Construction of Compound Wall around Baba Dug well Sidhra in Ward No. 71 (Under JMC Capex Plan 2023-24)

Amount

Earth work in excavation by manual means in trenches for foundation , drains , pipes cables etc (not exceeding 1.5 mtr in width) and for shafts wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in:- All kinds of soils (60%).

Earth work in excavation by manual means in trenches for foundation , drains , pipes cables etc (not exceeding 1.5 mtr in width) and for shafts wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in:- Ordinary rock (40%)

Labour engaged for removing unhygeinic material from sump tank and dismantling of old damaged cement concrete (Plinth) Labour

Providing and laying in position cement concrete of 1:4:8 mix (1 cement 4 coarse sand 8 graded stone agg. 40 mm nominal size) excl. cost of centring and shuttering all work up to plinth level (using crushed stone agg.)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) (using crushed stone agg.)

Dumping of stone including in horizontal including supply of stone

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Half brick masonry with common brunt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for Half Brick work masonry in superstructure above plinth level upto floor V level

Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns etc.

Centring and shuttering including strutting, propping etc and removal of form for walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) G.I. pipe 150mmØ

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) G.I. pipe 100mmØ

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) G.I. pipe 80mmØ

15mm thick Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand) .

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Welding of joints by electric arc welding including, testing and commissioning of joints including carriage of set and all other accessories including making arrangement for electric supply/arrangement for Generator etc complete

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). 150mm dia

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). 100mm dia

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). 80mm dia

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

Carriage of Sand & stone aggregate below 40mm by Mechanical Transport from source (to be identified by engineer in charge) to road side including cost for loading and unloading for an av. distance of 20 km

Carriage of cement from nearest market (as approved by Engineer in Charge) to road side by Mechanical Transport to site of work including cost for loading ,unloading & stacking for an av. distance of Average 20 km

Carriage of soling stone by mechanical means from road side (to be identified by Engineer in Charge) to site of work including cost for loading ,unloading & stacking for an av. distance of Average 20km

Carriage of Bricks by Mechanical Transport from source (to be identified by engineer in charge) to road side including cost for loading and unloading.for an av. distance of Average 20 km

Ravi Kant Verma