GE (I) R AND/CHD-73/2021-22

Amount

Material and labour for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil, greasy spots and applying one coat of white wash on walls complete all as specified and directed.

All as per serial item No 1.00 above but on ceiling surfaces.

All as per serial item No 1.00 above but two coat of white wash to wall surfaces.

All as per serial item No 1.00 above but two coats of cement based paint on wall.

Material and labour for preparation of old decorated distempered surfaces of walls and apply one coat of oil emulsion distemper to walls complete all as specified and directed.

Material and labour for washing rubbing down and stopping old treated plastered surface of walls including scraping and applying two coat of oil bound distemper over a layer of birla putty complete all as specified and directed.

Material and labour for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete as specified and directed.

Writing letters or figures (IN BLOCK, ROMAN, ITALIC OR INDIAN) not exc 30 cm height with synthetic enamel paint to match existing work complete as specified and directed.

Material and labour for preparation of old decorated surfaces of walls finishing walls with textured exterior paint of required shede : New work ( Two or more coates applied @3.28 ltr /10sqm) over and including priming coat of exterior primer applied @ 2.20 kg /10 sqm

Material and labour for preparetion of plastered or unplastered old decorated surface of wall includind pillaster and cornices etc and applying one coat of plastic emulsion paint on wall complete all as specified directed.

Material and labour for preparetion of plastered or unplastered old decorated surface of wall includind pillaster and cornices etc and applying two coat of plastic emulsion paint with over a layer of Birla Care Puttey on wall complete all as specified directed.

Material and labour for 3mm thick wall care putty on wall surfaces complete all as specified and directed

Material and labour for preparetion of plastered or unplastered old decorated surface of wall includind pillaster and cornices etc and applying one coat of plastic emulsion paint on ceilling complete all as specified directed.

Material and labour for applying one coat of exterior acrylic emulsion (Weather Coat- antifungal) paint including preparation by mechanical means (Spray gun) on old treated tiles surfaces complete all as specified ans directed by Engr-in-Charge (Tint and shade as approved by the GE)

Material and labour for applying two coats of exterior acrylic emulsion (Weather Coat-antifungal) paint including preparation by mechanical means (Spray gun) over a coat of exterior primer on plastered surfaces complete all as specified ans directed by Engr-in-Charge (Tint and shade as approved by the GE)

Taking down cement plaster of any description/situation from brick wall/concrete surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete including scafolding all as directed : (Note- Height max 12 Metre ), Reterieved material/debries dispossedoff in low line area at any distance)

Material and labour for rendering 15 mm thick cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces complete all as specified and directed.

Material and labour for rendering 15mm thick cement plaster in cement mortar (1:4) on wall for fair faces of brick work or concrete surfaces complete all as specified and directed.

Material and labour for preparation newly plastered surfaces and applying two coats of cement base paint on plastered surfaces complete all as specified and directed.

Material and labour for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar 1:3 complete all as specified and directed.

Dubbing put average 20mm thick on irrigular face on brick work or concrete surfaces in cement mortar 1:4 finished even and rough including scafolding complete all as specified and as directed. (Note- Height max 12 Metre )

Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 mix with liquid water proofing compound finished even and smooth without using extra cement including scafolding complete all as specified and directed. Note ( (Note- Height max 12 Metre )

Demolition of cement concrete of any descriptionand in any position not otherwise specifically provided for all as specified and directed.

Demolition of mud in roofs, any thickness,including plastering nd leeping(weather full thickness removed or only a part thereof).(Note : Reterieved mud/debries dispossed off in low line at any distance ) all as specified and directed.

Demolition of Bricks pointed in any cement mortor (laid flat or on edge) or brick tiles in floors,Channels, kerbs, aporons etc complete all as specified and directed.

Material and labour for providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and directed.

Material and labour for screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 laying floor finishes complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3.0 Kg/ sqm including 10mm thick flooring in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately).

Material and labour fo applying bituminous primer on roof surfaces @ 0.40 ltr/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm and provide modified polymeric five layered APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polythylene film. Min wt of memebrane will be 3.5 kg/sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm all as specified and directed by Engr-in-Charge.

Material and labour for machine pressed cement concrete tiles 40cm x40cm x25mm thick set jointed in neat cement slurry in floors with grey cement and no pigement complete all as specified and directed with ISI marked.

Material and labour for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation newly plastered surfaces and applying two coat of oil bound distemper over a layer of birla putty complete all as specified and directed.

Material and labour for cleaing and removing all scale and dirt etc, from tanks exceeding 500 & n.exc 1000 ltr capacity of tank from mouths of circulating pipes complete all as specified and directed.

Material and labour for cleaing and removing all scale and dirt etc, from tanks exceeding 250 & n.exc 500 ltr capacity of tank from mouths of circulating pipes complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore.

Supply and fixing for GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors.

Re-fixing old steel tubing and connections in new or old position (walls, ceiling, floors etc,.) of sizes 15 mm dia

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth.

Disconnecting existing tanks of capacity exc. 500 & n exc. 1000 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position.

Supply and fixing for 500 ltrs capacity rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Supply and fixing for 1000 ltrs capacity rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified.

M/S MATLOOB AHMED

JOGINDER NATH GUPTA AND SONS

jaswant singh