REPAIR, REPLACEMENT AND MAINTENANCE OF DEFECTIVE ITEMS OF SECURITY LIGHTS, FIRE DETECTION AND ALARM SYSTEM, INTERNAL ELECTRIC SUPPLY SYSTEM UNDER GE (AF) LOHEGAON AT AF STN PUNE

Amount

M&L for Carrying out day to day comprehensive maintenance of OTM accn and domestic area & North of runway area internal eletrification complaints by Collecting from complaints cell daily and repairs in situ or attending of complaints of OTM accn & domestic area. After rectification the specified complaint job card shall be return on same date. Nature of defects such as repair/replacement of switches, fuse wires, DB, MCB (light/ power), lamp holder (bracket, pandent, batten) bell/buzzer, push button, ceiling rose, capacitors and other similar electrical items/fittings, repairing of fan and geysers etc including providing of small pieces of electrical wire of size 1.5 sqmm to 10 sqmm single core/ two core and length not exceding 1.5 mtrs complete all as specified and directed by Engineer-in-Charge (Note :- (i) any accessories as mentioned above found unserviceable shall be measured and paid separtely under respective items of this Sch. However any minor requirement essential for making overall system serviceable is deemed to be included in the quoted rate of this item.

Note for Item No 1 : Contractor's rep will visit the office twice a day (0930 Hrs and 1430 Hrs) to collect the day to day complaints of any nature/type. (ii) Penalty for not rectifying the defect in time(within 72 hrs) will be charged to contractor and the amount of penalty @ Rs 100/- per complaint will deducted from the due payment of contract. Nature of complaints rectification in respect of defects which requires more than 72 hrs to complete will be decided by Engr-in-Charge & GE on his satisfaction for recovery issue. (iii) Manpower requirement for attending and completing day to day complaints will be minimum (supervisor -01 No Electrician skiled -02 no, Electricial helper -02 Nos & addition manpower will be required depending upon the number of complaints which may vary day to day and cost of same is deemed to be included in quoted rate. Contractor is advised to quote accordingly. (iv) Complaints will be treated as rectified only after user's "Satisfactory job slip duly signed "will be produced by contractor to concerned JE E/M/Rep of MES and Records of the same shall be maintain by the Contractor .

(v) Old material obtained from replaced items under this item shall be contractor's property and will be measured as Schedule of credit. and well be Issued to contractor at the time of RAR payments. (vi) Cost of minor spares i.e, insulation tape, lugs, thimbles etc are deemed to be included in the quoted rate. Labour required to carryout the maint / repairs including testing and commissioning shall be deemed to be included in item rate as quoted by the contractor.Items replaced shall be measured and paid seperately . (vii) Cost of T&P i.e, ladders, tools, brazing, welding, soldering required and transportation is deemed to be included in quoted rates. (viii) Making good the area / cleaning the area will be mandatory for the contractor & failing which penalty of Rs. 500/- will be charged at each stance (ix) Separate men power shall be provided for OTM accn &Domestic Area & North of Runway area regularly (x) Number of complaints will be considered as one occupent of each SMQ / Each OTM Bldg on one MES job Card on same date/day. No repeated complaints will be counted for which the repairs already done for same occupant.

M & L for repair/replacement of the following items if required against Ser item No.01

Supply and fix switch piano flush type 5 A one way.

Supply and fix socket 2 in one 5 Pin 5 Amps.

Supply and fix switch socket combination multipurpose 3 pin 6/16 Amps.

Supply and fix switch socket combination multipurpose 3 pin 5 Amps.

Supply and fix switch piano flush type 15 Amps

Supply and fix Socket out let 2 in 1, 3 pin 5 and 15 Amps

Supply and fix Piano switch bell push type switch 5 A.

Supply and fix bell electric 230V single pole complete as directed.

S & F Fan Regulator electronic step type 100 W complete as directed

S&F angle / batten holder insulated body with back plate for batten fittings

Supply and fix ceiling rose surface type bakelite/PVC three terminal 65x50mm

S & F PVC rectangular box for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep

Ditto all as per Ser Item No 14.00 above but 175 x 100 x 50 mm

Ditto all as per Ser Item No 14.00 above but 200 x 150 x 50 mm

Fixing only and connecting electric meters Issued Under Sch "B" free for fixing

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fix high quality indoor Surface and wall mounted LED batten 20 Watt, provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver having THD<10%. complete with all accessories internally pre-wired and including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal.

Supply and fix Energy efficient recess mounted LED panel fitting 36 Watt suitable for 2x2 grid in white colour with high quality diffuser for uniform light & high Efficiency. Made from CRCA sheet, Pre-coated white color. Separate replaceable electronic driver, lumen constant of 5700/6500K colour temperature with current electronic connections as directed

Supply and fix sheet metal enclosure MCB DB double door SPN 12 way 230 V with neutral link and with 200 A bus bar

Supply and fix sheet metal enclosure MCB DB double door SPN 8 way 230 V with neutral link and with 200 A bus bar

Supply and fix sheet metal enclosure MCB DB double door SPN 4 way 230 V with neutral link and with 200 A bus bar

Supply and fix MCB SPN 40 Amp, 230 volt 'C' series complete

S&F MCB SP 240 volt 6 to 32 A 'C' series complete

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 225/230 mm sweep with, blades, and frame and louver complete all as directed

Supply and fix wall fan AC single Phase. 230V of size 400 mm sweep complete all as directed

M & L for sub main wiring with two runs of single core 4.0 Sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 650 / 1100 V grade with colour code and one run of 4 Sq mm ( 22 / 0.3 mm ) single core FRLS PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor including PVC casing & caping all as directed.. ( Note :Three runs of 4.0 Sqmm copper cable,one run of casing & Caping shall be measured & paid as one length.)

M & L for sub main wiring with two runs of single core 6.0Sq mm Flame retardant PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 6.0 Sq mm single core Flame retardant PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including casing & caping all as directed and specified . ( Note:- Three runs of 6 Sqmm copper cable including PVC casing & caping shall be measured & paid as one length )

M & L for sub main wiring with two runs of single core 10.0Sq mm Flame retardant PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 10 Sq mm single core Flame retardant PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including casing & caping all as directed and specified . ( Note:-Three runs of 10 Sqmm copper cable including PVC casing & caping shall be measured & paid as one length )

Ditto all as per Ser Item No 30.00 above but 2 x2.5 sq. mm +1x2.50 sq. mm as earth wire

S & F PVC Casing & Capping with connected accessories

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm

Taking down ceiling fan single phase 240 V 1200 mm /1400mm sweep from the existing position including disconnecting supply cable from ceiling rose / connector opening ceiling fan carefully and taking out worn out/defective spare parts such as bearing/ bush shaft , blades, split pin condenser rubber reel nuts and bolts and washer etc cleaning and washing the bearings /bushs thoroughly and applying necessary lubricants etc and reassembling of ceiling fan after replacement of wornout parts and hanging in original position connecting and testing complete all as directed by Engr - in - Charge [Note :- Replacement of spares for ceiling fan shall be measured and paid seperately]

Ditto all as per Ser Item No 35.00 above but for exhaust fan 300 / 450 mm sweep

Ditto all as per Ser Item No 35.00 above but for wall mounted fan any sweep

Supply and fix ball bearing SKF 6201

Supply and fix ball bearing SKF 6202

Supply and fix ball bearing SKF 6203

S&F Gunmetal bush suitable for existing fans

Supply and fix capacitor 2.5 Mfd /3.15 mfd

Supply and fix capacitor 4 Mfd

Supply and fix rubber reel with nuts bolts and split pin for ceiling fan

Supply and fixing PVC unsheathed 3 core cable copper flexible wire 0.5 Sqmm size

M&L for rewinding of ceiling fans of 1200 / 1400 mm sweep with suitable size of copper winding wire of same gauge & number of turns complete with insulation all as directed by Engineer-in-Charge.

M&L for rewinding of exhaust fans of 300 / 380 / 450 mm sweep with suitable size of copper winding wire of same gauge & number of turns complete with insulation all as directed by Engineer-in-Charge.

S&F fan clamp suitable for ceiling fan complete as directed.

S&F fan blade suitable for existing wall mounting fan / exhaust fan complete as directed

Taking down Geyser 25/50 Ltrs from the existing position including disconnecting supply cable from connector opening geyser carefully and taking out worn out/defective spare parts such as Thermostat, appratus terminal plate, glass wool, element etc cleaning and reassembling of geyser after replacement of wornout parts and hanging in original position connecting and testing complete all as directed by Engr - in - Charge [Note :- Replacement of spares for geyser shall be measured and paid seperately]

Supply and fix thermostat suitable for geyser of any make and any size.

Supply and fix indicating neon lamps suitable for geyser of any make.

Supply and fix apparatus terminal plate assembly with provision of inlet and outlet copper tubing including nuts bolts and washers suitable for geyser of any type and any make.

Supply and fix PVC connecting pipe heavy duty 15 mm dia for inlet and outlet with brass coupling .

Supply and fix for glass wool suitable for any type and make for geyser

Supply and fix geyser element 1.5 KW suitable for 25 ltrs capacity.

Supply and fix geyser element 2 KW suitable for 25/50 ltrs capacity.

S&F Syphene assembly on existing geyser suitable for 25 Ltrs Geyer

Supply & fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cables stranded conductor flat or circular 10 Sqmm

Supply & fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cables stranded conductor flat or circular 6 Sqmm

Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge.

Taking down cearfully by unscrewing the unserviceable DB Boxes, MC distribution boards SP & TPN with porcelain cutouts etc all as directed.

Taking down the sub main wiring of any dia / sq mm on teak wood batten / PVC conduit GI earth wire all as directed.

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor Flame retardant PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor Flame retardant PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and open recessed type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets all a specified and directed

One light point controlled by one switch .

One Fan point controlled by one regulator/switch.

One 3 pin socket 5 A on independent board.

One 3 pin socket 5 A on the same switch board.

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor Flame retardant PVC insulated single core 1100 volts grade & with one run of 2.5 Sqmm single core copper stranded Flame retardant PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings / fixture etc and open recessed type Plastic Enclosure (Plastic Switch Board) ISI marked (IS 14782) for housing one 15 A Switch / sockets all a specified and directed

Supply & fixing round shape 15 watt 220 volts recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including conncting up with three core flexible copper conductor cable of suitable size complete

S&F VTPN 8 way IP 43 IK-09 with double door suitable for provision of MCCB 160 Amps, 25 KA 4 Pole and for housing of MCBs complete all as directed by Engineer -in-Charge.

S&F VTPN 4 way IP 43 IK-09 with double door suitable for Provision of MCCB 100 Amps, 25 KA, 4 POLE and for housing of MCB's complete all as directed by Engineer-in-Charge.

S&F Vertical double door Distribution board TPN 4 way 200 A rated busbar consisting of MCCB. 100A 4 pole 10KA - 1 No

S & F MCCB, 4P, 125 Amp, 16 KA incl nacessary cable luges complete all as specified and directed

S & F MCCB, 4P, 63 Amp, 16 KA incl nacessary cable luges complete all as specified and directed

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp

S&F MCB DB SPN 4 way IP-43 IK-09 with metal door suitable for housing MCBs complete all as directed by Engineer -in-Charge.

S&F MCB DB SPN 08 way IP43 IK-09 with metal door suitable for housing of MCBs complete all as directed by Engineer-in-Charge

S&F MCB DB SPN 12 way IP 43 IK-09 with metal door suitable for housing of MCBs complete all as directed by Engineer-in-Charge

S&F MCCB 160 Amp 415V, 25KA 4 Pole with thimbles/lugs and nut bolts all as required at site and directed by Engr-in-Charge

S&F MCCB 125 Amps, 415V 25KA 4 Pole with thimbles/lugs and nut, bolts all as required at site and directed by Engr-in-Charge.

S&F MCB SP 240 Volts, 10 KA C Curve MCB Sp 6 to 32 Amps, Complete all as specified and directed by Engr-in-Charge

S&F MCB SP 240 Volts , 10 KA C Curve MCB Sp 40 to 63 Amps.

S&F MCB DP 6 to 32 Amp 10 KA 240 V C Curve and electric connections with copper thimbles complete all as specified and directed by Engr-in-Charge

S&F MCB DP 40 to 63 Amps 10 KA 240 Volt C Curve and electric connections with copper thimbles complete all as specified and directed by Engr-in-Charge.

S&F in replacement of sheet metal enclosure with socket plug top single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 06 to 32 Amps

M & L for providing earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts, nuts, checknuts & washers of GI or steel and connecting to earth dolly all as shown in electrical plate No. 3 of SSR Part I of 1991 & testing complete including 15mm dia light grade GI pipe upto 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , funnel, wire mesh with GI watering pipe etc.

Supply & Fix in replacement Highbay LED Energy saving 80 W, environment friendly & robust High bay/Mediumbay LED IP 65 luminaire with high efficacy suitable for ceiling (Surface/Suspended) complete all as specified and directed

S&F in replacement of ceiling fan stator of size 1200/1400 mm sweep size match to existing fan rotor of any make as per site requirement all as specified

M&L for replacement of down rod complete of ceiling fan made of 15 mm dia MS pipe medium grade complete with bolts/Check nuts , washers etc upto 1.5 mtr cm long and all as directed by Engr-in-Charge including drilling, threading all as reqd at site.

M&L for rewinding of wall fans of 400/450 mm sweep with suitable size of copper winding wire of same gauge & number of turns complete with insulation all as directed by Engineer-in-Charge.

M&L for rewinding of Pedestal fans of 400/450 mm sweep with existng size and gauge size of copper winding wih same number of turns complete with new mica sheets/Paper, varnishing, heating and testing after rewinding complete all as direted by Engineer -in-Charge.

Taking down old unserviceable existing flood lights fitting and S&F (in Replacement) energy saving and environmental frindly long life exclusive innovative flood ight luminaries 70 W 230 V AC outdoor type with thermal management in multiple optics and equipped with IP-66 protection, with impact and corrosion resistant with LEDs as light source and lens embedded PC cover/toughened glass and impact resistance of IK07 and electronic driver fixed on high mast pole or any other place as required on site incl making all necessary arrangement for fixing complete with MS flat iron clamps (clamp shall be 40x50 mm MS flat), nuts and bolts and washers complete all as specified

Ditto all as per Ser Item No 89.00 above but 170/180 W complete all as specified and directed.

Ditto all as per Ser Item No 89.00 above but 300 W complete all as specified and directed.

Taking down old unserviceable existing street light fitting and S&F (in Replacement) energy saving and environmental frindly long life LED light fitting, 35 W 230 V outdoor type with high pressure die cast aluminum housing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics IP 65/IP66 road way luminaries with LEDs as light source and lens embedded PC cover/toughened glass and impact resistance of IK07 and electronic driver fixed on pole with and including suitable dia size bracket as per manufacturer recommendation, bracket 1.5 m long complete with MS flat iron clamps (clamp shall be 40x50 mm MS flat), nuts and bolts and washers painting the clamps with coat of aluminum paint over a coat of red oxide primer including connection complete all as specified.

Ditto all as per Ser Item No 92.00 above but 70 W complete all as specified and directed.

S&F CMRI certified LED flame proof tube light fitting 2x20 W, with driver & LED tube rod, IP 65 protection, including connecating up with three core flexible multi strand copper conductor of 1.5 Sq mm , with flexiblle metal conduit, including fabricating red oxide coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below perment ceiling, including anchor fastners, nut, bolts , hooks, chain etc.

S&F CMRI certified LED flame proof tubel light fitting 1x20 W, with driver & LED tube rod, IP 65 protection, including connecating up with three core flexible multi strand copper conductor of 1.5 Sq mm , with flexiblle metal conduit, including fabricating red oxide coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below perment ceiling, including anchor fastners, nut, bolts , hooks, chain etc.

S&F CMRI certifiedLED flame proof well glass light fitting 20 Wat, with diriver & LED IP 65 protection, including connecating up with three core flexible multi strand copper conductor of 1.5 Sq mm , with flexiblle metal conduit, including fabricating red oxide coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below perment ceiling, including anchor fastners, nut, bolts , hooks, chain etc.

S&F CMRI certified LED flame proof well glass Flood Light fitting 60 W with driver & LED IP 65 protection, including connecting up with three core flesbile multi strand copper conductor of 1.5 Sq mm , with flexiblle metal conduit, including fabricating red oxide coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below perment ceiling, including anchor fastners, nut, bolts , hooks, chain etc.

S&F flame proof WP rotory switach socket & plug conbination in LM 6 of capacity 16 Amps single phase and neutral with earth of

S&F flame proof WP rotory switch with cablle termination box in LMS

M&L for wiring comolete with 1.5 sq mm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 V grade conforming to IS 694 drawn through steel ERW conduit flame proof with flame proof fitting & Junction boxes, heavy grade ISI marked including necessary conduit accessories surface on wall, ceiling etc including 1.5 sq mm PVC insulated flame retardent copper conductor as in continous earth wire for one FLP light/fan point controlled one way metal clad switch of 5 Amps capacity complete all as specified & directed.

M&L for wiring comolete with 2.5 sq mm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 V grade conforming to IS 694 drawn through steel ERW conduit flame proof with flame proof fitting & Junction boxes, heavy grade ISI marked including necessary conduit accessories surface on wall, ceiling etc including 2.5 sq mm PVC insulated flame retardent copper conductor as in continous earth wire for one 3 pin socket 16 A on independent board complete all as specified & directed.

S&F Switch flame proof rotary type with termination box in LM6 , 16A single pole 250 V complete all as specified & directed.

S&F Flame proof switch socket & plg combined in LM6 cable terminaton box in LM6 16A 250V 2P+earth

S&F flame proof Junction box in aluminum alloy LM6 construction 4 way with 3/4" ET entries with connectors complete all as specified and directed.

S&F LED light fitting 1x16 w flame proof, CMRI certified recommended for gas vapour groop of IIA & IIIA

S&F Flood Light LED light fitting 60 W flame proof, CMRI certified recommended for gas vapour groop of IIA & IIIA

M & L for complete Checking, Opening , servicing, testing of existing fire alarm panel and find out defective part from fire alarm control four loop panel and taking out Unserviceable Part & carrying out repair/replacing of mother board. The existing panel is of make HOCHIKI, Make/Model No - HOCHIKI HFD HFPAP-IASLS complete all as specified & directed.

Supply , Instalation, testing commissioning in replacement 0 to 30 V, DC 100 VA Coil completed all as specified & directed for fire alarm Control Panel.

Supply , Instalation, testing commissioning in replacement RSP 120m- 24, 120Watt 24V DC 10 Amp Power Supply module completed all as specified & directed for fire alarm control Panel

Supply, Installation, testing and commissioning in replacement of Intelligent loop powered wall sounder which provide a ranges of tones with maximum output complete all as specified & directed

Material and labour for supply and fix in replacement armored fire cable copper conductor of size 1.5 sq mm two core FRLS in red color fixed on wall/roof with GI saddle complete all as specified and directed and directed by Engr-in Charge

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply & fix fans ceiling complete with electronic type regulator and accessories 230 V , 1400 mm sweep

Supply and fix exhaust fan steel body 380 mm sweep copper winding complete withframe and louvers shutter, voltage 230V, 50 Hz, RPM 1200 complete all as directed

Supply & Fix in replacement Recessed pressure die-cast aluminium luminaire fitting 18W suitable for ceiling cutout dia 175 mm round dia in powder coated white finished with drop down PC diffuser with optimized heat sink for efficent heat dissiption with replaceable electronic driver

sapana enterprises

Star Electrical

M/s Harshal Traders

K K ENGINEERING SERVICES

Yashwanti electricals

M/S SVOJAS ELECTROMECH ENTERPRISES