Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹80.9 L
EMD Value
₹80,900
Closing Date
26 Aug 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Civil Works for Proposed Modification to Time Gate at Helicopter Division, HAL HC Including Electrical , IT related works.
7684
TENDER NOTICE/NCP/03/24-25
Works
Contract Section Civil-FMD-Bangalore
₹1,180
₹80,900
26 Aug 2024
30 May 2024
30 May 2024
26 Aug 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Demolition of cement concrete of any description in ground floors and pavings, breaking to pieces of any thickness or volume including necessary cutting of reinforcement if any, stock piling at designated location and disposal of demolished material (Except saleable materials) outside HAL to a distance not exceeding 5 km and stacking servicable and unservicable materials seperately, etc., all complete as directed by the Engineer-in-Charge. Note: 1.The entire stretch cannot be given at one go. An mutually agreed length of stretch will be given for execution from time to time. The length of stretch for execution depends on various factors like climate, security etc. 2. Proper Barricading needs to be provided over the stretch of dismantling before commencement of dismantling.
Demolition of soling and sub bases of any description including stock piling at designated location and disposal of demolished material (Except saleable materials) outside HAL to a distance not exceeding 5 km and stacking servicable and unservicable materials seperately, etc., all complete as directed by the Engineer-in-Charge.
Dismantling of existing brick masonry work, taking out from walls built in cement mortar of any description at any height and position with requried scaffolding etc., and shifting reusable materials to maintenance stores for reconstruction purpose and disposal of demolished material (Except saleable materials) outside HAL to a distance not exceeding 5 km and stacking servicable and unservicable materials seperately, etc., all complete as directed by the Engineer-in-Charge.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, stacking it in the area as directed by the Engineer-in-Charge, fabrication if required and refixing it in the position whenever required.Removing building materials etc. (Other than spoil payable under items 03028 to 03031 in Section-3-Earthwork) to a distance of 100m or under, beyond the lead included in the rates, including loading,unloading and stacking at the destination, etc., all complete as directed by the Engineer-in-Charge.
Dismantling/Removal of structural steel work including doors, gates,coulmns,purlins,plates but excluding framed truss etc., stacking it in the area as directed by the Engineer-in-Charge, fabrication if required and refixing it in the position whenever required.Removing building materials etc. (Other than spoil payable under items 03028 to 03031 in Section-3-Earthwork) to a distance of 100m or under, beyond the lead included in the rates, including loading,unloading and stacking at the destination, etc., all complete as directed by the Engineer-in-Charge.
Earthwork excavation over areas not exceeding 1.5 m deep in all kinds of soft / hard soil for foundations, footings, column pedestals etc., and getting out including clearing away all grass, vegetation, saplings, shrubs, undergrowth, roots and trees not exceeding 30 cm girth, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, pumping, bailing out of water so as to keep foundations in dry condition at any stage of work and draining water away from the site of work without any extra payment, levelling, ramming the bottom of excavation, stacking useful materials as directed and disposing unwanted materials outside the site area to a distance not exceeding 50 m, with all labour, tools & tackles, plant & machinery, hire & fuel charges etc., all complete as per drawings and as directed by the Engineer-in-Charge.
Earthwork excavation over areas exceeding 1.5 m but not exceeding 3.0 m deep in all kinds of soft / hard soil for foundations, footings, column pedestals etc., and getting out including clearing away all grass, vegetation, saplings, shrubs, undergrowth, roots and trees not exceeding 30 cm girth, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, pumping, bailing out of water so as to keep foundations in dry condition at any stage of work and draining water away from the site of work without any extra payment, levelling, ramming the bottom of excavation, stacking useful materials as directed and disposing unwanted materials outside the site area to a distance not exceeding 50 m, with all labour, tools & tackles, plant & machinery, hire & fuel charges etc., all complete as per drawings and as directed by the Engineer-in-Charge.
Earthwork excavation in trenches for foundations, pipes, cables, drains etc. not exceeding 1.5 m in width and excavation for manholes, shafts, pits, wells and the like not exceeding 10 m² in plan upto 1.5 m deep in all kinds of soft / hard soil and getting out including clearing away all grass, vegetation, saplings, shrubs, undergrowth, roots and trees not exceeding 30 cm girth, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, pumping, bailing out of water so as to keep foundations in dry condition at any stage of work and draining water away from the site of work without any extra payment, levelling, ramming the bottom of excavation, stacking useful materials as directed and disposing unwanted materials outside the site area to a distance not exceeding 50 m, with all labour, tools & tackles, plant & machinery, hire & fuel charges etc., all complete as per drawings and as directed by the Engineer-in-Charge.
Returning / refilling with useful excavated soil, free from salts, organic or other deleterious matter in foundations, trenches, footings etc. (Other than black cotton soil & rock etc.), spreading in layers not exceeding 25 cm thick, watering, breaking / removing clods exceeding 50 mm, ramming and consolidation etc., with all labour, tools & tackles, plant & machinery, etc., all complete as directed by the Engineer-in-Charge.
Removing / transporting the surplus excavated earth including debris, vegetation waste etc., outside HAL to a distance of 5000m including loading, unloading, depositing, spreading, levelling etc., after obtaining due clearance from the Engineer-in-Charge, etc., all complete as directed by the Engineer-in-Charge.
Supplying and spreading granular sub base (GSB) of specified thickness with closely graded granite aggregate in mechanical mixtures at OMC, spreading in layers and compacting with power rollers / vibromax/Dinopack as applicable including watering etc. The quoted rate shall include preparing the surface, finishing, watering, rolling, ramming in inaccessible areas etc., with all necessary materials, labour, tools and tackels, plants, etc., all complete as per specifications and as directed by the Engineer-in-Charge.
Supplying, mixing and placing plain cement concrete (1:4:8) of required thickness using 40 mm and down graded hard stone/granite aggregate in accordance with IS 456 in foundations, mass concrete, sub bases, floors, pavings and other similar works including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., all complete as directed by the Engineer-in-Charge.
Supplying, mixing and placing plain cement concrete (1:2:4) with 20 mm and down graded aggregates in copings, cills, string courses, hold fasts for doors,drains, channels, trenches etc at all levels including necessary formwork, weathering, rounding or chamfering and throating, mixing, transporting, consolidation, levelling, curing, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., all complete as directed by the Engineer-in-Charge.
Supplying, mixing and placing in position, controlled grade reinforced cement concrete M 25 with 20 mm and down graded granite aggregate at all levels for the sub items mentioned below including transporting, consolidation, levelling, curing, scaffolding, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, hacking the surface to secure plastering where required, aligning and placing in position foundation bolts as per drawing, etc., all complete as directed by the Engineer-in-Charge. Note : (i) Reinforcement & formwork shall be paid separately. (ii) If day concrete exceeds more than 6 m³, ready mix cement concrete shall be used. (iii) All RCC works to be carried out by using OPC 43 grade cement. (iv) Mix design to be obtained from Govt. / NABL laboratory for site batching concrete. (v) RMC shall be from approved manufacturer having minimum cement content as per IS 456 and the same shall be approved by HAL before execution.
All works up to plinth level as per drawings/instructions of EIC.
All work above plinth at all levels as per detailed drawings/instructions of EIC.
Supplying and mixing integrated water proofing compound conforming to IS 2645 in cement concrete/cement plaster works in proportions as specified by the manufacturer's specification, etc., all complete as directed by the Engineer-in-Charge.
Blockwork with 200mm thick precast cement concrete solid blocks conforming to IS 2185 (Part 1) having minimum average compressive strength of 4 N/mm² and density not less than 1800 kg/m³ built in cement mortar 1:6 (1 cement : 6 coarse sand) for walls at all levels including necessary formwork, curing, finishing, making or leaving holes & chases and making good etc., all complete as directed by the Engineer-in-Charge. The blocks shall be manufactured using a minimum of 40% of fly ash by volume of materials, etc., all complete as directed by the Engineer-in-Charge.
Blockwork with 100 mm thick precast cement concrete solid blocks conforming to IS 2185 (Part 1) having minimum average compressive strength of 4 N/mm²/(1:2:4) ratio and density not less than 1800 kg/m³ built in cement mortar 1:4 (1 cement : 4 coarse sand) for walls at all levels including necessary formwork, curing, finishing, making or leaving holes & chases and making good etc., all complete as directed by the Engineer-in-Charge. The blocks shall be manufactured using a minimum of 40% of fly ash by volume of materials, etc., all complete as directed by the Engineer-in-Charge.
Formwork by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc., all complete as directed by the Engineer-in-Charge for the sub-items mentioned below. Note: Formwork material is contractor's own property and shall be removed after completion of work.
For foundations including rafts, footings, foundation beams, plinth beams, pedestals etc.
For lintels, beams, tie beams, cantilevers, bressummers etc.
For columns, pillars, brackets, piers, posts, struts etc.
Supplying, fabricating and fixing second class hard wooden plain, solid, straight chowkats and frames, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixed to wall, etc., all complete as directed by the Engineer-in-Charge.
Supplying, fabricating and fixing in position 40 mm thick flush shutter conforming to IS 2202 (Part I), block board solid core type with plywood face panels commercial type on both sides, including provision of internal wood lipping, rebates, suitable blocks for taking mortice locks, latches or other fittings, fitting to frames/chowkats, etc., all complete as directed by the Engineer-in-Charge. Note: Fittings / hardware shall be paid separately.
Supplying and fixing the following fittings / hardware of approved make and design to door with all required screws, bolts, nuts, washers, etc., all complete as directed by the Engineer-in-Charge.
Polished brass barrel tower bolts 300 mm long with barrel of extruded sections of brass and rolled or drawn brass bolt
Polished brass barrel tower bolts 200 mm long with barrel of extruded sections of brass and rolled or drawn brass bolt
Brass sliding door bolt (Aldrop) 200 mm long with sand or die-cast brass hasp, staple (Bolt type) and rolled or drawn brass bolts
Extruded brass butt hinges 125 mm long with brass hinge pin, bright polished
Polished extruded brass handles fabricated type 150 mm long
Brass mortice lock (Vertical type) 100 mm size with min. 4 levers and finished bright
Floor door stopper of brass body and tongue with hard drawn steel spring, overall length of cover plate 150 mm
Mild steel hold fasts
Supplying, fabricating and fixing Industrial louvers using corrosion resistant galvalume sheet, etc., all complete as directed by the Engineer-in-Charge. Note: The quoted rate shall be for the entire work and nothing extra shall be paid on this account.
Supplying, straightening, fabricating and fixing steel reinforcement of HYSD TMT bars of not less than Fe 500 conforming to IS 1786 for all concrete reinforcment members / works including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it, etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note : Only authorized laps, chairs etc. shall be considered for measurement.
Supplying, fabricating and fixing in position M.S. framed work such as grills, gratings, ladders, railings etc., with ends of bars shouldered and/or riveted, welded etc., of approved design using standard sections, including necessary cutting, welding, embedding in concrete, masonry, etc., all complete as directed by the Engineer-in-Charge.
Supplying, fabricating, hoisting and fixing in position M.S. tubular work to the required profile made up of standard steel sections including foundation bolts ,pipes,plates, flats, bolts, nuts and washers etc., cutting to dead length where required, notching, drilling, riveting/welding, wedging, plumbing and painting the members with two coats of synthetic enamel paint over a coat of approved zinc chromate primer, preparation of surface, etc., all complete as directed by the Engineer-in-Charge..
Supplying and laying granite min. 25 mm thick, machine cut, table rubbed and polished, for steps including treads & risers and similar works, bedded and jointed with grey cement slurry at 3 kg/m² and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone, over a screed of cement mortar (1:3) 20 mm thick including cutting, grinding and polishing, round nosing and cutting 3 nos. of anti-slip grooves wherever necessary, etc., all complete as directed by the Engineer-in-Charge. Note: Quoted rate shall be inclusive of screed, pointing etc.
Supplying and laying granite min. 20 mm thick, machine cut, table rubbed and polished, for flooring, landings etc., bedded and jointed with grey cement slurry at 3 kg/m² and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone, over a screed of cement mortar (1:3) 20 mm thick including cutting, grinding and polishing, etc., all complete as directed by the Engineer-in-Charge. Note: Quoted rate shall be inclusive of screed, pointing etc.
Providing, applying and laying cement mortar (1:6) plastering 15 mm thick on brick/concrete surfaces, finished even and smooth with trowel for internal walls etc., with necesary chicken wire mesh for junctions, labour, scaffolding, curing, tools and tackles, etc., at all heights, etc., all complete as directed by the Engineer-in-Charge.
Providing, applying and laying 20mm thick water proof cement plaster work in two coats for external areas as directed. First coat 12 mm thick in cement mortar (1:6) made rough to recieve top coat, second coat 8 mm thick in cement mortar (1:4) mixed with water proofing compound (200 ml per 50 kg of cement or as per manufacturer's specifications), final surface finished with a floating coat of neat cement after necessary preparation of surface, at all levels with necesary chicken wire mesh for junctions,materials, labour, scaffoldings, curing, tools and tackles, plants etc., threading if any as directed, etc., all complete as directed by the Engineer-in-Charge. Note: Water proofing compound shall be paid separately.
Painting newly plastered interior surfaces with two coats of low VOC premium plastic emulsion with acrylic base conforming to IS 15489, of approved make, colour, shade, tint & pattern at all levels, over a coat of approved alkali resistant primer including preparing the surface by removing loose dirt and any organic growth, smoothening the surface by using suitable emery paper, filling crevices and finishing even by applying one full coat of putty, necessary scaffolding, etc., all complete as directed by the Engineer-in-Charge.
Painting newly plastered external surfaces with two coats of low VOC premium weather proof exterior acrylic emulsion paint of approved make, colour, shade, tint & pattern at all levels, over a coat of approved acrylic primer including preparing the surface by removing loose dirt and any organic growth, filling of cracks with white cement putty or Plaster of Paris, necessary scaffoldingetc., all complete as directed by the Engineer-in-Charge. Note: The paint shall have anti-algal, anti-fungal, UV resistant & anti-tarnishing qualities with 100% acrylic base and silicon or elastomeric additives.
Painting steel surfaces of any description with two coats of synthetic enamel paint conforming to IS 2932, of approved colour and manufacture over a coat of zinc chromate primer including preparation of surface by wire brushing/sand papering and wiping the surface clean with mineral solvents to remove grease and hard marks etc., applying metal paste for steel surface before painting the first coat etc., all complete as directed by the Engineer-in-Charge. Top coat of desired shade shall be applied after the undercoat has thoroughly dried and rubbed with fine grade of abrasive paper to ensure smooth and even surface, free from brush marks, etc., all complete as directed by the Engineer-in-Charge.
Painting wooden surfaces of any description with two coats of synthetic enamel paint conforming to IS 2932, of approved colour and manufacture over a coat of approved primer including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth and even surface, applying knifing paste filler putty before painting the first coat, etc., all complete as directed by the Engineer-in-Charge.
Supplying and fixing min. 10 mm thick multi-wall polycarbonate sheet to existing MS framework including, fasteners, drilling, etc., all complete as directed by the Engineer-in-Charge.
Supplying and fixing the Plain galvalume gutter around 1200mm girth, bend to shape, accessories for roofing with the same specifications or as per manufacturer's reccomendation including all necessary fasteners, washers, sealants, etc., all complete as directed by the Engineer-in-Charge.
Supplying, fixing, testing and commissioning the 110mm dia PVC pipes of 6 kg/cm² SWR grade and of approved make with rubber ring joints conforming to IS 5382, jointed together with solvent, on walls, including all necessary fittings & specials, bends, branches, sockets, clamps, pipe cutting and wastages, cutting and making good the walls, connecting to existing lines, etc., all complete as directed by the Engineer-in-Charge.
Supply and fixing LED street light fitting 90 watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
Industrial high bay light fittings Photon Ultra Plus 140 lumens/W Crompton greaves make cat no : CIP-311-4057-HL4-CP-NSG
Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete
Supply and fixing Modular switch 1 way 6A, 1 module MODULAR SWITCHES
Supply and fixing Socket, 6A - 2/3 pin combined 2 module, MODULAR SOCKETS
Supply and fixing MODULAR METAL FLUSH BOX Ditto- but 4 module with plate
Supply and fixing MODULAR METAL FLUSH BOX -Ditto- but 6 module with plate
Supply and fixing SHEET METAL ENCLOSURES FOR DB'S WHEN MCBs TO BE USED Single pole & neutral double door 16 way with 200 amps rated bus bar
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning
Supply and fixing MOULDED CASE CIRCUIT BREAKER (M.C.C.Bs.) MCCBs 415V, 16KA, 4 Pole 63A
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc Ditto, but 25x4mm galvanised iron strip running meter
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers
Supply and fixing stepped type electronic fan regulator flush type on the existing
Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR is PVC insulated copper conductor, single core cable in surface/ recessed as required 2x2.5 sq. mm + 1x2.5 sq. mm earth wire ( color Red black & green)
Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR is PVC insulated copper conductor, single core cable in surface/ recessed as required 2x 4.0 sq. mm + 1x4.0 sq. mm earth wire
Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.
Junction boxes (1 to 4 way )
Lightning arresters expulsion type complete with all fittings, 30 kilo amp discharge capacity, distribution class
CAT 6 Cable Box 305Mtrs.
6/2 Racing Case
1 Inch Conduit Pipe
CAT 6 I/O Dual Information Outlet with Back Box & Face Plate
I/O Keystone
Gang Box [Metal Back Box Dual]
JPU Fully Loaded 24 Port CAT 6 UTP Jack Panel
Cable Manager 24 Slot
Installation, Termination, Fixing of 24 Port Jack Panel, Dressing, Labelling of Jack Panel, etc., with Accessories
Termination of I/O Nodes at User side with Back Box, Face Plate with Labelling and Testing
CAT 6 UTP Patch Cord 1 Meter
Laying of CAT 6 Cable in Supplied Conduit, Casing and Caping
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN03.pdf
TENDER_DOCUMENT • 2.51 MB
06PQ.pdf
TENDER_DOCUMENT • 0.21 MB
06Civildrawing.pdf
TENDER_DOCUMENT • 2.18 MB
06ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
06PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
06Checklist.pdf
TENDER_DOCUMENT • 0.16 MB
06TB.pdf
TENDER_DOCUMENT • 2.58 MB
06AMD.pdf
TENDER_DOCUMENT • 0.09 MB
06PB.pdf
TENDER_DOCUMENT • 0.38 MB
06Undertaking.pdf
TENDER_DOCUMENT • 0.59 MB
06PBF.xlsm
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .