REPAIR TO PATH JOINT FILING AND MISC B/R WORKS AT TECH AND ADM AREA OF 25ED AF STN DEOLALI

Amount

Material and labour for raking and taking out the sealing compound from existing old joints of pavements/ hard standing with raker to full depth as directed and cleaning the joints by means of compressed air and filling back joints as described hereinafter including disposing off the old materials to a distance exceeding 100 metres and not exceeding 200 metres complete: (a) Joints shall be of any width n Exc 50 mm wide and 40 mm deep (b)Priming the side and bottom of joint with suitable primer as per manufacturer's instructions and filled with bituminous sealing compound of Grade A or equivalent sealing compound of deep 40mm conforming to BS:5212 and laying masking tape on edges of joints complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the debris off the premises

Removal of debris obtained from demolition/dismantling upto 5km distance to outside MD land complete all as specified and as directed

S&F SFRC cover of size 1200mmX600mmX75mm thick with edge protection MS flat 75mmX5mm of load bearing capacity 5 to 7 MT including handle, bar etc complete all as specified and as directed

M & L for 100mm thick Plain Cement concrete 1:3:6 type C-2 (using 40 mm graded broken stone aggregate) as in sub base, sub floors

M&L for 100 mm thick cement concrete type B-2, 1:2:4 (using 40mm graded aggregates) as in path/PCC road/hardstanding and PCC should be laid in alternate ways and the area of one panel should not be exc 10 Sqm/each and finishing the surface of concrete roads/paths/hardstanding by brooming all as specified and directed by Engineer-in-charge.

M &L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A'.

Sand filling under floors or in foundation including watering and consolidation.

M&L Machine pressed precast concrete interlocking paver block any shape and size made of grey cement and no pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

M&L for Providing Cement concrete 1:2:4 Type-B1(using 20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs ,back filling of PS frame, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed (including necessary form work) complete all as specified and directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, dismantling of existing float valve & re fixing the same after cleaning the water tank, capacity of tank exc. 250 ltr but n.exc 500 ltrs. complete all as specified and as directed

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, dismantling of existing float valve & re fixing the same after cleaning the water tank, capacity of tank exc. 500 ltr but n.exc 1000 ltrs. complete all as specified and as directed

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed by Engg. In charge.

S&F in repair 3mm thick sheet glass ordinary quality and size in any type of frames and glazing with oil putty (or beading) in square n.exc. 0.5 Sqm each including hacking out old broken glass from wooden/steel frames complete all as specified.

Dismantling ceiling boarding of any description fixed in any position with nails incl cover fillets/aluminium snap grid.

S&F Anodised aluminium snap grid frame work size 605x605 mm for false ceiling incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long all as specified & directed by Engr -in-charge

M & L Non asbestos fibre cement building boards 4 mm thick (one side embosed design), fixed or laid/ inserted to Aluminium grid frame work in ceiling with clips all as specified and directed.

Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 20mm bore. complete all as specified and as directed

M&L GI tubes medium grade 20mm bore fixed complete to wall or laid in floor. complete all as specified and as directed.

Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 15mm bore.

S & F GI tubing 15 mm bore medium grade with all fittings & fixed complete to walls or laid in floors.

Dismantling water storage tank 500 ltrs & n.exc. 1000 ltrs all as specified

Fixing only Rotational moulded polyethylene water storage tanks of 1000 ltr capacity (cylinderical verticla with closed top ) hoised and fixed in position all as specified in SSR part I

Fixing only in repairs ball brass valves with brass rod, high pressure with polythelene float and fly nut complete, screwed for iron pipe or for brass ferrule of 15 or 20mm dia.

Fixing only in repairs 15 or 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed.

Fixing only in repair Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed in repairs of complete all as spd and directed.

Fixing only in repair pillar taps, Cast Copper alloy, with capstan heads, chromium plated, fency type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.

Fixing only in repair stop cocks 15 mm bore, chromium plated , fancy type screwed down , high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions .

Fixing only in repair wash hand basins, vitreous china( flat back) white of any size including cutting for and pinning in ends of brackets or erecting stand including waste coupling fitting, brass chromium plated 32 mm size with long screwed shucks and fly nuts and including PVC discharge pipe as specified.

Fixing only in repairs 10 liters PVC valveless symphonic action type flushing cistern high/low level, white complete with inlet, ball valve, float and handle including brackets and telescopic down pipes and joint with WC complete.

Fixing Only in repairs PVC connection 15 mm bore size with PTMT nuts and PVC washers of length 450 mm.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars but excluding precast concrete articles etc all as specified & as directed by Engr-in-Charge.

M & L for brick work with sub-class `B' bricks old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6.

M& L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement mortar 1:6

M& L for Raised pointing in Cement mortar 1:4 to random or polygonal rubble, un coursed or brought upto courses

Taking down cement plaster of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete.

M & L for rendering 15 mm thick in CM 1 :6 on fair faces of brick work or concrete surfaces and rendering is to be finished even and smooth faced plaster all as specified & directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer all as specified & directed by Engr-in-Charge.

M&L for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brick work in CM (1:4) finishing the surface even and smooth faced plaster on walls all as directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer all as specified & directed by Engr-in-Charge

M&L for 50 mm thick Cement concrete 1:3:6 type C1, (20 mm graded aggregate), as in plinth protection, finishing cement concrete surface even and fair without using extra cement complete all as specified.

Taking down carefully exsiting bitumen tar felt including plaster/exsiting PCC padding, wire brushing and cleaning of the surface of Roof,terraces including flashing and junctions of parapets/kerbs walls etc and removing the rubbish to a distance exc 500m but n.exc 1.50 km and depositing where directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded crusher stone aggregate mixed with integral water proofing admixture @ 200 ml per bag of cement I,e Shali plastLW+ or STP No-1 or equivalent as in roof/roof kerb/cover concrete to water proofing finished even and smooth with out using extra cement complete all as specified and as directed by Engineer-in-Charge. (WPC shall be measured and paid separately).

M&L for Rendering 10mm thick CM 1:3 on concrete surfaces finished even and smooth using WPC liquid of Make Dr. Fixit or STP as per manufacture instruction @ 0.200 ltr in 50kg of cementcomplete all as specified and as directed by Engineer-in-Charge. (WPC shall be measured and paid separately).

Supply only liquid water proofing compound

M&L for cleaning the newly plastered surface thoroughly with wire brushes and providing water proofing treatment all as specified here in after :- (a) Bituminous primer @ 0.30 liter per SqM confirming to IS 3384-1986. (b) 3mm thick APP polymeric mambrane minimum weighing 3 kg/sqm of M/S TEXSA Ltd or M/S TIKI Asphalt hydro stop or IWL 3 Kg/Sqm membrane (one layer) laid by torch application method with overlaps of 100mm joints of traverse direction and 75mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of company. (c) Painting With one coat of bitumin grade 85/25 @ 1.2 Kg/Sqm. (d) Applying two coat of bituminous aluminium paint @ 200ml/sqm.

Dismantling of Single layer Mangalore pattern or similar tiles in roofing all as completed.

M &L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry all as completed

Fixing only Roof tiles, Mangalore pattern, interlocking at side joints, laid dry all as completed

M&L or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 all as specified

S&F for 15 mm thick Second class hardwood Boarding, with nails in any situation (except flooring and skirting)

M&L for timber framed and fixed Second class hardwood in scantling

Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified & directed .

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed

M&L reinforced cement concrete 1:2:4 (20mm graded aggregate ) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases)

Use & waste of form work to faces of walls, retaining walls, abutments, parapets and similer work including pillaster , buttress etc ; verticle or to batter.

M/S KANNANS (BID ID -3342746)

Vinod Enterprises (BID ID -3343965)

SHREE SAMARTH SERVICES (BID ID -3343651)

shubham Enterprises (BID ID -3342345)

M/s.TIRUPATI BUILDERS (BID ID -3343673)