CERTAIN REPAIR TO LT DISTRIBUTION SYSTEM ALONGWITH ALLIED WORKS AT DOMESTIC AREA AND TECH AREA AT BHISIANA UNDER GE (AF) BHISIANA

Excavation in trenches (Manual), not exceeding 1.5m wide and not exceeding 1.5m in depth for pipe line, cable in trenches etc., not exceeding 10 Sqm on plan and getting out in any type of soft including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed.

Excavation in trenches (Manual), not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3m in depth for pipe line, cable in trenches, for pole etc., not exceeding 10 Sqm on plan and getting out in any type of soft including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed.

Returning, filling including spreading, leveling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Material and labour for boring of holes (trenchless horizontal Directional Drilling) under road pavement, hard standing or any other situation by using trenchless boring manual manpower by using manpower auger machine/spiral-bladed drill /Boki/mechanically or any other means suitable for accommodate/inserting pipe upto 100mm bore in the drilled holes, including excavation, returning filling in the both ends working space including removal of surplus soil and making good the surface complete all as specified and as directed. Note ; (i) Only length of the road/hard standing/Pavement will be measured for payment and cost for excavation, returning filling and making good at both side of bore shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. (ii) Pipe shall be measured and paid separately)

Labour only for locating, checking and sensing faults in existing underground LT cable of size 10 Sqmm to 50 Sqmm, 2 core to 4 core, by taking up/down the cable from trenches, floor, along pole, or any open surface etc at required locations, carrying out necessary testing/inspection to identify the fault, including taking out layer of cable protection cover any type complete in all respects as specified and directed by the Engineer-in-Charge.

Labour for only locating, checking and sensing faults in existing underground LT cable of size 70 Sqmm to 120 Sqmm, 3.5 core, by taking up/down the cable from trenches, floor, along pole, or any open surface etc at required locations, carrying out necessary testing/inspection to identify the fault, including taking out layer of cable protection cover any type complete in all respects as specified and directed by the Engineer-in-Charge.

Labour only for locating, checking and sensing faults in existing underground LT cable of size 185 Sqmm to 240 Sqmm, 3.5 core, by taking up/down the cable from trenches, floor, along pole, or any open surface etc at required locations, carrying out necessary testing/inspection to identify the fault, including taking out layer of cable protection cover any type complete in all respects as specified and directed by the Engineer-in-Charge.

Labour only for laying, fixing and drawing old serviceable LT cable of size 10 Sqmm to 50 Sqmm, 2 core to 4 core, in trenches, on floors, along poles, walls or any other open surface, including drawing the cable through protection pipes/conduits wherever required, dressing, aligning and securing the cable in position with necessary minor consumables such as binding wire, saddles etc, and making necessary end connections including supply and fixing of suitable size thimbles and testing, complete in all respects as specified and directed by the Engineer-in-Charge.

Labour only for laying, fixing and drawing old serviceable LT cable of size 70 Sqmm to 120 Sqmm, 3.5 core, in trenches, on floors, along poles, walls or any other open surface, including drawing the cable through protection pipes/conduits wherever required, dressing, aligning and securing the cable in position with necessary minor consumables such as binding wire, saddles etc, and making necessary end connections including supply and fixing of suitable size thimbles and testing, complete in all respects as specified and directed by the Engineer-in-Charge.