Repairing of Electrical Infra Work in the rented portation at Main Telephone Exchange Lucknow Road, Hardoi

Dismantling of existing defective Switch fuse units, & metering components including wiring, Aluminium bus bar fixed in existing MV panel and cleaning of entire panel from inside and outside by mean of air blower and removing the stain etc. by applying cleaning agent complete as required, and refixing of bus bar after cleaning,

Testing of existing Electrical wiring of ground & first floor and rectifing the persisting defects of wiring and making good the same as required.

Supplying, fixing testing & commissioning of following items in the existing MV panel i/c making required minor modification in existing bus bar connections , testing etc. complete as required. (M/s LK, Havells, HPL or ss Make). (a) 125 Amp TP&N SDFU with HRC fuse

(b) 63 Amp TP&N SDFU with HRC fuse.

© RYB LED Indicators

(d) Volt Meter 0-500 Volts with VSS

(e)Ampere meter 200 Amp with ASS

(g) Sliding Fuse.

(h) Toggle switch

Supplying & fixing of 100Amp 16 KA Four pole MCCB with spreador set, fixied in sheet steel enclosure including making connections etc. as required.

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. (a) Group C

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (a) Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (a) 3 X 1.5 sq.mm

(b) 3 x 2.5 sq. mm

S/F of following item in exsiting MV panel /MCB DB /Pole Box /free cooling i/c dismentling of faulty unit (if reqd ) i/c ,connections, testing etc comp as reqd. (Make--Legrand or similar superior make). (a) 6-32 A SP MCB 230 V

(b) 100 A 4 Pole Isolator

© 63 Amp SP MCB

(d) MCB Shorting copper Bus bar in existing TPN MCB DBs.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (a) 5/6 amps switch

(b) 3 pin 5/6 amp socket outlet

© 15/16 amp switch

(d) 6 pin 15/16 amp socket outlet

(e) Batten / Angle Holder

(f) Ceiling Rose

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (a) 2 X 6 sq. mm (19mm)

(b) 3½ X 25 sq. mm (28mm)

© 3½ X 50 sq. mm (35mm)

(d) 3½ X 70 sq. mm (38mm)

Supplying & fixning of 3 mm thick phenolic laminated sheet cover on the existing switch board including cutting etc as required.

Dismantelling of existing fan & fittings of old wiring in ground floor, and cleaning of all switch boards of ground first floor with detergent etc as required.