REPAIRS TO JOINERY, FALSE CEILING, WALL PANELING, TILING, SANITARY FITTING, ROOF SHEET AND OTHER MISC BR WORKS AT CERTAIN UNITS OF FORT AREA NAGPUR UNDER GE KAMPTEE.

Amount

Taking down chowkat with shutter (Without taking of shutter from frame) area exc 1.50 Sqm but nexc 4.00 Sqm each complete all a specified and directed.

Taking down chowkat with shutter (Without taking of shutter from frame) area nexc 1.50 Sqm each complete all a specified and directed.

Taking down shutter of any description exc 1.00 Sqm but n exc 2.00 Sqm each complete all a specified and directed.

M&L for Cutting holes for inserting hold fast and making good dismaltled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1as required exc one brick but not exc two bricks complete all as specified and direcrted.

S&F 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints complete all a specified and directed.

S&F Mild steel bands, straps, support clamps, hold fasts etc and similar small articles conforming to Fe-410-0 or 310-0 complete all a specified and directed.

M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making hold fast and fixing in concrete 1:3:6 type CI incl tie bars of 10 mm dia and hold fast of flat iron 40 X 5 mm all complete confirming to Fe 290 (Gde E-165) complete all as specified and directed.

S&F 35 mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12 mm thick veneered particle board or 9 mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned an chemically pressure freated of any number of panel complete all a specified and directed.

S&F 2nd class hard wood 30mm thickness Glazed and skeleton shutters ( Factory made), open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all a specified and directed.

S&F 30mm thick Flush shutters solid core construction with Block board and plywood face panels commercial type both side complete all a specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as specified and drawing complete all a specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat molded wood plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet as for top rail lock rail & bottom rail on either side, complete all a specified and directed.

All as per item No. 12 above but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all a specified and directed.

S&F aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer's specifications complete all as specified and directed. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 4.0 mm thick tinted sheet glass of approved make and shade/tint(Make of Aluminium Sections powder coated

M&L in repair for 10 to 12 mm thick froasted toughend glass fixed to door, window or any other location including brackets, supports , handles, lock, floor springs and other accesaries as required complete all as specified and directed.

S&F powder coated aluminium frame for door, windows, ventilator ,partations with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubber neoprene packing handles 2 Nos of each door, 3 Nos of 100 mm hinges ,02 Nos of 250 mm aldorp bolt,200 mm tower bolt in each door and fitting colour match with door & aluminium snap beading screws etc complete all as specifed.

S&F powder coated aluminium ventilator shutters, side hung type/Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S & F grills and gratings etc framed angle iron and MS sheets etc and guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and milar work confirming to FE 290 GdeE165 complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

S&F 4.8 mm thick tinted glass and glazing with rubber beading and aluminium glazing bar in each panel complete all as specified and directed.

S&F figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 Sqm each of thickness 3.0mm.

M&L 12 mm thick prelaminated particle board, Exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber or aluminium frame work complete all as specified.

S & F in repair Aluminium Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed fixed in repairs all as specified.

S&F in repairs MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair complete all as specified and as directed.

S&F MS butt hinges medium weight cold rolled 100mm size complete all as specified and as directed.

S&F S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed.

S&F 300mm long Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and as directed.

S&F for 150mm long aluminum handles, cast type, anodized complete all a specified and directed.

S&F for 150mm long aluminum, anodized, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F aluminium anodized door stopper 140mm long overall length complete all as specified and as directed.

S&F in repairs for Brass Mortice lock, vertical type, size 100 mm with 4 lever complete all a specified and directed.

S & F in repairs Floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor over all length 150 mm complete all a specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of pink primer complete all a specified and directed.

M&L for preparation New steel and iron surface not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame complete all as specified.

S&F 3.0mm thick ordinay sheet glass in squares n.exc. 0.5 Sqm each pane with oil putty all as specified.

S&F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails as in cupboard, drawers, showcase, cupboard shutters, wooden shelves, Partition etc complete all as specified and directed.

M&L for 18 mm thick prelaminated particle board, Exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber or aluminium frame work complete all as specified.

M&L for 18mm thick Plywood, grade BWR, type BB fixed with screws to timber frame work with beading as requiredcomplete all as specified and directed.

M&L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all a specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters,purlins, etc. under 40 sq. Cm in section frame work in any position complete complete all a specified and directed.

M&L for Second class hard-wood Plain fillets square, rectangular or triangular in sectionexc 13cm and nexc 25 sqcm sectional area, clean sawn, se-cured with nails or brads in cupboard and similar work etc all as specified and directed.

M&L for Second class hard-wood Plain fillets square, rectangular or triangular in sectionexc 3 sqcm sectional area, clean sawn, se-cured with nails or brads in cupboard and similar work etc all as specified and directed.

S&F for 100mm long Brass handles, cast type, polished bright complete all a specified and directed.

S&F Stainless steel 4 inch auto hinges complete all as specified.

S & F for 40mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all a specified and directed.

M&L for providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc.Triple strip vertical type complete all a specified and directed.

S&F 100mm size of aluminium hasp & staple including bolt to hinge plate & fixed with screws, all as specified.

Dismantling wall and ceiling boards ( Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover fillets complete all as specified and directed.

Material and labour 4mm thick for Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and as directed. (Noted: Grid shall be measured and paid separately)

M & L for Gl powder coated snap grid frame work for flase ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 2mm Gl supended wire of suitable length and butter fly clip of size of main Tee shall be 32mmx 15mm x 0.30mm, cross Tee shall be 32mm x 15mm x 0.30mm thick and wall angle shall be 24mm x 24mm x 0.30mm thick complete all as specified and as directed.

Refexing of non-asbestos designer fiber cement building boards of size 595x595x4mm fixed or laid/inserted to GI frame work with screws/clips as in ceiling laid flat or sloping as directed. complete all as specified and directed.

S&F 12.5mm Gypsum board to frame work including jointing and taping complete all as specified and as directed.

M&L in repairs for POP board false ceiling multi level 12/12.5mm thick fixed in galvanized grid work as required quanity as site with 25mm long self drilling and tapping screw acing phillips head with under end outer at 200mm centre to centre, including finishing to joint of face board with specially formulated jointing compound including GI suspenders of 6mm thick and joints of ceiling board shall be finsihed 48 mm wide fibre tape to provide eseam less finish etc, M&L for preparing POP false ceiling and applying two coat of luster paint over coat of primer as per recommended by manufacture etc, complete all as specified and directed.

S&F 5 to 7mm hollow, PVC false ceiling decoratie type single side prelam PVC sheet used instead of plain colour sheet fixing at site with GI grid frame work as per manufacture instruction complete all as specified and directed.

S&F PVC wall panelling consisting of 5 to 7 mm thick hollow type, single side prelam PVC sheet used instead of plain colour sheet fix to wall with screws incl matching PVC beading all as per complete all as specified and directed.

S&F in repairs venetian blinds, sheer demout blinds of with aluminium roller tube, cassette colour white fabric weight 140gms, light control 70% fabric composition 100% polyester complete all as specified and as directed.

S&F in repairs venetian blinds, vertical type, complete all as specified and as directed.

S&F in repairs glass shelf 500x60x6mm (with ABS brackets) complete all as specidied and directed. Make- Prayag , CAT No.: BEA-47 or equivalent complete all a specified and directed.

S&F Corner glass Shelf (with Bracket) fixed to walls with chromium plated (CP) brass screws Make Jaquar (.ACN-CHR-1173) or equivalent complete all a specified and directed.

S&F in repair Prayag wall cabinet Mirror (500x400Appx) Make- Prayag , CAT No.: 556 or equivalent

S & F Peg set of six powder coated fixed with chromium plated brass screws including rawal plug complete all as specified and as directed.

S&F in repairs Harrison rails, Stainless steel, chromium plated with fixing brackets etc complete all as specified and directed.

S&F in repairs bracket brass chromium plated for fixing of Harrison rails, mild steel, chromium plated complete all as specified and directed.

S&F wire brush with aluminium section 25mm x 1 mm and brooms to fill the gap of floor and door shutter complete all as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

Taking down cement plaster of any description including racking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L Rendering 10 mm thick in CM 1:6 on fair faces of brick/concrete work surfaces to be finished even and smooth (without using extra lime or cement complete all as specified and directed..

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished fair and even all as specified and directed.

M&L for two coats of cement base paint over a coat of white wash on new plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for preparing newly plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whiting, white primer complete on walls complete all as specified and as directed.

Demolition of cement concrete in ground floor & pavings n.exc 15cm thk (below or above ground level) complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortat bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate in foundation complete all as specified and as directed.

M & L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate)complete all as specified and directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, dark shed area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:6 as specified and directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, dark shed area of each tile not exceeding 0.36 sqm in Skirting etc set and including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, dark shed area of each tile exc 0.42 but not exceeding 1.0 sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:6 as specified and directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, dark shed area of each tile not exceeding 1.0 sqm in Skirting etc set and including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted.

M&L joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 as specified and directed.

M&L colored glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm cement screed bed in cement mortar 1:3 over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

All all as per above item No. 87 above but in riser of steps, skirting, dado and pillars including rendering 10mm thick in cement mortar 1:3 complete all as specified and as directed.

M&L colored Elevation tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with 20mm thick screed bed in CM 1 :6 complete all as specified and as direted.

M&L for chamfering half rounding of edges of cudappa/ granite slab as in platform vertical support and edge poloshing complete all as specified and as direted.

Taking up or down steel tubing 15 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and as direted.

Taking up or down steel tubing 20 mm dia and connections, including cleaning for re-fixing or removal to store

S&F 15 mm bore GI tubing medium grade to walls, ceiling or laid in floors with all fittings complete all as specified and as direted.

S&F 20 mm bore GI tubing medium grade to walls, ceiling or laid in floors with all fittings complete all as specified and as direted.

S&F in repairs 10 ltrc cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and as direted.

S&F in repairs vitreous china squatting pan Orissa pattern 580 X 440 mm long with integral foot rest , S or P trap including connection to trap and to flushing pipe etc complete including making good to floor complete all as specified and as direted.

S&F in repair 15mm dia CP bib taps, fancy, Cast copper alloy with crutch or butterfly handle, screwed for iron pipe fixed complete all as specified and as direted.

S & F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed 15 mm size all as specified and directed.

S&F in repairs bib cock with wall fange all as specified and directed Make : Essco by Jaquar (Cat No:APR-101037) or equivalent complete all a specified and directed.

S&F in Repairs Angular Stop Cock with wall Flange Make : Essco by Jaquar (APR-101053) or equivalent complete all a specified and directed.

S&F in repairs 2 way bib cock with wall fange all as specified and directed Make : Essco by Jaquar (Cat No:APR-101041) or equivalent complete all a specified and directed.

S&F in repair Overhead shower 125 mm dia round shape Single flow (ABS body chrome Plated with Gray Face Plate) with Rubit cleaning System incl shower Arm 240mm long complete all as specified and directed Make : Essco by Jaquar (Cat No- EOS-542 A& ALE-536A) or equivalent

S&F in repairs Wash Hand basin of size 530x445x195mm white including fixing accessories complete all as specified and directed Make : Essco by Jaquar (Cat No- ECS-WHT-601) or equivalent

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with pIngs including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size410mmx330mmx160mm complete all as specified and as direted.

S&F in repairs Bowl with cistern for couple WC with PP normal close slim seat cover, Hinges, Fixing accessories and accessories Set, size 395X680X770mm, P/S Trap-180mm/ 220mm (Essco by Jaquar Cat No AIS-WHT-101751S220NPPSM/ AIS-WHT-101751P180NPPSM) or equivalent complete all a specified and directed.

S&F in repairs stainless steel kitchen plate rack of size 36x24x10 Inch complete with fixing arrangement complete all as specified and directed.

S&F Hand shower (health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & wall Hook with NRV (back flow Preventer) all as specified and directed Make : Jaquar (Cat No ALE-ESS-593) or equivalent.

S&F in repairs single lever Basin Mixer without popup waste with 450mm Long braided hoses all as specified and directed. Make : Essco by Jaquar (Cat No:APR-101011B) or equivalent complete all a specified and directed.

S&F in repairs single lever Sink Cock with Swinging spout(wall mounted Model)with wall flange all as specified and directed. Make : Essco by Jaquar (Cat No:APR-101347N) or equivalent complete all a specified and directed.

S&F in repairs Toilet Paper holder fixed to walls with chromium plated (CP) brass screws Make Jaquar (AEC-1151) or equivalent.

S & F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repairs glass shelf 500x60x6mm (with ABS brackets) complete all as specidied and directed. Make- Prayag , CAT No.: BEA-47 or equivalent

S&F Corner glass Shelf (with Bracket) fixed to walls with chromium plated (CP) brass screws Make Jaquar (.ACN-CHR-1173) or equivalent.

S&F Soap dish (polycarbide) fixed to walls with chromium plated (CP) brass screws Make Essco by Jaquar (AEC-1133) or equivalent.

S&F in repair wall cabinet Mirror (500x400Appx) Make- Prayag , CAT No.: 556 or equivalent

S&F in repairs towel rack complete all as specidied and directed. Make- Essco by Jaquar (Cat No:AEC-1181A) or equivalent

S&F in repairs towel Rail complete all as specidied and directed. Make- Essco by Jaquar (Cat No:AEC-1111B) or equivalent

S&F in repairs towel ring complete all as specidied and directed. Make- Essco by Jaquar (Cat No:AEC-1121) or equivalent

Dismantling water tanks of capacity exc 250 and n exc 500 ltrs and removing to stote complete all as specified and as direted.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltrs.20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed.

Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs and removing to stote complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltrs.20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including 6 mm dia 50 mm long fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut) with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including PVC valveless, syphonic action type, flushing cistern 10 LTRS CAPACITY, low level, white, with inlet, ball valve, float and handle including brackets fixed in repairs with 32 mm PTMT Flush pipes to pedestal pan, including all joints complete all as specified and as direted.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/wall 75mm bore complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) junction double, (double T), equal or unequal of 75mm bore complete all as specified and as directed.

S&F PVC (SWR) junction double, (double T), equal or unequal of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F for PVC (SWR) vent cowl suitable for 75mm dia PVC pipe complete all as specified and as directed.

S&F 100 mm Cast iron nahani, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F PVC 100 mm gully, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Dismantling of AC (Corrugated or semi corrugated etc) sheets in roof covering including ridges complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane ganbies, rails and fastenings and heavy bracket framing (lleam, tee, angle, charmel or flat sections) including distance pieces, cleats etc. conforming to IS 1161-1979 grade Fe 410W (Gde E-250) quality A complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed alusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for 5mm thick rendering on fair faces of brick work or concrete surfaces in CM ( 1:3 ) finished even and smooth (without using extra lime or cement) on Ceiling complete all as specified and as directed.

M&L for applying two coats of oil bound distemper on ceiling oaver a coat of primer including preparation of newly plastered surfces complete all as spceidied and as directed.

S&F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L for 12 mm thick designer water proof PVC MDF Jalli fixed in frame complete all as specified and directed. ( Frame measured seprately)

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 63,340.00]

DIVESH HARISH SIRIAH

M/s T.S.JOHAR

M/s Rahul Traders

AK CONSTRUCTION

Devika Constructions

dhanshree enterprises

M/s DS Khekde

S R BUILDERS

Bidder Name

dhanshree enterprises

khushal constructions

M/s Rahul Traders

M/s DS Khekde

Devika Constructions

AK CONSTRUCTION

M/s T.S.JOHAR

DIVESH HARISH SIRIAH

S R BUILDERS