SPECIAL REPAIRS TO BUILDING NO. ET-04, ET-08 AND ET-18 AT TAMULPUR MILITARY STATION UNDER GE RANGIA

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and as directed by Engineer-in-charge.

M&L for Brickwork with subclass B brick,straight or curved on plan exc 6 m mean radius built in 1:6 cement mortar complete all as specified and as directed by Engineer-in-charge.

M&L for brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.

Dismantling unframed timber scantlings 40 Sq cm and over in section and in any position complete all as specified and as directed by Engineer-in-charge..

M&L 2nd class hard wood in scantling wrought timber unframed and fixed complete all as specified and as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-charge.

M&L chequered cement concrete tiles 300x300x25 mm thick, with grey cement and pigments ,set ,jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layer cement mortar 1:6 for laying floor finishes complete all as specified and as directed by Engineer-in-charge.

M&L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as specified and as directed by Engineer-in-charge.

S&F Coloured Glazed ceramic tiles 350 x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 10 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and as directed by Engineer-in-charge.

M&L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as specified and as directed by Engineer-in-charge.

M&L machine cut kota stone slab flooring with 20-25mm thick over 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-charge.

Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings complete all as specified and as directed by Engineer-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semi-corrugated (Trapezoidal) steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws along washers etc complete all as specified and as directed by Engineer-in-charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks etc complete all as specified and as directed by Engineer-in-charge.

Demolition of reed lathing single or double including battens and plaster or chicken wire lathing complete all as specified and as directed by Engineer-in-charge.

S&F wire netting of galvanised steel Wire netting 0.90 mm dia fixed with tinned tacs of wire staples, size of mesh 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste complete all as specified and as directed by the Engg-in-charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed by Engineer-in-charge.

S&F exposed GI Powder coated snap grid frame work for false ceiling of grid size 600x600 mm comprising of 4 mm thick non Asbestos Cement fibre board of size (595x595)mm in a grid of GI system duly suspended with 2 mm dia GI wire fixed with steel dash fasteners or iron purlins from the roof etc complete all as specified and as directed by Engineer-in-charge.

Dismantling of unframed fillets, rails, posts, rafters, purlins etc., under 40 Sq. Cm in section complete all as specified and as directed by Engineer-in-charge.

M&L Second class hard wood plain fillets square, rectangular or triangular in section ,clean sawn , secured with nails or brads face sectional area Exc 3 and not exceeding 6 Sqcm complete all as specified and as directed by Engineer-in-charge.

M&L Second class hard wood plain fillets square, rectangular or triangular in section ,clean sawn , secured with nails or brads face sectional area Exc 6 and not exceeding 13 Sqcm complete all as specified and as directed by Engineer-in-charge.

M&L Second class hard wood plain fillets square, rectangular or triangular in section ,clean sawn , secured with nails or brads face sectional area Exc 13 and not exceeding 25 Sqcm complete all as specified and as directed by Engineer-in-charge.

Dismantling mild steel framed/unframed work of any description not other wise provided complete all as specified and as directed by Engineer-in-charge.

S & F Rolled Mild steel work in Roof trusses (Framed), trussed, purlins, crane gantries,rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections) including distance pieces,cleats etc complete all as specified and as directed by Engineer-in-charge.

S&F Mild steel work in hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 410 - O or Fe 310 - O complete all as specified and as directed by Engineer-in-charge.

M&L mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed by Engineer-in-charge.

M&L mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O complete all as specified and as directed by Engineer-in-charge.

Taking down chowkhats or frames n.exc 1.50 sqm but with shutters(without taking off shutters from the frames) complete all as specified and as directed by the Engg-in-charge.

Taking down chowkhats or frames exc 1.50 sqm but n.exc 4 sqm but with shutters(without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-charge..

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and as directed by Engineer-in-charge.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed by Engineer-in-charge.

S&F PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-charge.

S&F Solid PVC Double door frame of size 50 mm x 95 mm made out of 5 mm Prelam PVC Sheet reinforced with M.S.tube , supplying & fixing in opening as per specification and drawing complete all as specified and as directed by Engineer-in-charge.

S&F factory made soild panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togehter with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed by Engineer-in-charge.

S&F Factory made Solid PVC Moulded Door Shutter 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2 mm thick Moulded prelam PVC sheet on the front face & 2 mm prelam PVC Sheet on back face with particle board core , supplying and fixing in frame at site complete as per specification and drawing complete all as specified and as directed by Engineer-in-charge.

All as per serial item no. 35 above but wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC Sheet panel. The wire gauge shall be wrapped on an additional square 8 mm M.S.Solid tube and this tube shall be welded to M.S.Tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and as directed by Engineer-in-charge.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed by Engineer-in-charge.

S&F steel ventilators with top hung shutter including hinges,steel peg stay, complete all as specified and as directed by Engineer-in-charge.

S&F 35 mm thick second class hardwood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered or rounded fitted with cut and mitred beads and rebated sash bars any numbers for securing glass etc sizes of member as specified in SSR part I section & clause 8.24 (a) complete all as specified and as directed by Engineer-in-charge.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, and also one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed by Engineer-in-charge.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-charge.

S&F pressed steel double door frame of size 60 mm x 165 mm for doors with one or more rebates including necessary fixing lugs ,hinges, lock strike plate etc,as specified,supplied & fixing in opening as per specification and drawing including filling of PCC (1:3:6) in 20 mm aggregates complete all as specified and as directed by Engineer-in-charge.

S&F 100 mm long Heavy weight, cold rolled mild stainless steel Butt hinges complete all as specified and as directed by Engineer-in-charge.

S&F 150 mm Aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed by Engineer-in-charge.

S&F 150mm anodised aluminium handles fabricated type complete all as specified and as directed by Engineer-in-charge.

S&F 300 mm long mild steel Helical door Spring of approved quality complete all as specified and as directed by Engineer-in-charge.

S&F 300mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed by Engineer-in-charge.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness complete all as specified and as directed by Engineer-in-charge.

All as per serial item no. 48 above but for reinforced cement concrete complete all as specified and as directed by Engineer-in-charge.

M&L 50 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in flooring ,plinth protections etc, finished even and smooth with using extra complete all as specified and as directed by Engineer-in-charge.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in flooring , hard standing & pavings etc, finished even and smooth with using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L Providing precast cement concrete 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4 complete all as directed by Engineer in Charge complete all as specified and as directed by Engineer-in-charge.

M&L for RCC (Nominal mix) (1:2:4) type B1 (using 20mm graded stone aggregate) in beams , lintels etc complete all as specified and as directed by Engineer-in-charge.

M&L for RCC (Nominal mix) (1:2:4) type B1 (using 20mm graded stone aggregate) in columns, pillars,piers,posts and sruts etc complete all as specified and as directed by the Engg-in-charge.

Use and waste of form work to sides and soffits of floor and roof beams ,lintels ,shelves etc and similar work for rough finished surfaces complete all as specified and as directed by Engineer-in-charge.

Use and waste of form work to sides of pillars,posts,struts,piers,columns etc and similar work for rough finished surfaces complete all as specified and as directed by Engineer-in-charge.

Glass dividing strips, 38 x 3 mm thick and inserted in position to confirm the design complete all as specified and as directed by Engineer-in-charge.

S&F of 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pans complete all as specified and as directed by Engineer-in-charge.

S & F in repairs 15 mm bore chromium plated bib tap fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.

S&F in repairs grating round 100 mm size of PTMT (min weight 25 grms) complete all as specified and as directed by Engineer-in-charge.

S&F in repairs Vitreous China wash down water closet (EWC)pan 580 x 440 mm (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete all as specified and as directed by Engineer-in-charge.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand(Pedestal pattern) complete all as specified and as directed by Engineer-in-charge.

S&F in repairs PVC 10 ltr capacity low level flushing cistern white with inlet ball valve float and braket and 32 mm bore PVC flush pipe complete all as specified and as directed by Engineer-in-charge.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge.

S & F in repair 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by Engineer-in-charge.

S & F in repair angle valve as 15mm bore C/P type fixed to iron pipe etc complete all as specified and as directed by Engineer-in-charge.

S & F in repairs 15 mm bore Stop valves, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-charge.

S&F in repair 15mm dia PVC connection pipe with PTMT nuts of length 600 mm all as directed complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed by Engineer-in-charge.

S&F for PVC (SWR) 110mm Junction (single T) equal or un equal provided with access door complete all as specified and as directed by Engineer-in-charge..

S&F PVC (SWR) 110 mm bore bends complete all as specified and as directed by Engineer-in-charge.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned stacks, or galvanized wire staples fixed with wooden beads and screws complete all as specified and as directed by Engineer-in-charge.

S&F in repairs cromimum plated helth faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long Easy Flex tube in chrome finish complete all as directed . Make- Marc ,Crea or equivalent complete all as specified and as directed by Engineer-in-charge.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed by Engineer-in-charge.

M&L for rendering 15 mm thick on fair faces of brick work or one side of lathing in cement mortar 1:4, surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for rendering 10 mm thick on other than fair faces of brick work or other side of lathing in cement mortar 1:6 , surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat alkali resistant priming paint applied over 2 mm thick wall care putty finished and smooth on wall complete all as specified and as directed by Engineer-in-charge..

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of newly untreated wood or wood base surfaces of any description, not exceeding 10 cm width or girth, not otherwise described and applying two coat of Synthetic Enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-charge.

M&L preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-charge.

S&F steel water tubing medium grade galvanised,with all fitting; fixed to walls of 15 mm bore of tube in short lengths complete all as specified and as directed by Engineer-in-charge.

S&F steel water tubing medium grade galvanised,with all fitting; fixed to walls of 20 mm bore of tube complete all as specified and as directed by Engineer-in-charge.

Taking down carefully aluminum/copper point wiring (light fan, socket or power) complete incl fittings and fixtures such as switches, sockets, light fittings, ceiling rose, pendants, lamp holders, shade conical, regulators etc and separating serviceable fittings for reuse in the same work and removing unserviceable fittings and fixtures with wiring cable, battens, wooden boards etc from site and making good disturbed surfaces of walls, floors, ceiling etc complete all as specified and as directed by Engineer-in-charge.

M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated unsheathed single core multi stranded FRLSH copper conductor cable drawn into and incl PVC casing capping sleeves and caps of adequate width and length with all accessories and fittings like bends . elbow crosses etc with PVC round block and PVC terminal boxes with 3.00mm thick laminated sheet cover for mounting fittings etc like switches sockets and fan regulator incl 1.5 sqmm size PVC insulated multistranded FRLSH copper conductor cable as earth continuity conductor and connected to earth dolly complete all as specified and as directed for one light point controlled by one switch, complete all as per specified and as directed by Engineer-in-Charge.

All as per serial item no.87 above but for One fan point controlled by one switch complete all as specified and as directed by Engineer-in-charge.

All as per serial item no.87 above but for One 3 pin socket out let 5 Amps on independent board complete all as specified and as directed by the Engg-in-charge.

All as per serial item no.87 above but for One 3 pin socket out let 5 Amps on same board complete all as specified and as directed by the Engg-in-charge.

All as per item No. 87 above but with 4 sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15 A socket outlet on independent board complete all as specified and as directed by the Engg-in-charge.

S&F switch piano flush button single pole 5Amps 230 volt one way complete all as specified and as directed by the Engg-in-charge.

S&F ceiling Rose, surface bakelite, three terminals complete all as specified and as directed by the Engg-in-charge.

S&F Socket outlet 2 in 1, 3 pin, 5A, flush type piono Universal type,controlled by One Switch, conforming to IS complete all as specified and as directed by the Engg-in-charge.

S&F Switch Socket Combination 3 Pin 5/6 Amp, Flush Piano Universal Type, controlled by One Switch, conforming to IS complete all as specified and as directed by the Engg-in-charge.

Supply and fix switch socket combination 05/16 Amp 6 pin flush type, complete all as specified and as directed by Engineer-in-charge.

Supply and fix fan regulator electronic type, rotary step, Socket type 240 Volt, complete all as specified and as directed by Engineer-in-charge.

Supply and fix LED light fitting single tube 1 X 22 Watts, 240 V surface and wall mounted led batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with all accessories internally pre-wired and including connecting up with twine core twisted flexible copper contactor cable with 1.5M long suitable size, complete all as specified and as directed by Engineer-in-charge.

S&F Security light fittings 1x 15 Watt LED New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP openning seperate driver compartment with IP65 protection and impact resistance of IK07 and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size, complete all as specified and as directed by Engineer-in-charge.

S&F steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one complete all as specified and as directed by Engineer-in-charge.

S&F in repair sheet metal enclosure for double door SPN 12 Ways DB'S when MCBs to be used single pole neutral 240 Volts with 200 A Bus Bar complete all as specified and as directed by Engineer-in-charge.

S&F MCB Single pole and neutral 240 Volt 40 Amp capacity complete all as specified and as directed by Engineer-in-charge.

S&F MCB Single pole 240 Volt 6 to 32 Amp capacity complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft/loose soil, complete all as specified and as directed by Engineer-in-charge.

Removing excvated materials (soils) not exc. 50.00 M and deposited where directed at a level not exc. 1.50 M above the starting point in soil complete all as specified and as directed by Engineer-in-charge.

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated ( punned) upto 180mm thickness complete all as specified and as directed by Engineer-in-charge.

Supply & Laying Sub-Class B Bricks, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion laid for UG cable protection complete all as specified and as directed by Engineer-in-charge.

Taking down/up XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade of size 16 sqmm 2 core including taking out unserviceable GI pipe and bricks used for cable protection complete all as specified and as directed by Engineer-in-charge.

Supply, fixing, testing and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade on walls with fixing acessories of 16 Sqmm, 2 Core complete all as specified and as directed by Engineer-in-charge.

Supply laying GI pipe 25 mm bore light grade for protection of UG cable complete all as specified and as directed by Engineer-in-charge.

S&F in repair ceiling fan hook made out of MS flat 50 X 6 mm thick suitable for hanging of ceiling fan including nuts, bolts and washer with 12 mm dia round bar hook complete all as specified and directed complete all as specified and as directed by Engineer-in-charge.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) including taking down old unserviceable one, complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate complete all as specified and as directed by Engineer-in-charge.

Supply and fix 34 watt LED Light aesthetically designed 2x2 led flat panel for surface mounting which provides soft-light and glare free symmetrical illumination complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-charge.

Supply and fix 10 watt LED Light energy saving new generation 10W LED IP65 bulkhead luminaire with opal diffuse complete all as specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

M/s SHARMA BUILDERS & ENGINEERS

M/S S.S. Construction

OM CONSTRUCTIONS

RAJKAMAL ENTERPRISE

M/s DEBOJIT ROY