Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.3 LAccepted-AOC VILL TUTNYU PO PS LAZU KHONSA DISTRICT TIRAP PIN 792130 ARUNACHAL PRADESH | KHONSA | TIRAP | ARUNACHAL PRADESH | 792130 | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹27.0 L+₹35,148.03 (1.32%)Rejected-Finance NAU PUKHRI ROAD MILLAN PALLY BYE LANE 2 NEAR GOYAL PALACE PO DISTT TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance DUE TO HIGHER RATE | |
| 3 | L3₹32.3 L+₹5.7 L (21.2%)Rejected-Finance COLLEGE ROAD CHABUA PO CHABUA DIST DIBRUGARH ASSAM 786184 | DIBRUGARH | ASSAM | 786184 | L3 | Rejected-Finance DUE TO HIGHER RATE | |
| 4 | L4₹33.1 L+₹6.4 L (23.8%)Rejected-Finance AT ROAD NEAR RENUKA CINEMA P O DIST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L4 | Rejected-Finance DUE TO HIGHER RATE | |
| 5 | L5₹33.3 L+₹6.6 L (24.9%)Rejected-Finance 16 BAITHAKKHANA ROAD 16 BAITHAKKHANA ROAD SEALDAH BAITHAKKHANA ROAD SEALDAH BAITHAKKHANA ROAD SEALDAH KOLKATA | L5 | Rejected-Finance DUE TO HIGHER RATE |
Tender Value
₹24.7 L
EMD Value
₹49,400
Closing Date
20 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
SPECIAL REPAIRS TO BLDG NOS P-8, T-4 AND P-4 OF 868 AT COY ASC AND CERTAIN MISC SANCTIONED WORKS AT LEKHAPANI MIL STATION
2022_MES_508327_4
8641/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
4 documents required · 4 mandatory
₹500
GE LEKHAPANI
₹49,400
Yes
5 Aug 2022
28 May 2022
27 Jun 2022
28 May 2022
20 Jun 2022
6 Jun 2022
60 days
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation getting out soft loose soil complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, getting out in soft / loose soil complete all as specified and directed
M & L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.
M& L PCC (1:2:4), type B-2, (using 40mm graded stone aggregate) as in foundations, filling, mass concrete etc complete all as specified and directed.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5sqm each and making good to disturbed surfaces and removing from site of work complete all as specified and as directed by the Engineer-in-Charge.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4.0sqm each and making good to disturbed surfaces and removing unserviceable materials from site of work complete all as specified and directed by the Engineer-in-Charge.
M&L Pressed steel frames of size125 mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.
M&L for PCC (1:3:6), type C-1, (using 20 mm graded stone aggregates) as in bed block, blocks for holdfasts, filling in pressed steel door frames , benching slightly rounded or chamfered angles and throating etc including necessary use and waste of form work complete all as specified and directed.
S&F Steel windows double leaf shutter i.e wire gauged and glazed both with incl frames, side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars to glazed shutter and without glazing bars to wire gauzed shutter , dovetailed or welded complete 50x5mm flat 100 mm long 2 Nos to each side all around to combine both shutter frames complete all as specified and directed.
S&F steel ventilators with side hung shutters including projected type hinges with steel handle and steel peg stay MS tower bolt 150mm long complete with glazing bars dovtailed or welded complete all as specified and directed.
S&F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & fixed to chowkats complete all as specified and directed.
S&F 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); complete fixed to frame all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete fixed to frames all as specified and as directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and directed.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F Framed work such as griils, grating, angle iron door frames etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290. Gde E-165 complete all as specified and directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.
S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F Aluminium alloy, anodized, sliding door bolt of size 300 mm length of bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified and directed.
S&F Floor door stopper doubled leged of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
M&L Preparing new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Demolition of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
M&L Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605mm x 605mm in true horizonatal level, hot dipped galvanised steel sections consisting of main “T” runner with suitably spaced joints to get required length and size 24mm x 38mm made from 0.30mm thick (Min) sheet spaced at 1200mm centre to centre and cross “T” of size 24mm x 28mm made of 0.30mm thick (Min) sheet, 1200mm long spaced between main “T” at 600mm centre to centre to form a grid of 1200mm x 600mm and secondary cross “T” of length 600mm and size 24mm x 28mm made of 0.30mm thick (Min) sheet to be interlocked at middle of the 1200mm x 600mm panel to form grids of 600mm x 600mm and wall angle of size 24mm x 24mm x 0.4mm. Main “T” runner to be suspended from ceiling using 2 to 3 mm GI wire from purlin or truss supports, 1200mm x 600mm centre to centre all complete for all heights as per specifications and as directed by Engineer – in - Charge.
S&F 4mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation and acoustic purpose to be placed in the grid system hold down clips, with provision of ligh fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detector etc. complete all as per manufacturer instructions,complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and as directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position.
S&F for rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
Dismantling structural steel work of any description complete all as specified and directed.
S& F Structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.
S&F Structural steel work as in single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections conforming to Fe-290 Gde-E-165) complete all as specified and directed.
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
M&L for Providing RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5 m clear span and similar works etc.complete including necessary form work,etc complete all as specified and directed.
M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia,complete all as specified and directed.
M & L for mild steel TMT bars 6 mm to 8 mm dia, as in stirrups cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Complete all as specified and as directed.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified and directed.
M&L for Brick work with sub class old size 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete as specified and directed.
M & L for Brick work with subclass “B” old size bricks, straight or curved on plan,exceeding 6 m mean radius, built in CM 1:6 complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water & removal of debris off the premises etc. complete all as specified and directed.
M&L for Rendering 10.mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces including finishing with even and smooth without using extra cement complete all as specified and directed.
M&L for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished fair and even complete all as specified and directed.
M&L Prepration of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M & L for Preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer over and including 1 to 2 mm thick wall care putty complete all as specified and directed.
M&L Preparation of newly plastered surfaces on walls and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of old painted or plastered surfaces of walls etc by washing, rubbing down and applying for two coat of cement base paint with and incl 1 to 2 mm thick wall care putty complete all as specified and directed.
M&L for preparation of old treated plastered surfaces of walls by washing, rubbing down etc. and applying one coat of white wash complete all as specified and directed.
M&L for complete removal of existing treatment on old plastered surfaces of walls and preparing surfaces as directed by applying of wall care putty of 1 to 2 mm thick and finally applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.
Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L 50 mm thick PCC (1:3:6) type C-1 (using 20 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all complete all as specified and directed.
M&L for Glazed coloured ceramic tiles in vertical surface 450x350 x 7mm or 350x250x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over and including 10 mm thick rendering as in backing coat of wall plaster in cement mortar (1:4) complete all as specified and directed.
M&L for Coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing with neat cement slurry @ 3.0 kg of cement per sqm complete all as specified and directed.
M&L for Coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for Coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4 for vertical surfaces such as skirting etc complete all as specified & directed.
M & L 75 mm thick PCC ( 1:4:8 ), type D-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.
M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L 60 mm thickness,machine pressed coloured precast concrete interlocking paver blocks of M-35 Grade with grey cement and pigments any shape and size confirming to IS 15658-2006 complete all as specified and directed.
S&F PVC (SWR) pipes of size110mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S&F PVC (SWR) pipes of size 75mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S&F PVC (SWR) bends of size 110mm dia any radius all as specified and directed.
S&F PVC (SWR) bends of size 75mm dia any radius all as specified and directed.
Taking up or down steel water tubing and connections, including cleaning for refixing or removal from site, for bore of pipes 15mm dia complete all as specified and directed.
S&F 15mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed.
Taking up or down steel water tubing and connections, including cleaning for re-fixing or removal from site, for bore of pipes 20mm dia complete all as specified and directed.
S&F 20mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repair vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding complete all as specified and directed.
S&F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings such as float valve, syphon, flush pipe, brackets,etc complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F in repairs 15mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repairs 20mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repairs, fancy type15mm dia long body Bib taps cast copper alloy, chromium plated screwed down to iron pipe or for brass ferrule & fixed complete all as specified and directed.
S&F MS cromium plated curtain rod 25 mm dia, with and including PVC decorative round finials on either end provide a visually balanced appearance including MS cromium plated brackets fixed to wall with 30 mm wooden steel screws and PVC rawl plug, anchors, and installation as fixed in repairs complete all as specified and directed.
M& L PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in foundations, filling, mass concrete etc complete all as specified and directed.
Taking down copper/aluminium point wiring, (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
M & L for concealed point wiring complete with 1.5 sq mm FRLSH,PVC insulated multi standard copper conductor single core cable 1100 volts grade,drawn into and including non metalic PVC rigid conduit medium grade of size not less than 20mm bore and conduit accessories fixed on wall roof etc, and including provn of PVC insulated 1.5 sq mm copper conductor cable for earth continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick MS sheet concealed in wall and laminated sheet cover of 3 mm thick on top for housing the switches socket,outlet etc.,for One light point controled by one one way 5 Amp switch complete all as specified and directed by Engineer-in-Charge. Note: PVC conduit cutting chases of wall making good disturbed wall surfaces including finishing with cement mortor 1:4 matching with existing shade of the painted surface are deemed to be included in the quoted rate.
All as per Item No.83 above but one fan point controlled by one , one way 5 Amp switch complete all as specified and directed
All as per Item No.83 above but One 5 pin socket outlet 05 Amp on independent board complete all as specified and directed
All as per Item No.83 above but One 5 pin socket outlet 05 Amp on same board with other switches complete all as specified and directed
All as per Item No.83 above but One bell point controlled by one bell push complete all as specified and directed
All as per item No 83 above, but for one 15 Amps socket outlet but using 2.5 sq mm,copper conductor with 2.5 sq mm,PVC insulated single core cable for earth continuity conductor,complete all as specified and directed
S&F Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket 20 Amps, 240V complete with one single pole MCB complete all as specified and directed
S&F Fan regulators electronic stepped type complete all as specified and directed
S&F switch piano flush type, 6 amps, 230V AC,single pole, one way. complete all as specified and directed
S&F switch socket combination multipurpose suitable for 2 pin and 3 pin 6 amp flush type complete all as specified and directed
S&F switch socket combination multipurpose suitable for 2 in 1 , 3 pin 5 & 15 amps flush type complete all as specified and directed
S&F socket outlet type 2 in 1 3/5 pin 5 Amps with other switches complete all as specified and directed
S&F for bell push flush type 5 Amps single pole 230 Volts AC Circuit complete all as specified and directed.
S&F call bell multi musical, AC 230 Volts single pole complete all as specified and directed.
S&F Ceiling rose, 3 terminals, surface bakelite, PVC/ Polycarbonate complete all as specified and directed
S&F LED tube light fitting 4 ft. 1 x 18 watt with 230 volts, with bipin holder connector block, LED retrofit tube rod etc complete with all accessories internally pre-wired and fixed to walls/ceiling with screw on round PVC blocks including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make for LED Batten : Crompton Cat Part No IGP162LT8-16 and Make for LED Tub Rod : Crompton Cat Part No LT8-20-865-2 or equivalent model in Havells/Bajaj/Philips.
S&F Round shape 15 watt 220 volts AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders LED lamp suitable for roof ceiling including connecting up with three core flexible copperconductor cable of suitable size all as specified and directed. Make : Halonix Cat Part HLDLR-R27S-15-CW or equivalent model in Havells/Bajaj/Philips.
S&F LED bldg security light fitting 48W watt with 230 Volts with IP 66. High Impact resistance complete with all accessories internally pre-wired and fixed to walls complete all as specified and directed. Make : Crompton Cat Part LSTS-45-CDL-M or equivalent model in Havells/Bajaj/Philips/Surya.
S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed
S & F Fan hooks made of MS clamp deformed to proper shape including nut & bolts and drilling/cutting roof as required at site and fixing fan hook with existing steel reinforcement all as directed by engr-in-charge.
M & L Sub main wiring complete with 2 runs of 6.00 sq mm,single core,PVC insulated,unsheathed cable,FRLSH,1100 volts grade,multi standard with copper conductor drawn through and including PVC casing caping and accessories on surface wall/floors/concealed etc. with one run of PVC insulated,FRLSH, 6 sq mm copper conductor for earth continuity conductor including taking down old unserviceable wiring all as specified and directed. Note :- Two runs of 6.00 sqmm cable one run of casing caping and one run of 6 sqmm copper wire shall be measured as one unit length.
S & F MCB SP 6 to 32 Amps 240 volts complete all as specified and directed
S & F MCB SPN 6 Amps to 32 Amps 240 volts complete complete all as specified and directed
S & F MCB TPN 6 to 32 Amps 415 volts complete.
S&F TPN DB wall mounting type, 415 Volts,4 Way with 200 Amps rated bus bar,double door suitable for fixing MCB's including connecting etc and taking down U/S DB ,main switch complete all as specified and directed
S&F single pole and neutral DB wall mounting type,240 Volts,8 Way with 200 Amps rated bus bar,double door suitable for fixing MCB's including connecting etc and taking down U/S DB, main switch complete all as specified and directed
S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep and connection complete all as specified and directed
S&F Lamp Holder insulated body with back plate angle/straight type suitable for batten complete all as specified and directed.
S&F LED Blub 10 watt Self Ballasted Retrofit type lamp with PBT body shell and DC Diffuser CCT 6500 K with fitting complete all as specified and directed.
Supply and spread sand for sand cushioning of cables in trenches complte all as specified and directed. Note: For the purpose of payment Punned thickness shall only be measured and paid.
M&L for brick protection using old size sub class ‘B’ new bricks, laid flat dry but jointed, laid length wise perpendicular to the axis of cable complete all as specified and directed.
S&F 40 mm bore GI tubing (ight grade) laid in trenches for cable protection complete all as specified and directed.
Taking down old un serviceable LT cable of any size and Supply, laying and testing of LT XLPE under ground cable, armoured, heavy duty , XLPE insulated and PVC sheathed, 1100 volts grade of size 4 core,25 sqmm. with aluminium conductors, multistranded, ISI marked including suitable cable lugs, cable gland, jointing materials etc laid in trenches, ducts, on floor/wall complete all as specified and directed.
M&L for Earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways including testing on completion complete all as specified and directed by Engineer-in-Charge.
MAA COMMUNICATION
M/s PRABIR ENTERPRISE
STANDARD ELECTRIC WINDERS
M/s HALDER ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .