RESURFACING OF B-GAP BUND ROAD, CONSTRUCTION OF APRAOCH ROAD, BOUNDRY WALL and GODOWN CUM TESTING LAB IN B GAP COLONY IN DISTRICT NAWALPARASI OF NEPAL TERRITORY. LOT 27

Amount

RESURFACING OF B-GAP BUND ROAD FROM 0.00 TO 7.200 IN DISTRICT NAWALPARASI OF NEPAL TERRITORY.

Providing, laying, spreading and compacting stone aggregates of praper sizes and specified quarry to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled 80-100 kn in stages to proper grade and camber, applying and brooming crushable screening to fill up the interstices of coarse aggregate, watering and compecting to the required density grading-3 as per direction of engineer In Charge including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Providing and applying primer coat with Emulsion (SS-1) on prepared surface of granular Base including cleaning of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Providing and applying tack coat with bitumen VG-10 grade using pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Providing, laying and rolling of required open-graded premix surfacing of 20 mm thickness composed of 13.2 mm and 11.2 mm aggregates 0f specific quarry, using VG-10 grade bitumen to required line grade and level to serve as wearing coat on a previously prepared base by manual means including mixing in a sutaibule Mixall (6/10 T capacity Bitumen boiler oil fired 1000 liter capacity fitted with spray set) or Moveable Mini hot mix plant laying and rolling with a smooth wheeled roller 8-10 ton capacity, finished to required level and grades including cost of all materials, labour, lead, lift, T&P etc. required for proper completion of work as per direction of engineer incharge.

Providing and laying seal coat by manual means with VG-10 grade Bitumen sealing to fill the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per TSC 510, including cost of all materials, labour, lead, lift, T&P etc. required for proper completion of work as per direction of engineer incharge.

Laying of R.B.M. on road shoulder including cost of all materials, labour, lead, lift, T&P etc. required for proper completion of work as per direction of engineer incharge.

CONSTRUCTION OF APPRAOCH ROAD FROM B-GAP BUND TO FLOOD CONTROL ROOM IN DISTRICT NAWALPARASI OF NEPAL TERRITORY.

Earth work in filling in embankment in ordinary soil (Loam, Clay or sand) including ramming and dressing the surface to required levels slopes including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Construction of granular sub-base Grade-I by providing well graded material from specified quarry spreading in uniform layers in 12.5 cm compacted thickness on earthen portion with motor grader/tractor mounted appropriate equipment on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work as per direction of engineer incharge.

Providing, laying, spreading and compacting stone aggregates of praper sizes and specified quarry to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled 80-100 kn in stages to proper grade and camber, applying and brooming crushable screening to fill up the interstices of coarse aggregate, watering and compecting to the required density grading-3 as per direction of engineer In Charge including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled 80-100 kn in stages to proper grade and camber, applying and brooming crushable screening to fill up the interstices of coarse aggregate, watering and compecting to the required density grading-3 as per direction of engineer In Charge including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Providing and laying of factory made 80 mm thick rubber moulded interlocking cement concrete tiles (30mpa) including 25 mm thick compacted bed of fine sand compacting and proper embedding/ laying of interlocking tiles leveling and dressing of surface to required level and slope, filling joints with fine sand including the cost of materials, labour, T & P etc. required for proper completion of work as directed by the Engineer-in-charge.

Providing and applying primer coat with Emulsion (SS-1) on prepared surface of granular Base including cleaning of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means including cost of all lead, lift, materials, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Providing and applying tack coat with bitumen VG-10 grade using pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Providing, laying and rolling of required open-graded premix surfacing of 20 mm thickness composed of 13.2 mm and 11.2 mm aggregates of specific quarry, using VG-10 grade bitumen to required line grade and level to serve as wearing coat on a previously prepared base by manual means including mixing in a sutaibule Mixall (6/10 T capacity Bitumen boiler oil fired 1000 liter capacity fitted with spray set) or Moveable Mini hot mix plant laying and rolling with a smooth wheeled roller 8-10 ton capacity, finished to required level and grades including cost of all materials, labour, lead, lift, T&P etc. required for proper completion of work as per direction of engineer incharge.

Providing and laying seal coat by manual means with VG-10 grade Bitumen sealing to fill the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per TSC 510, including cost of all materials, labour, lead, lift, T&P etc. required for proper completion of work as per direction of engineer incharge.

Laying C.C. 1:4:8 with proper coarse and fine aggregates of specific quarry including cost of all materials, labour, T&P etc. required for proper completion of work as per direction of engineer incharge.

1st class brick work in 1:4 cement mortar including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

CONSTRUCTION OF BOUNDRY WALL OF B-GAP COLONY IN DISTRICT NAWALPARASI OF NEPAL TERRITORY.

E/w in foundation including digging and refilling the trenches with its proper disposal ncluding cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Laying C.C. 1:4:8 with proper coarse and fine aggregates of specific quarry including cost of all materials, labour, T&P etc. required for proper completion of work as per direction of engineer incharge.

Centering and shuttering for R.C.C. & C.C. work including cost of all materials, labour, T&P etc. required for proper completion of work as per direction of engineer incharge.

Reinforcement in R.C.C. work with cutting, bending, placing in position and binding with 24 S.W.G. binding wire ncluding cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

R.C.C. in column and plinth beam ncluding cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge but excluding cost of steel.

1st class brick work in 1:4 cement mortar ncluding cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Supply and fixing of 100 mm dia PVC pipe for drain of rain water in colony campus ncluding cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Laying C.C for coping ncluding cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Supply & fixing of Iron gate ncluding cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

12 mm thick Plaster in 1:4 cm ncluding cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Snowcem three coat over new surface ncluding cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

CONSTRUCTION OF GODOWN CUM TESTING LAB IN B GAP COLONY DIST. NAWALPARASI IN NEPAL TERRITORY.

Excavation in foundation in ordinary soil(loamclay or sand ) including lift up to 1.5 m and lead up to 30 m and including filling watering and ramming of excavated earth into the space betwe en the building and the side of foundation tren-ch or into the plinth and removal and disposal of surplus earth as directed by engineer in charge up to a distance of 30 m from the foundation trench including all T&P phawer a and basket etc complete.

Sand filling in plinth including supply of necessary quantity of sand from a distace not exceeding 8km. From the site of work icluding watering dressing etc rate to includecost of all material labour T&P etc required for

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating barrier under and around the column pits, wall trenches ,basement excavation top surface of plinth,filling junction of wall and floors,along the external perimeter of building ,expanion joints ,surrounding of pipes and conduit etc. complete plinth area of the building at aldrine emulsifiable material such as chloropyriphos or heptrachlor or chlordance will be used.including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

PCC Under foundation and floor in 1:4:8 cement sand of 1.25 F.M. with 4 cm.gauge stone ballast including supply of all material labour and tool plants etc required for proper completion of work.

R.C.C. 1:1.5:3 in lintel of door window sun excluding its fixing and binding the same with 24B WGGI binding wire and including necessary centring shuttering etc and also including S/O all materials required for proper completion of work.

R.C.C. 1:1.5:3 in RCC raft foundation and footing excluding its fixing and binding the same with 24B WGGI binding wire and including necessary centring shuttering etc and also including S/O all materials required for proper completion of work.

R.C.C. 1:1.5:3 in R.C.C. Column excluding its fixing and binding the same with 24B WGGI binding wire and including necessary centring shuttering etc and also including S/O all materials required for proper completion of work.

R.C.C. 1:1.5:3 in lighter plinth beam excluding its fixing and binding the same with 24B WGGI binding wire and including necessary centring shuttering etc and also including S/O all materials required for proper completion of work.

R.C.C. 1:1.5:3 in T beam excluding its fixing and binding the same with 24B WGGI binding wire and including necessary centring shuttering etc and also including S/O all materials required for proper completion of work.

R.C.C. 1:1.5:3 in RCC roof slab excluding its fixing and binding the same with 24B WGGI binding wire and including necessary centring shuttering etc and also including S/O all materials required for proper completion of work.

R.C.C. 1:1.5:3 in roof RCC sun shed & lir excluding its fixing and binding the same with 24B WGGI binding wire and including necessary centring shuttering etc and also including S/O all materials required for proper completion of work.

Clas 150 brick work in foundation and plith &plinth in 1:6 cement and fine sand including supply of all material labour T&P required for proper completion of work.

Providing and fixing DPC 2.5 cm including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Above but in super structure 1:5 including necessary cuttin g and moulding of brick work thickness of wall 23 cm. including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Above but in super structire 1:3 including necessary cutting and moulding of brick work thickness of wall 12cm including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Mild steel or iron in plain work such as reinforced concreate or reinforced brick work when not included in over all rates ) wrought to required shap as necessary including bending for proper completion of work including supply of steel its wastage bend hookand authorised over lapping shall be measured including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Mild steel or iron wor of small size and sect such as holding down bolt , hold fast tie rod. grating etc (when not inccluded in an over all rate es) wrough t to required fro m including suppply of steel and its wastage icluding cost of bolt nu t if required and welding grinding and making hole as required for proper compltion of work fabrication of door chaukhat.nozing including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work n as per direction of engineer incharge.

Fabrication of grill / stair case railing including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Fixing of wooden door chaukhat in positio MR Door chaukhat including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Providing commercial flush door one side veneer and other side decorative including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Providing fixing 4mm glass pan in window MR including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

12mm cement plaster in single coa t on rouhg side in cemen t and sand of 1.25 finess moduous in 1:4 plastering up to two floor level inclluding internal rounded angle not exceding 80 mm girth and finished even and smooth. including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

12mm cement plaster in single coat on fair side in cement and sand of 1.25 finess modulous in 1:4 plastering up to two floor level including internal rounded angle not exceding 80 mm girth and finished even and smooth. including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Providing and fixing vitrified floor tiles including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Supply and fixing 6mm China glazed tiles in floor ing or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement ,slury , jointing and polishing complete including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Finishing wall with water proofing cement paint of approved make and quality on new work with two coat to give an even shad including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

Wall painting two coat with plastic acrylic paint of first quality approved brand and manufacture on under coated wall surface two give an even shade including thoroughly brushing and other foreign matter and sand prepare smooth T&P etc. required for proper completion of work on as per direction of engineer incharge.

Providing and lying brick coba treatment including cost of all lead, lift, material, labour, T&P etc. required for proper completion of work on as per direction of engineer incharge.

M/S SHUBH NARAYAN SINGH