8373SPECIAL REPAIR / REPLACEMENT OF BER PUMP SETS AT PUMP HOUSES / SWIMMING POOL INSTALLATION AND PROVN OF SPLIT TYPE AC AT ANIMAL HOUSE (BLDG NO P64 AND 65CBK) AND PROVN OF WATER SUPPLY CONNECTION AND ALLIED ITEMS FOR MD ACCN AT AFMC UNDER GE (CENT

Amount

Dismantling and taking down existing unserviceable pumps sets from various locations including all accessories carefully and depositings the same to MES store complete all as directed.

Supply , install, testiing and commissioning Monoblock Pump set of cap 12.5 HP, 3 phase AC, 50 Hz, 3000 RPM with suction and delivery of size 100 x 100 mm, head 30 Metre, discharge capacity of pump set 19.8 LPS. Model No - KDS 1331+ of Make Kirloskar or equivalent approved makes as given in Apprx 'A' List of makes.

Supply, install, testiing and commissioning Monoblock Pump set of cap 10 HP, 3 phase AC 50 Hz, 3000 RPM with suction and delivery of size 80 x 65 mm, head 30 Metre discharge capacity of pump set 17 LPS. Model No - KDS 1040+ of Make Kirloskar or equivalent approved makes as given in Apprx 'A' List of makes.

Supply, install, testiing and commissioning Monoblock Pump set of cap 7.5 HP, 3 phase AC 50 Hz, 3000 RPM with suction and delivery of size 80 x 65 mm, head 30 Metre, discharge capacity of pump set 11.10 LPS. Model No - KDS 830++ of Make Kirloskar or equivalent approved makes as given in Apprx 'A' List of makes.

Supply & fix DOL starter (MK 1.5 DOL) in sheet metal enclosure, 415 Volts, 50 Hz, Three phase for electric motor of capacity 10 / 7.5 HP complete all as specified and as directed.

Supply & fix DOL starter (MK 1.5 DOL) in sheet metal enclosure, 415 Volts, 50 Hz ,Three phase for electric motor of capacity 12.5 HP of relay range upto 14 Amps complete all as specified and as directed.

Supply and fixing for submerssible copper conductor mutistraned cable of size 3 core x 4 Sqmm alongwith heavy duty PVC conduit ISI marked of suitable size with necesssary fittings and connections from Motor to starter complete all as specified.

Supply and fixing for submerssible copper conductor mutistraned cable of size 3 core x 6 Sqmm alongwith heavy duty PVC conduit ISI marked of suitable size with necesssary fittings and connections from Motor to starter complete all as specified.

Supply & lay 80mm bore dia galvanized iron pipe, medium grade including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls and ceilings or laid in floors / trenches complete all as directed.

Supply & lay 50mm bore dia galvanized iron pipe, medium grade including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls and ceilings or laid in floors / trenches complete all as directed.

Supply & lay 25mm bore dia galvanized iron pipe, medium grade including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls and ceilings or laid in floors / trenches complete all as directed.

Supply & lay 20mm bore dia galvanized iron pipe, medium grade including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls and ceilings or laid in floors / trenches complete all as directed.

S & F 50mm bore dia Gun metal, globe or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe and fixed complete of size complete all as directed.

S & F 25mm bore dia Gun metal, globe or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe and fixed complete of size complete all as directed.

S & F 20mm bore dia Gun metal, globe or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe and fixed complete of size complete all as directed.

Supply, install, testing and commissioning 80mm bore dia reflex/ Non return valve , both end flanged ISI marked including making new flanged joints with 3mm thick rubber gasket with necessary bolts, nuts & washer etc of suitable size complete all as directed

Supply, install, testing and commissioning 50mm bore dia, reflex/ Non return valve , both end flanged ISI marked including making new flanged joints with 3mm thick rubber gasket with necessary bolts, nuts washer etc of suitable size complete all as directed

Supply, testing and fixing 80mm bore dia cast iron foot valve, ISI marked both end flanged with nut , bolt & washers and rubber gasket ISI marked complete all as directed.

M & L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete for foundation of Pumps / motors including use and waste of necessary form work / MS channel and fair finishing the surface without using extra cement complete all as directed.

M & L for connecting pieces as bell mounth, Bends, tapers, union, elbow , Tees, pieces (Single or double branch) any Type and angle/radius and straight connecting pieces for GI Pipe upto 150 mm bore dia complete all as specified and as directed.

M & L for MS fittings such as caps, collars, flanges of any type duly threaded as per required size duly drilled holes including nuts, bolts, washers, gaskets etc including welding wherever necessary complete all as directed.

M & L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size and including painting with two coats of synthetic enamel paint over a coat of red oxide prime complete all as specified and as directed.

M & L for brick work with subclass 'B' bricks, straight or curved on plan not exc 6m mean redius built in cement motar 1:6 complete all as directed.

M & L for Sub main wiring with 2 runs of single core 4 Sqmm PVC insulated unsheathed multistranded 1100 Volts grade with copper conductor drawn through in and including 25mm PVC conduit, ISI marked and its accessories duly on wall / roof including one run of single core 4 Sqmm PVC insulated unsheathed multistranded 1100 Volts grade with copper conductor cable as earth continuity conductor complete all as specified. Note:- Two run of 4 Sqmm conductor & one run of 4 Sqmm earth conductor and One ru of PVC Casing & caping will be measured as on RM

S & F 240 Volt, Single pole and neutral enclosure with a two pin and earth plug and socket with including one 20 Amp single pole MCB complete all as specified.

S & F MCB Single pole rated capacity 6 to 32 amps, 240 Volt, breaking capacity 10 KA, C-curve complete all as specified.

Supply, Installation/ fixing, testing, commissioning of inverter type air conditioner unit (Spli type unit of capacity 2.0TR with cordless remote, compresing of indoor and outdoor unit) and suitable star rating issued by (ISEER), electric driven, single phase, 230 Volt, 50 Hz, AC including necessary fixing arrangement complete (indoor unit at suitable place outside the building on plinth height/ on wall or roof as suitable and as directed) including necessary control cabling from power socket to indoor/ outdoor units, metallic bracket with fixing bolts for outdoor unit, insulated copper piping, PVC drain pipe upto ground level etc complete and including suitable rating Stabilizer complete all as specified and directed.

M & L cutting existing CI/DI pipeline of size 200/150/100/80 mm bore dia in position for inserting CI/DI specials/ fittings as required at site such as Tees, Collars, Tail Pieces, Reducers, Flanges, Bends etc including required excavation and earthwork complete all as specified and as directed. Note : Specials/Fittings such as Tee, Collar, Tail Piece, Reducer, Bends etc wiil be measured and paid separately

M & L for connecting pieces one end flanged and other end socket or spigot and bell mouth pieces one end flanged other end tapering as bell mounth, CI Bends tapers, Tees, pieces (Single or double branch) any Type and angle/ radius and straight connecting pieces for CI/DI Pipe upto 200 mm bore dia complete all as specified and as directed.

M & L for Run Lead joint in spigot and socket pipes and fittings of size 200 mm bore dia including necessary caulking the spun yarn as required complete all as specified.

M & L for Run Lead joint in spigot and socket pipes and fittings of size 150 mm bore dia including necessary caulking the spun yarn as required complete all as specified.

M & L for Run Lead joint in spigot and socket pipes and fittings of size 100 mm dia including necessary caulking the spun yarn as required complete all as specified.

M & L for MS flanges, Reducers of any type duly threaded as per required size duly drilled holes including nuts, bolts, washers, gaskets etc including welding to flange and GI Pipe wherever necessary complete all as specified and as directed

M & L Gasket Joint with rubber or fibre board for flanged Pipes and fittings of size 80 mm bore dia including nuts, bolts, washers and white lead or mineral oil etc complete all as specified and as directed

Supply and fixing Mechanical joint of made out of MS of thickness not less than 6mm fabricated as per existing site requirement including long MS nut, bolt, rubber gasket, cutting/fixing of pipe in position of any size CI/GI/DI pipe upto 200 mm bore dia with the help of manually as well as mechanical T&P complete all as directed.

S&F Cast iron Double Flanged Non- Rising Spindle type Sluice valve of size 80 mm bore dia having stainless steel to AISI 410 Spindle & Gun Metal Working parts, manually Handwheel operated PN -1.6 with ISI Marked flange ends drilled complete all as specified and as directed.

M&L construction of Brick Masonry Valve Pit chamber of size 1200mm x 1200mm x 1000mm (Internal Dimension) , one Brick thick wall built in cement mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded stone aggregate) in Foundation, Rendering 15mm thick in CM 1:4 internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40x5mm Flat Iron Frame alround including provision of Hinges, Handle and Locking arrangement and 40 x 40 x 6mm angle iron frame fixed on top of valve pit by means of holdfast 150mm long, embedded in PCC 1:2:4 (20mm graded stone aggregate) Block of size 230 x 200 x 100 mm including applying two coats of anti-corrosive paint over a coat of red oxide zinc chrome primer after preparation of all exposed to steel surfaces including necessary Earth Work in hard/dense soil valve pit complete all as specified and as directed

Cutting of road/hard standing for making of new connection of pipe and making good with PCC (1:2:4) using 12.5mm graded stone aggregate complete all as specified

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth for laying of pipe and getting out in soft/loose soil complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and as directed

Removing excavated meterial to a distance n.exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed

Takshashila electricals

CHAITANYA WINDWELL