REPAIR/RENOVATION OF TOILET IN PRINCIPAL OFFICE OF KV SCHOOL AT AFS YELAHANKA

Amount

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation for shafts, cills, cesspits, manhole pier holes n.exc 10Sqm on plan and getting out complete in any type of soil all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 CM complete all as specified and directed.

Removing of excavated surplus soil to a distance not exceeding 50m and depositing where as directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter and finished concrete flat complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers including supports, overhangs, etc. also splays between floors and beams, etc and finished rough surfaces of concrete flat complete all as specified and directed.

M&L for Formwork to chajja and finished concrete flat complete all as specified and directed

M&L for reinforced cement concrete Nominal Mix Type B1, 1:2:4 (using 20mm graded stone aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete Nominal Mix Type B1, 1:2:4 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Reinforced cement concrete Nominal Mix Type B,1 1:2:4(using 20mm graded stone aggregate) in Chajja all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

S&F of mild steel work in tubular trusses including special shaped washer etc complete or butt-welded tubes conforming to IS-1161-1979 graded St-240 all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPs as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed

S&F of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed

S&F of Armstrong Board 10mm thick in ceiling fixed with screws all complete as per manufacturer’s instructions complete all as specified and directed

S&F Anodized aluminium snap grid of size 605mmx605mm (Powder coated) frame work for false ceiling, including 4mm dia GI wire for hanging complete all as specified in SSR and directed

M&L for PCC block masonry with solid blocks of grade C (5.0) as per IS:2185(Part-I)2005 exc. 10cm in width and setting in CM 1:4 complete all as specified and directed.

M&L for hard core broken stone or boulders of gauge 63mm deposited, spread and levelled to a true surface complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-1,1:3:6 (using 20mm graded stone aggregate) for plinth protection and surface is to be finished even & smooth complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall complete all as specified and directed.

M&L for 5mm thick cement plaster in CM 1:3 on ceiling surfaces rendering is to be even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered wall surface and applying two coat of cement base paint over and including a coat of primer on wall complete all as specified and directed.

M&L for preparation of newly plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M&L for preparing the new surfaces of wall and applying two coats of oil bond distemper over a coat of primer and including a coat of interior wall care putty 3mm thick complete all as specified and directed

M&L for Glazed coloured Ceramic tiles of size 300x450X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado including matching PVC corner beading over 10 mm thick rendering in CM 1:4 finished in toilets and kitchen complete all as specified and directed

M&L for Non-skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm as in flooring over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade,10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Granite (of any type) work 20mm thick (table rubbed and polished) in steps, wash basin counter and kitchen slab and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for 20mm thick screed bed in CM 1:6 for fixing of granite slab in steps, window cills etc. all as specified and directed.

S&F 20 mm dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F of CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying in floor all as specified and directed.

S&F gun metal globe/ gate valve 20 mm bore with iron wheel head screwed both ends all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F of plastic pedestal pattern seat cover black with flat bottom and cover and MS chromium plated hanging type device complete all as specified and directed.

S&F 10 litre capacity PVC syphonic action type for low level flushing cistern including flushing pipe and all fittings complete all as specified and directed.

S&F of vitreous china wash basin, white or coloured of size 550 x 400 mm with pedestal including brackets all as specified and directed.

S&F of pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks fly nuts, screwed for iron pipe and fixed in counter sunk and vitreous china wash basin complete all as specified and directed.

S&F of bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F of 15 mm dia two way bib taps with wall flange (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron/CPVC pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed.

S&F of 15mm dia stop valves, cast copper alloy, CP, screwed down, high pressure, with crutch, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F of Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed.

S&F of PTMT shower arm 15 mm size, 195 mm long with bend of 45 degree with flange all as specified and directed.

S&F of stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mmx420mm with bowl size 410mmx330mmx160mm complete all as specified and directed

S&F of 15mm dia sink cock fancy type wall mounted with swivel spout fixed with wall flanges complete all as specified and directed.

S&F of 15mm dia brass CP wall mixer with wall flanges for mixing of hot and cold water, screwed down for iron pipe and fixed complete all as specified and directed

Supply and Fixing PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and directed.

Supply and Fixing of 32/40mm PVC waste pipe for sink/urinal all as specified and directed.

S&F of CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats complete all as specified and directed.

S&F of CP towel ring fixed with and including chromium plated brass screws and wooden/plastic cleats all as specified and directed.

Supply and Fixing Stainless Steel Toilet paper holder, all as specified and directed.

S&F of stainless steel Soap dish fix to wall all as specified and directed.

S&F of Health faucet (ABS body) mild steel chromium plated suitable 15mm dia pipe with 1.25m long flexible tube and ABS wall hook complete all as specified and directed.

S&F of brass chromium plated bottle traps 32 mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as specified and directed

S&F of PVC (SWR) ‘S’/"P' trap 110mm bore all as specified and directed

S&F of PVC(SWR) Pipe 110mm dia single socketed, in any length with rubber ring joints, fixed to wall/floor all as specified and directed.

S&F of PVC (SWR) bends 110 mm dia in any radius with access door etc. all as specified and directed.

S&F of PVC (SWR) pipes 75 mm single socketed with in any length with rubber ring joints, laid in trenches or in floors/ walls all as specified and directed.

S&F PVC (SWR) bends 75 mm dia in any radius with access door etc. all as specified and directed

S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F of mild steel work holdfast, window grills t etc. for door frame etc. conforming to Fe-290 (Gde E-165) all as specified and directed.

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of colour PVC sheet reinforced with mild steel square tube, edges will be painted to match with prelam sheet complete all as specified and as directed

S&F of Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm colour PVC Sheet on back face including necessary fittings for fixing to frame etc complete all as specified and directed

S&F of 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type and both side is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F of powder coated anodised aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including jointing cleat for fixing etc aluminium section of powder coating not less than 50 micron complete all as specified and directed.

S&F of Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

S&F of sheet glass ordinary quality 4mm thick fixing with aluminium frame window/ventilator with clip in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator with or without glass roller including neoprene gasket complete all as specified and directed.

All as per item No. 70 above but figured glass pin head type

S&F of Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

S&F of aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extracted section and fixing bolt and sliding bolts of extracted section complete all as specified and directed.

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section all as specified and directed.

S&F for aluminium handle 150mm cast type anodised all as specified and directed.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

S&F in repair for aluminium powder coated drapery rod 20mm dia fixed with suitable bracket complete all as specified and directed. Note: Bracket will be measured and paid separately

S&F aluminium powder coated fancy type suitable brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws including necessary drilling & finished with polishing complete all as specified and directed. Note : Each opening shall have two fillets at both ends

M&L for 100mm thick PCC type D2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for Factory made WPC Single extruded board of 18mm thick pre-laminated shutter for kitchen cabinets, Cupboard, and the pre-laminated side with different density and other side plain with of density not less than 600kg/ cum. the 18mm board should be 100% lead free water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified. Cupboard cabinet and including necessary fittings like Hinges, handle and hanging rod and locking arrangement etc all as specified and directed

M&L for point wiring in PVC casing & capping all as required at site of size confirming to IS 2079-1973 medium grade on surface with PVC insulated unsheathed multistranded copper conductor cable (FRLS) 1.5 sqmm nominal cross sectional area 1100 volts grade with all fittings such as elbows, bends, junction boxes, saddles including PVC board (ISI Marked) and screws and rawal plug including 1.5 sqmm PVC insulated & unsheathed copper conductor cable as earth wire and connected to light/fan & common earth dolly with necessary copper thimble all as specified and directed for one light/bell / Fan point controlled by one ,one way switch.

All as per item No 82 above but one socket outlet 5 pin 5/6 Amps on independent board controlled by one, one way switch complete all as specified and directed.

All as per item No 82 above but one socket outlet 5 pin 5/6 Amps on same board with other one, one way switch complete all as specified and directed.

All as per item No 82 above but for socket out let, 15/16 Amps on independent board with 4 Sqmm size cable and 2.5 Sqmm for continuity earth wire connected to common earth dolly all as specified and directed.

S&F of Modular metal flush/PVC terminal boxes with lumina plate and frame suitable for 3 module complete all as specified and directed.

S&F of modular metal flush/PVC terminal boxes with lumina plate and frame suitable for 6 module complete all as specified and directed.

S&F of modular metal flush/PVC terminal boxes with lumina plate and frame suitable for 8 module complete all as specified and directed.

S&F of switch modular type single pole one module, 6 Amps complete all as specified and directed.

S&F of switch modular type single pole one module, 16 Amps complete all as specified and directed.

S&F of socket outlet modular type, multipurpose, 2/3 pin, single pole two module, 6 Amps complete all as specified and directed.

S&F of socket outlet modular type, multipurpose, 2/3 pin, single pole two module, 6/16 Amps complete all as specified and directed.

S&F of modular type stepped type electronic fan regulator 2 Module 230 Volts complete all as specified and directed

S&F in ceiling rose 2/3 terminals 65x25 mm dia polycarbonate isolated all as specified and directed.

S&F of LED light fitting two feet 1x10 watt, slim design, 230 volts, indoor recess mounting including connected with 3 core 23/0.0076 insulated copper wire from ceiling rose to fitting connector all as specified and directed.

Supply and fixing DB, SPN 8-way double door for MCB, 240 volt with 200 amps rated bus bar all as specified and directed.

Supply and fixing MCB 6-32 amps, 10 KA, SP 240 volt, 'C' series all as specified and directed

Supply and fixing MCB 32-40 amps, 10 KA, DP 240 volt, 'C' series all as specified and directed

M&L for sub main wiring in PVC casing and capping of required size 2x6 sqmm PVC insulated multistrand copper conductor with 01x6 sqmm PVC insulated multistrand copper conductor FRLS as earth continuity wire all as specified and directed. Note: For the purpose of payment two runs of 6 sqmm conductors and one run of 6sqmm conductor with casing capping will be measured as one length.

Supply and fixing LED slim square panel light fitting for surface ceiling light, 12-watt, colour white/warm white, pressure die cast aluminium luminaire in powder coated white finish, independent electronic driver and including connected with 3 core 23/0.0076 insulated copper wire from ceiling rose to fitting connector complete all as specified and directed. Make : Havells cat part No EDGESURFACESQDLR12WLED840S or equivalent wipro/Philips/Goldmedal/ Polycab

S&F exhaust fan AC single phase 230/240, 50 HZ Volt of size 250 mm sweep 900 RPM MS body heavy duty operating with louvers shutter complete grouting the ragged bolt in wall fixing the frame and exhaust fan fix including louver shutter with frame on the exhaust side and connecting with PVC insulator 3 core 23/0.0076 copper wire rubber insulated from ceiling rose to exhaust fan motor complete all as specified and as directed

S&F exhaust fan AC single phase 230/240, 50 HZ Volt of size 250 mm sweep 900 RPM PVC body, duly operating with louvers shutter complete grouting the ragged bolt in wall fixing the frame and exhaust fan fix including louver shutter with frame on the exhaust side and connecting with PVC insulator 3 core 23/0.0076 copper wire rubber insulated from ceiling rose to exhaust fan motor complete all as specified and directed

ANAND REFRIGERATION (BID ID -3292771)

SRI AYYAPPA ENTERPRISES (BID ID -3297771)

VARAHI ENGINEERS (BID ID -3291562)