WELCOME MAINT TO OFFRS MD ACCN, SINGLE LIVING ACCN, MESSES AND UNIT GUEST ROOMS ETC AT AFS UNDER GE (AF) JORHAT

Amount

M&L for applying one coat of white wash on walls after preperation of old wall surfaces complete all as specified and as directed.

All as per Serial item No. 1 here-in-before but as on ceiling.

M&L for applying one coat of cement based paint after preparation of old surfaces of wall (plastered or unplastered) including washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and as directed.

All as Serial item No. 3 here-in-before but with one coat of distemper with oil emulsion.

M&L for applying one coat of synthetic enamel paint after preparation of old steel surfaces of any descripton complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint after preparation of old wooden surfaces of any description complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over and including one coat of primer and 3mm thick wall care putty after complete removal of existing treatment on walls complete all as specified and as directed.

M&L for writing letters or figures (Block. Roman, Italic or Indian) n. exc. 30cm high complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n. exc. 4 Sqm complete all as specified and as directed.

Taking down shutters of any description exc. 1 Sqm and not exc. 2 Sqm each complete all as specified and as directed.

S&F pressed steel frames 125mm x 60mm, made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc. complete all as specified and as directed.

S&F pressed steel frames 105mm x 60mm, made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc. complete all as specified and as directed.

S&F pressed steel frames 75mm x 50mm, made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc. complete all as specified and as directed.

S&F 2nd class hard wood plain, solid, straight, chowkhat and framed, wrought, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed

S&F for flat iron of size 25x6mm as in hold fast including tarring or coal tar black paint confirming to Fe-410-0 or Fe 310-0 complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in filling of pressed steel chowkhat complete all as specified and as directed

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as required depth of embedded portion of holdfasts exc. half brick and not exc. one brick thick complete all as specified and as directed

S&F 35mm thick factory made 2nd class hard wood, plain, framed, panelled shutter (2 panels) with lock rail and panel of commercial ply or 12mm thick veneered particle board with 9mm BWP commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F 30mm thick factory made flush shutters, solid core construction with block boards core and plywood face panels, commercial type on both sides with application of decorative laminate of approved colour and pattern complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 Sqm complete all as specified and as directed.

Taking down shutters of any description n. exc. 1.0 Sqm complete all as specified and as directed.

M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing shown in SSR Part-II as approved complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown in SSR Part-II complete all as specified and directed.

S&F 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F 30mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted tochowkats complete all as specified and as directed.

S&F steel windows with side hung shutters with box type hinges shutters with steel handle and steel peg stay without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, steel peg stay with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165, complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, etc. complete all as specified and as directed.

Hacking out old broken glass (any thickness, size , qulaity or description) as in metal frame including punching or drilling out old glazing pins/spring clips, complete all as specified and as directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F 4mm thick sheet glass, figured glass, pin headed type, glazing with oil putty in squares n. exc. 0.5 Sqm each pane complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window and door as in new door/window complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over and including one coat of pink primer after preparation of new wooden surfaces over 10cm width or girth complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over and including one coat of red oxide primer after preparation of new steel surfaces over exc. 10cm girth or width complete all as specified and as directed.

S&F as in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window and door as in old door/window complete all as specified and as directed.

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100mm stainless steel butt hinges, medium weight, cold rolled complete all as specified and as directed.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, cast type, anodised including the screws complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S&F for 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n. exc. 200 Cucm each complete all as specified and as directed.

S&F as in repairs door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters 851mm to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F as in repairs floor door stopper of 150mm aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed.

S&F 19mm thick prelaminated particle board, interior grade, prelaminated prelaminated both sides with decorative choice laminations and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F 20mm thick 2nd class hard wood, clean sawn, planed both sides boarding fixed in shelves, partitions and shelves built in of built in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work complete all as specified and as directed.

S&F as in repairs 30mm width continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as per specified and as directed.

S&F vitrified ceramic coloured tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding in layer in cement mortar (1:6) complete all as specified and as directed.

M&L for non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid, over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles as on vertical surfaces of size, 300x200x7mm/450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed bed/bedding in cement mortar (1:4) complete all as specified and as directed.

M&L for 25mm thick plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in bases of floors complete all as specified and as directed.

M&L for 50mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and as directed.

Demolition stone slabs and tiles of any description or thickness in floors, aprons laid and bedded and jointed in cement mortar, etc. complete all as specified and as directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed or bedding layer 15mm thick in cement mortar (1:6) complete all as specified and as directed.

S&F as in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed.

S&F as in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and as directed.

S&F as in repairs kitchen plate rack, made of stainless steel 1mm thick including fixing, overall size 915mmx915mmx255 mm complete all as specified and as directed.

Demolition of reinforced cement concrete for roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone agregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) and making flat rough finished surfaces of concrete complete all as specified and as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Dismantling water tanks of capacity exc. 250 litre and not exc. 500 litre complete all as specified and as directed.

S&F rotational moulded polyethylene (HDPE) water storage tank of 500 litre capacity (cylindrical vertical with closed top), black in colour, three layered construction, hoisted and fixed in position all specified in MES Schedule Part-I complete all as specified and as approved.

Dismantling water tanks of capacity exc. 500 litre and not exc. 1000 litre complete all as specified and as directed.

S&F rotational moulded polyethylene (HDPE) water storage tank 1000 litre capacity (cylindrical vertical with closed top), black in colour, three layered construction, hoisted and fixed in position all specified in MES schedule Part-I complete all as specified and as approved.

Disconnecting existing tanks of (exc. 250 & n. exc. 500 litre capacity), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and as directed.

All as per Serial item No.70 here-in-before but tanks exc. 500 & n. exc. 1000 litre capacity.

Cleaning and removing all scale and dirt, etc, from tanks (exc. 250 & n. exc. 500 litre capacity) and from mouths of circulating pipes, etc. with OHT cover complete all as specified and as directed.

All as per Serial item No.72 here-in-before but tanks exc. 500 & n. exc. 1000 litre capacity.

S&F 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball, screwed for iron pipe (Minimum weight 20 - 210 gms) complete all as specified and as directed.

S&F as in repair 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe (Minimum weight 20 mm - 210 gms) complete all as specified and as directed.

Demolition and breaking up drain pipes of 100mm dia (Salt glazed ware, AC or reinforced concrete), set in cement mortar complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as direcetd.

S&F 110mm bore PVC (SWR) bends, any radius provided with access door complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections complete all as specified and as directed.

S&F 20mm bore GI tubing, "medium grade", with all fitting and fixed complete to walls & ceiling or laid in floors complete all as specified and as directed.

Re-fixing only GI tubing of 20mm bore, any grade, to walls and ceiling or laying in floors complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections complete all as specified and as directed

S&F 15 mm bore GI tubing "medium grade" galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, complete all as specified and as directed.

Re-fixing only GI tubing of 15 mm bore, any grade, to walls and ceiling or laying in floors complete all as specified and as directed.

S&F as in repair for 15mm bib taps, cast copper alloy, fancy type, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F as in repairs for 15mm stop valves, cast copper alloy, fancy type, chromium plated with with long shank and cup (concealed type) for iron pipe of 15mm bore of pipe complete all as specified and as directed.

S&F as in repairs for brass chromium plated shower rose of size 125mm with swivel joint including fixing to 15mm dia steel pipe or union complete all as specified and as directed.

S&F as in repairs PVC valveless syphonic action type flushing cistern, (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32mm bore PVC flush pipe etc. complete all as specified and as directed.

S&F for vitreous china squatting pan, ‘Orissa’ pattern, size 580x440mm white, as approved, with integral foot rests (excluding flushing cistern and flush pipe) including trap set and concrete including connection to trap and to flushing pipe, anti syphonage pipem, etc. complete including making ggod to floors with PCC bedding (1:5:10) type E-2 (using 40mm nominal brick ballast) and connection to trap with cement mortar and making good to floor including demolition of PCC/lime concrete bedding for existing pan complete all as specified and as directed.

S&F as in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and as directed.

S&F as in repairs plastic water closet seat cover (any colour) as approved closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F as in repairs PVC waste outlet pipe, 32/40mm dia for WHB / kitchen sink including waste coupling complete all as specified and as directed.

S&F as in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F as in repairs 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/ 40mm-60 gms) complete all as specified and as directed.

S&F as in repairs 20mm dia tubular towel rail, 'D' type 60cm long between flanges brass chromium plated complete all as specified and as directed.

S&F as in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F as in repairs wash basins, vitreous china (flat back or angle back type) of size 580x450mm, white, including waste coupling fixed with 2 No. cadmium plated rag bolts of 10mm dia complete all as specified and as directed.

S&F 15mm dia pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F as in repairs 15mm dia pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F as in repairs 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

All as per Serial item No. 100 here-in-before but of size 15mm.

S&F as in repairs bathroom cabinet mirror (approved pattern) of size 450mmx350mm, regular size with mirror and PVC shelves complete all as specified and as directed.

S&F as in repairs 50mm dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2, fixed complete to walls, ceilings or in floors, etc. complete all as specified and as directed.

Demolition of brick work, built in cement mortar complete all as specified and as directed.

M&L for brickwork (old size) with sub class ‘B’ bricks, straight or curved on plan, exc. 6m mean radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and as directed.

M&L for brickwork (old size) with sub class ‘B’ bricks, straight or curved on plan, exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Taking down cement or cement lime plaster from brick walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface of wall with cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar (1:3) on fair faces of concrete surfaces of ceiling, finishing even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound (WPC) confirming to IS: 2645-1975 of approved make complete all as specified and as directed.

M&L for applying three coats of white wash on ceiling after preparation of newly plastered surfaces complete all as specified and as directed.

M&L for applying two coats of cement base paint over one coat of alkali resistance primer after preparation of newly plastered surfaces of walls complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over and including one coat of primer after preparation of newly plastered surfaces of walls complete all as specified and as directed.

S&F as in repairs powder coated aluminuium anodised pipe of size 20mm dia as in curtain rod, fixed to brackets complete all as specified and as directed.

S&F as in repairs for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Dismantling timber scantling, 40sq.cm and over in section, in any position, in unframed work complete all as specified and as directed.

M&L for 2nd class hard wood timber scantlings, clean sawn complete all as specified and as directed.

S&F as in repairs 15mm dia, brass CP mixer for mixing hot & cold water, screwed down for iron pipe complete all as specified and as directed.

S&F as in repairs health faucet (ABS body) mild steel, chromium plated suitable for 15mm dia pipe with 1.25m long, flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F as in repairs sheet glass, shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F for grating round 140mm size of PTMT (Minimum weight 50gms) complete all as specified and as directed.

S&F for PVC shelf wall corner size 230mm with all fittings/brackets complete all as specified and as directed.

S&F as in repairs tank cover (lid) for 500 ltrs capacity with locking arrangement complete all as specified and as directed.

S&F as in repairs Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 90gms) complete all as specified and as directed.

S&F as in repairs angle cock/stop valve fancy type 15mm dia, cast copper alloy, chromium plated, high pressure with crutch handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Refixing shutters of any description but exc 1 sqm and not exc. 2sqm each in same opening complete all as specified and as directed.

Refixing shutters of any description but not exc. 1 sqm each in same opening complete all as specified and as directed.

S&F as in repairs fancy CP wall mixer (3 in 1 type) with provision for both overhead shower and hand shower with 115mm long bend pipe and wall flange complete all as specified and as directed.

S&F as in repairs 15mm bib tap standard of PTMT fancy type any colour high pressure screwed for iron pipe (minimum weight 15mm-105gms) complete all as specified and as directed. NOTE : The contract sum shall be derieved by deducting the amount shown in Schedule of Credit attached to this tender from total amount of Schedule 'A'/BOQ.

M/S DHAR AND DHAR (BID ID -3278911)

4S ASSOCIATES (BID ID -3278852)

M/S Deep Construction (BID ID -3278929)

M/S DILIP GOSWAMI (BID ID -3278957)

NIHAR ENTERPRISE (BID ID -3278859)

M/S D J ENTERPRISE (BID ID -3278977)

M/S SANTOSHI TRADERS (BID ID -3278770)

Bidder Name

NIHAR ENTERPRISE

M/S D J ENTERPRISE

M/S Deep Construction

M/S DHAR AND DHAR

M/S PAUL CONSTRUCTION

M/S SANTOSHI TRADERS

M/S DILIP GOSWAMI

4S ASSOCIATES