lock, heavy-duty door closer, 4 nos. of 5” brass oxidized hinges, and a sleek 12" S.S. brush-finish handle, complete to the satisfaction of the Architect / Bank's Engineer. Approx size: 2'-3" to 3'-3" width x 7'-0" height.

TROLLEY FOR THE PRINTER: Providing readymade, heavy-duty office mobile printer trolley of a premium branded manufacturer, featuring multi-tiered reinforced storage levels and heavy-duty smooth-swivel nylon casters with locking brakes, complete to the satisfaction of the Architect / Bank's Engineer.

DINING TABLE IN PANTRY: P/F free-standing or fixed Pantry Dining Table of size 5’-0” x 2’-6” x 2’-6” height, constructed out of an 18mm/25mm thick heavy-duty HDHMR / EDHMR Make (Archid,Century,Green) board carcass and top panel, finished on all exposed surfaces with 1mm thick Laminate Make (Archid,Century, Aica) of approved color and texture with hot-melt PVC edge banding, complete to the satisfaction of the Architect / Bank's Engineer.

Providing & fixing Lacquered glass 4 mm pasted on HDHMR panelling in a design pattern with adhesive as per design/ drawings & directions etc. complete to the satisfaction of the Architect /Bank's Engineer.

Providing & pasting wallpaper on HDHMR Panel as per design/ drawings & directions etc. with undercoat of putty and paint complete to the satisfaction of the Architect /Bank's Engineer.

Providing & fixing Charcoal panels (Out of 250x2750mm) on panelling with 4mm Hdhmr Ply on back in a design pattern with fevicol, headless nails as per design/ drawings & directions etc. complete to the satisfaction of the Architect /Bank's Engineer.Note: This item includes cutting, pasting, providing designer pattern as per drawing.

ACP Providing & fixing in position Aluminium Composite Panel (ACP) with framing of Aluminium Tube sections of min 2" * 1" and 20 gauge 2'-0" C/C both ways. Mirror screws to be used. Joints to be finished with Silicon based sealant. ACP thickness of 3mm minimum. Aluminium foil thickness to be min 0.25 mm., 2'-0" C/C both ways. ACP to be in 2' width panels or distributed equally. ACP thickness of 3mm minimum. (Alubond/ Alstone/ Alcobond) or equivalent ISI approved brands to be used. Shades to be as per bank's approval. Trap door will be 12 mm marine ply finished with ACP, complete as per instructions of Architect/ Bank's Engineer. Item includes scaffolding as may be required etc. complete as per site conditions. (Only front facia & Balcony Ceiling to be measured for payment.)

Dismantling brick/ concrete flooring & including dismantling door and window frames, i/c hold fasts, stacking at site, repairs of damaged walls with cement mortar/ plaster, stacking useful bricks/ bats, plants and tree etc. complete in all respects. Rates include supporting RCC slab with scaffolding, ballies etc, if required, during making door opening or removing wall; dismantling sanitary/ plumbing fixtures & stacking the same.Dismantling / Demolishing of exist jaal and wooden partition, removing strong room exist fixed door by hilting machine properly and excavation of floor upto 300mm deep, including stacking the usable material within premises as directed and carting away the debris to dumping ground complete as per instructions at site (Labour & Transportation will be arranged by the Contractor).

Particular

Distribution System.

S.I.T.C. Of 3 phase Vertical TPN 12way D.B. With following M.C.B./ M.C.C.B./

S.I.T.C. Of L.D.B.

S.I.T.C. Of single phase 16way with 1 no 30 milli Amp25 Amp DP R.C.C.B. As incomer,14No 6 Amp S.P. M.C.B. as outgoing With all wiring connections. And Blanking Plate.(Toilet & pantry S.B. to be on one MCB.

S.I.T.C. Of L.D.B - 2

S.I.T.C. Of single phase 12 way with 1 no 30 milli Amp25 Amp DP R.C.C.B. As incomer, 10 No 06 Amp S.P. Amp M.C.B. as outgoing With all wiring connections. And Blanking Plate.

S.I.T.C. Of single phase 8 way with 1 no 30 milli Amp 25Amp DP R.C.C.B. As incomer, 6+ No 6 Amp S.P. Amp M.C.B. as outgoing With all wiring connections.

S.I.T.C of R.P.D.B.

S.I.T.C. 6 way TPN DB with 100 MA & 40 Amp four pole RCCB - 1 No

U.P.S. D.B. (Output)

S.I.T.C. of 32/40 Amp DP M.C.B. In separate metallic box UPS I./P. & O./P for output 40 AMP MCB.(Double pole)

S.I.T.C. Of industrial plug sockets in metallic boxes with metal clad top and

S.I.T.C of 20A/16A D.P. MCB in separate metal box for Inverter O/P.

S.I.T.C. Of weather proof boxes IP 55 near outdoor units with 4pole 32AMP MCB for cassette A.C. units ( 3T AC)

S.I.T.C. Of weather proof boxes IP 55 near outdoor units with 3pole 25 AMP

S.I.T.C. of 125 AMP 4Pole MCCB. In metallic box near Meter At the output of Meter .

Sub- Mains Cabling & Wiring : For Lighting, Raw Power,& U.P.S. D.B.'s.

S.I.T.C. Of 4Core x 70 Sq.mm. XLPE aluminium armored cable with 2 x 16 Sq.mm. PVC wires(earthings) to be laid from branch METER With check nuts etc.D.B. Body to be earthed with double earth. Exact length to be measured

End termination of above cable with suitable Copper Lugs on both side of above wires.

S.I.T.C. Of 4 x 25 Sq.mm. F.R.L.S. Copper flexible wires in Rigid PVC conduit from main DB. To U.P.S. Input

S.I.T.C. Of 4 x 16 Sq.mm. F.R.L.S. Copper flexible wires in Rigid PVC conduit

End termination of above wires at both ends in UPS & D.B.'s

S.I.T.C. Of 5 x 10 Sq.mm F.R.L.S. Copper flexible wires in 19/20mm PVC conduit from main D.B. To Raw Power (body to be earthed) & UPS output to UPS output DB's()

End termination of above wires at both ends in D.B.'s

S.I.T.C. Of 5 x 4 Sq.mm. Copper flexible wires in 19/20mm. Medium gauge PVC conduit from main D.B. To Casette A.C.'s

End termination for above wires with pin types of copper lugs For Cassatte Acs

S.I.T.C. Of 3 x 4 Sq.mm. FRlS Copper flexible wires in 19/20mm. PVC conduit from main verticle D.B. To pantry 16A pts/1.00/1.5/2 TON cassette AC

End termination of above wires at both ends with copper lugs.

Light Point/Raw Power Point/UPS Point/Fan Point Wirings

Single Light points controlled by 6A switch.

two lights points controlled by one 6A switch

three light points controlled by 6A switch

four light points controlled by 6A switch

Wall fan/exhaust fan points with switch at plate

Raw Power + UPS Power & Pantry Points

S.I.T.C. Of 6Amp 5Pin universal sockets controlled by one 6A indicator switch complete with box & flush surface plate for RAW Power on workstations (above table area)etc. Wires to be drawn from Wire/cable manager/channel inside the workstation from underground metal box containing the conduits located below the work station. no surface conduits to be seen below workstations.

S.I.T.C. Of 3nos of 6A universal sockets controlled by one 16A indicator switch housed in a modular PVC switch box with recessed surface plates for UPS points on work stations.(3no sockets in box with surface plate will be below table . Only 16A control switch with recessed surface plate will be above table . Wires to be drawn from Wire/cable manager/channel inside the workstation from underground metal box containing the conduits located below the work station. no surface conduits to be seen below workstations. conduit junction boxes to be below table and not below chair.

S.I.T.C. Of 16 Amp 5 Pin universal sockets controlled by one 16 A indicator switch complete with box & surface plate for RAW Power on Work ststions..( socket in box with surface plate will be below table . Only 16A control switch with recessed surface plate will be above table . Wires to be drawn from Wire/cable manager/channel inside the workstation from underground metal box containing the conduits located below the work station. no surface conduits to be seen below workstations.conduit junction boxes to be below table and not below chair.

CIRCUIT WIRING : (Lighting)+UPS point +R.P.points

S.I.T.C. Of 3 x 2.5Sq.mm. Copper flexible wires in 19/20mm. Medium gauge PVC conduit laid on wall/above false ceiling /concealed as per requirement with all accessories etc. From D.B. To switch boards & from UPS O.P. D.B. To

S.I.T.C. Of 3 x 2.5 Sq.mm. Copper flexible wires in 19/20mm. Medium gauge PVC conduit laid on wall/above false ceiling /concealed as per requirement with all accessories etc. From main R.P.D.B. to R.P. points on work stations.

S.I.T.C. Of 3 x 4 Sq.mm. Copper flexible wires in 19/20mm. Medium gauge PVC conduit laid on wall/above false ceiling /concealed as per requirement with all accessories etc. From main R.P.D.B. to R.P. points to pantry/ water

Light Fixtures:

S.I.T.C. Of 18 watt LED down lighting fixtures at work stations

S.I.T.C. Of 12 watt LED down lighting fixtures in passage

S.I.T.C. Of 6 watt LED down lighting fixtures in passage

S.I.T.C. Of 24 watt 2x2ft LED fixtures

S.I.T.C. Of wall mounted Fan Steel Body

S.I.T.C of exhaust fans ( 300 MM dia)

S.I.T.C. Of 20 watt LED tubelight fixtures

LED Strip for cove lighting 15 W per 5 M with driver and necessary installation supporting fittings of Led strip light (5 mtr.) make as specified in tender document or approved by BANK/ Architect.

Fire & Securtiy Systems

S. & I. Of 4" x 4" red danger mark sticker 230 Volt/440 Volt etc. To be fixed

S. & I. Of 4.5 Kg CO2 Fire Extinguisher.The Fire Extinguisher to be provided of

S. & I. of 4 Kg ABC Fire Extinguisher.The Fire Extinguisher to be provided of

Earthing System:

S.I.T.C. Of copper plate(600mmx600mmx3.15mm) type earth pit as per I.S.3043. concrete chamber with mettalic cover, funnel for adding water and

S.I.T.C. Of 2nos 16 Sq.mm. FRLS PVC copper wires in 19mm rigid PVC conduit from earth pit to UPS output D.B. Making tight connection with spring & ring washers in both earth pits and both end of MCCB box in meter room

S.I.T.C. Of heavy gauge G.I. Pipe type earth pit as per I.S. 3043 and with above accessories (i.e. Concrete chamber with metallic cover, watering gunnel etc.) must be provided.

S.I.T.C. Of 1nos 4 Sq.mm. FRLS PVC copper wires in 19mm rigid PVC conduit from copper plate earth pit to UPS output D.B. Making tight connection with spring & ring washers in both earth pits and both end of MCCB box in meter room

Cutting/Chasing of floor of Follwing sizes for laying of Conduits as per site

6" x 3" thk size

4" x 3" thk size

S.&I. Of Metallic Boxes with Steel Surface Plates fixed with Steel Screws

12" x 12" size

6" x 6" size

S.&I. Of U-PVC Trunking with cover plate & other accessories. Legrand/Precision Make

S.I.T.C. Of 80 x 50mm DLP U-PVC trunking system with all accessories

S.I.T.C. Of 32 x 20mm DLP U-PVC trunking system with all accessories

Miscellaneous Items

S.I.T.C of call bell Point with Call bell

Light Point With Timer for Branch Signage

Units

Volta's, Carrier , Blue-star, ETA Vestar,Only one of these Makes to be quoted. (A.C.'s installed should have a service centre in nearby area).

Supply, installation, testing and commissioning of a Ceiling mounted "Cassete" Air- Conditioner by cutting false ceiling and comprising of indoor and outdoor units. The indoor unit comprising multi-row DX cooling coil, Drier, expansion valve, air blower driven by motor with mounting accessories. Outdoor unit will comprise the rotory/ scroll compressor, condenser coil & fan, cordless remote controller etc. including Refrigerants gas charging etc. Indoor Evaporator & Outdoor condensor coils should be of Copper & not Aluminium.

4 ton Ceiling mounted "Cassete" Air-Conditioner

3 ton Ceiling mounted "Cassete" Air-Conditioner

2 ton Ceiling mounted "Cassete" Air-Conditioner

S.I.T.C of 3 star 1.0 ton capacity high wall mounted split A.c. Comprising Indoor and outdoor units. Indoor unit comprising Multi row Dx cooling coil., expansion valve, drier, motor driven air blower with metallic frame etc. Outdoor unit will have Rotory/Scroll, compressor, condenser coil, fan ,cordless remote control unit ,etc. Including refrigerant gas charging.

S.I.T.C of Stabilisers with suitable input voltage and output to be 230/415 V suitable for

1.0 TR Hi wall Unit 230 volt Stabiliser (3kva)

1.5 TR Hi wall Unit 230 volt Stabiliser (4kva)

S.I.T.C. of 19 mm dia & 16 mm dia Copper Refrigerant Pipes with Foam insulation between Indoor & Out door units.with breaking of wall wherever required for 2-3-4 Tr Cassette Air

S.I.T.C. Of 12.5 sq.mm. & 6.25sq.mm. Dia. Copper refrigerant pipe with foam insulation between indoor and outdoor units with breaking of wall for making hole whereever

S.I.T.C. Of copper conductor flexible cable between indoor and outdoor unit through holes

S.I.T.C. Of copper conductor flexible cable between indoor and outdoor unit through holes

S.I.T.C. Of 19/25 mm. PVC conduit pipe to be used as a drain water pipe .Through holes as

S.I.T.C. of Automatic Digital Timer For UPS and Server Room AC With 4/8/12 hr operation

S.I.T.C. Ac outdoor MS stand to be hanged from wall on Balcony with MS angle frame including railing etc. complete with primer and painting.

S.I.T.C. of an ultra-compact, slim-profile concealed automatic Condensate Removal / Drainage Pump of approved make (Aspen Mini Aqua / Little Giant / Wipcool), specifically engineered to be hidden completely from view within false ceiling voids, architectural wall trunking, or directly inside the rear chassis of the indoor AC unit carcass where gravity drainage is constrained. The unit shall feature advanced electronic probe water sensor induction technology (replacing mechanical floats to avoid sticking), thermal overload protection, dynamic anti-overflow safety cut-off terminals wired to isolate the AC unit during blockages, and an acoustic vibration-dampening mounting kit to ensure completely silent operation (noise levels below 21 dB(A)). The rate shall be inclusive of all power cabling integration, premium flexible internal suction and discharge connection piping, rigorous safety check testing, and necessary fully concealed layout routing behind architectural surfaces, all complete as per engineering design drawings and to the satisfaction of the Architect / Bank's Engineer.

Each vendor to specify the make of A.c. They propose to supply .

Common drain Pipes of cassette/Split A.C.'s be terminated in any toilet Nahni traps OR else be terminated external wall upto ground.

All Rates to be stated in figures & words & Total at the end.

Description

4 Pair UTP Cat 6, Cable (305M BOX)

2 Pair Telephone Cable (100M BOX)

Cassing & Conduit (PVC) 25 MM For Telephone & 32 MM For LAN

Patch Cords - 2 meter

Patch Cords - 1 meter

Quad Face Plate with Back Box For No. of 2 D + 2 V points

Dual Face Plate with Back Box For No. of 1 D + 1 V points

Single Face Plate with Back Box For No. of 1 D or 1 V points

Cat 6, 48 Port Loaded Jack Panel

Cat 6, 24 Port Loaded Jack Panel

Networking Rack (16 U with 15 PDU, Cable manager, Fan,

Networking Switch(24 Port - UNMANAGED )

Networking Switch(48 Port - UNMANAGED )

MDF Krone Box with Krone

Telephone ( Jelly) (50 pair) Cable from Service provider Krone Box to floor krone Box

Testing & Documentation Charges including submitting

Per Data Point Installation Charge

Per Voice Point Installation Charge

Fixing of Cassing & Conduit -25mm PVC