Loading
Loading…
Loading…
Tender Value
₹1.1 L
EMD Value
₹2,800
Closing Date
15 May 2026, 8:00 pmClosed
Directorate of Municipal Administration
Junior Engineer
Supplying of 3 inch 4 inch 6 inch ,bend, relay kit ,auto strater, and other materials to TP Kudathini
DMA/2026-27/IND6252
DMA/2026-27/IND6252
Open
Two Tender Document System(Two Cover)
DMA Town Panchayat Kudthini
4 documents required · 4 mandatory
Other than MSEs - Previous work orders and experience certificate should be uploaded for the similar supply like Screening machine to the Government Departments for an amount of 0.895 Lakhs 80 Perecent of the requirement of the quantity required in any ONE of the last 3 years as per Section-XII. (Or) MSEs - Previous work orders and experience certificate should be uploaded for the similar supply to the Government Departments for an amount of 0.45 Lakhs 40 Perecent of the requirement of the quantity required in any ONE of the last 3 years as per Section-XII. MSEs registration certificate should be uploaded and Relevant documents should be uploaded. (Or) For Authorised Suppliers: Tenders of Tenderers quoting as authorized representative of a manufacturer, meeting with the above requirement in full, can also be considered provided 1) The manufacturer furnishes authorization in the prescribed format assuring full guarantee and warranty obligations as per GCC and SCC and 2) The tenderer, as authorized representative, has supplied, installed and commissioned satisfactorily Previous work orders and experience certificate should be uploaded for the similar supply like to the Government Departments 30% of the requirement for an amount of 0.34 LAKHS
Firm Registration Certificate
GST Certificate
Liquid assets and /or availability of credit facilities of not less than amount Rs 0.35 lakhs (Unconditional Letter of credit from scheduled banks for meeting the fund requirement etc. Credit lines/ letter of credit/ Banker certificates issued by Nationalized banks.
Other than MSEs The Average Annual financial turnover of the tenderer should be not less than 1.32 Lakhs during the last 3 precedings financial years. The CA certified turnover certificate with UDIN should be uploaded. MSEs The Average Annual financial turnover of the tenderer should be not less than 0.66Lakhs during the last 3 precedings financial years. MSEs registration certificate should be uploaded
₹500
₹2,800
6 May 2026
6 May 2026
16 May 2026
8 May 2026
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING1 No set of Phase indicating lamps with SFU of suitable rating 1 N Analog Ammeter 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump 1 No.MCB 1 No DOL of D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor under voltage over Volage, under current over current dry run protection suitable for
Supply and delivery at site special moulded variety PVC BEND as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments110 mm dia PVC BEND (As per PWD SR2023-24 Volume-V, Page No.118, I.No.10.10.8)
Supply and delivery at site special moulded variety PVC BEND as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with i90 mm dia PVC BEND (As per PWD SR 2023-24 Volume-V, Page No.118, I.No.10.10.7)ts latest amendments
Supply and delivery at site special moulded variety PVC BEND as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments75 mm dia PVC BEND (As per PWD SR 2023-24 Volume-V, Page No.118, I.No.10.10.5)
Supply and delivery at site special moulded variety PVC BEND as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 63 mm dia PVC BEND (As per PWD SR 2023-24 Volume-V, Page No.118, I.No.10.10.4)
Supply and delivery at site special moulded variety PVC BEND as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments50 mm dia PVC BEND (As per PWD SR 2023-24 Volume-V, Page No.118, I.No.10.10.3)
PVC BEND 32 mm dia(As per PWD SR 2023-24 Volume-V, Page No.118, I.No.10.10.2)
Supply and delivery at site special moulded variety PVC BEND as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments(As per PWD SR 2023-24 Volume-V, Page No.118 I.No.10.11.1)25 mm dia PVC BEND
PVC pipes of 6 Kg/cm2 for 160mm(3.923) (As per PWD SR 2023-24 Volume-V, Page No.A-45, I.No.678)
PVC pipes of 6 Kg/cm2 for 110mm(1.894) (As per PWD SR 2023-24 Volume-V, Page No.A-45, I.No.677)
PVC pipes of 6 Kg/cm2 for 90mm(1.313)(As per PWD SR 2023-24 Volume-V, Page No.A-45, I.No.676)
PVC pipes of 6 Kg/cm2 for 63mm(0.662) (As per PWD SR 2023-24 Volume-V, Page No.A-45, I.No.675)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KG1 Bid document 6252.doc
Tender Document • 0.59 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .