New installation of 1000 mm, 90 kW belt conveyor of length 600 meter at 37EL in RIV seam of Khottadih Colliery.

Amount

New installation of 1000 mm, 90 kW belt conveyor of length 600 meter at 37EL in RIV seam of Khottadih Colliery. (Inclusive of EPF/CMPF)

Complete Installation after Transportation & with Necessary Fabrication of 600 mtrs 1000 mm width, 90Kw Belt Conveyor at 37EL in R-IV Seam which includes 1) Transportation, Carrying from Surface & Fitting of Discharge Head (800 X1400 mm) with Deck Plate, Chute, scrapper and 08 nos of Girders (125 X 250 mm) - 3.0 MT 2) Transportation, Carrying from Surface & Fitting of Drive head with Gear Box & Motor – 7.5 MT 3) Transportation, Carrying from Surface & Fitting 2 nos. of load table one for Discharge & 2nd for Tail End& decking plate – 3 MT. 4) Transportation & Fitting including grouting of Tail end Assembly with V-Scraper & Decking fabrication & Fitting - 1 MT 5) Transportation, Carrying from Surface & Fitting Loop take up assembly with Winch. & Bend Pulley frame - 3.0 MT, 6) Fitting Complete 250 mtr Structure with Top & Bottom Rollers after transported from surface to work site laying ,and, fitting @ -68Kg-per-mtr, - 40.8 MT

Fabrication of two no of hopper 04 mtrs long which including labour cost, oxygen, DA and welding

Fabrication of one no. of tail-end assembly which including labour cost, oxygen, DA and welding

Fabrication of loop take up assembly with trolley which including labour cost, oxygen, DA and welding and making 4 nos. of pullies

1000 mm PVC Belting transportation from surface, laying, jointing tensioning trail run etc.

1)Holding down bolts of Drive Hd & Stucture , Loop Take Up triangular Frame and Tail End. – 40 Nos 2) 15 Times Belt extension(09 Nos each time) -135 nos

Transportation of ACB, starter & PVC cable, Pull Cord, Signaling System etc surface to site.

15 times belt extension including Tail End Assembly and hopper Shifting - 14 hds. x 1.5 shifts = 21 hds. for one extension, semi Skilled – 6 hds. @Rs.1351.56/- + un skilled 15 hds. @Rs.1280.95/-

Fencing of Drive Head, Loop Take Up and Tail End ( Tail End fencing 16 times)

Consumable Nut & Bolt 1/2” X 11/2” – 255Kg, 5/8 “X 2“ -50 Kg, 5/8 “X 21/2“ -10 Kg, Plain washer- 25Kg

Dismentling of 90 KW drive head, discharge head, loop take up & bend pulley from 31L belt 7.5 + 3.0 + 3.0 = 13.5 MT

Hanging by vartical support 40 mtr. length conveyor structure providing M.S. channel

Total impact of GST for the purpose of CTC

SABIR CONSTRUCTION

BABLU SINHA