Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.8 LAccepted-AOC BUILDING NO FLAT NO 19 6TH CROSS ROAD SANJEEVINI NAGAR MUDALAPALYA BANGALORE 560072 | BANGALORE | BANGALORE | KARNATAKA | 560072 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹47.3 L+₹14.4 L (43.6%)Rejected-AOC | L2 | Rejected-AOC Not L1 Bidder | |
| 3 | Rejected-Technical | - | Rejected-Technical Not found in order |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
17 Oct 2020, 6:00 pmClosed
GE U WATER SUPPLY DELHI CANTT10
GE U WATER SUPPLY DELHI CANTT10
CERTAIN REPAIR REPLACEMENT OF WATER SUPPLY PIPE LINE IN SUMRAN LINE KARAM VIHAR MORE LINE KABUL LINE AREA AND ALLIED WORKS OF AGE U WATER SUPPLY NO II UNDER GE U WATER SUPPLY DELHI CANTT10
2020_MES_378852_1
GE/WS/D-101 OF 2020-21
Open Tender
Civil Works
Item Rate
180 days
GE U WATER SUPPLY DELHI CANTT10
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
GE U WATER SUPPLY DELHI CANTT10
₹60,000
Yes
16 Dec 2020
18 Sept 2020
19 Oct 2020
18 Sept 2020
17 Oct 2020
3 Oct 2020
Amount
Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level complete all as specified and as directed.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 Cm thick soft / loose soil complete all as specified and as directed.
Removing excavated material (Soils) from site to a distance not exc 50 M away and depositing where directed at a level not exc 1.5mtr above the starting point complete all as specified and as directed.
Boring holes under road pavement by bocky manually/mechanically in any type of soil upto 200 mm bore. complete all as specified and as directed.
Taking up Cast Iron/Ductile Iron water mains (including all fittings) with spigot & socket ends and lead/tyton joints including burning out lead joints and recovering lead complete all as specified and as directed.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Refixing/relaying only in trenches CI/DI pipes with socket and spigot ends, cleaning thoroughly and removal of all blockages if any complete all as specified and as directed for the following size/bore of pipes. Note : Joints and CI/DI fittings shall be measured and paid seperately
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Taking down old unsv DI pipe, joints, bends, elbow, tees, rubber joints upto 100 mm dia complete all as specified and as directed.
Taking down old unsv DI pipe, joints, bends, elbow, tees, rubber joints upto 100 to 200 mm dia complete all as specified and as directed.
Supplying, laying, jointing, testing and commmisioning of DI Pipe as per IS 8329, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches including rubber gasket joint (tyton joints) complete all as specified and as directed at site for the following sizes :- Note : - Joints shall be measured and paid separetely
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Material and Labour in replacement CI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of the following sizes confirming to IS: 1538-1993 complete all as specified and as directed.
Upto 150 mm bore
200 to 250 mm bore
Material and Labour in replacement DI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of the following sizes confirming to IS: 9523 complete all as specified and as directed.
Upto 150 mm bore
200 to 250 mm bore
Material and labour for Run lead joint including jointing material for CI/DI pipe of following size/bore :-
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Material and labour for Rubber Gasket Joint (Tyton Joint) including jointing material for DI/CI pipe of following size/bore :-
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Taking down old unsv MS pipe, joints, bends, elbow, tees upto 250 mm dia complete all as specified and as directed.
Supplying, laying, jointing, welding & testing MS Pipe in replacement (Heavy duty class 'C') laid in trenches or on floors for connections to centrifugal pump sets for suction, pump to header and to connect out going water main CI/DI pipe line complete all as specified and as directed. Note:- MS Flanges and Flange joints complete with jointing materials shall be measured and paid separately.
100 mm bore
150 mm bore
200 mm bore
250 mm bore
Supplying and fixing, MS flanges of 100 mm bore not less than 16 mm thick duly welded on ends of MS pipe complete all as specified and as directed.
Supplying and fixing MS flanges of 150 mm bore not less than 16 mm thick duly welded on ends of MS pipe complete all as specified and as directed.
Supplying and fixing MS flanges of 200 mm bore not less than 16 mm thick duly welded on ends of MS pipe complete all as specified and as directed.
Supplying and fixing MS flanges of 250 mm bore not less than 16 mm thick duly welded on ends of MS pipe complete all as specified and as directed.
M&L for Flanged Joints with rubber or fibre board gasket including nuts, bolts and double washers of following sizes complete all as specified and as directed.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
Supply, fixing, jointing & testing Cast Iron Sluice Valve of sizes as under, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body, confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unsv sluice valve complete all as specified and as directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
50 mm bore
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Supply, fixing, jointing and testing of Cast iron Non Return valve without by pass arrangement, swing type, confirming to IS 5312, flanged ends pressure rating PN 1.0 complete including taking out unsv NRV complete all as specified and as directed.. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
50 mm bore
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Supply and fixing CI foot valve rating PN 0.2 flanged ends, swing type opration with rubber sheet, as per IS:4038 including taking out unsv foot valve complete all as specified and as directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
100 mm bore
150 mm bore
Supply, installation and testing of flanged ends water meter ISI marked woltman type, Class 'B' of following sizes and making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/inclind/vertical position, including taking out unsv water meter complete all as specified and as directed. Note :- Flange joints including jointing materials shall deemed to be included in the unit rate of this item.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Taking up or down GI tubing and connections of the following sizes from trenches / wall / floor including cleaning for refixing or removal complete all as specified and as directed. :-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Refixing/relaying only GI pipe medium grade with all fittings fixed complete to walls and ceiling or in floors on old/new position as directed of following sizes :-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Supplying & fixing gun metal gate valves with iron wheel head, screwed both ends for iron pipe, ISI Marked, as per IS: 778 of following sizes including taking out unsv gate valves complete all as specified and as directed.
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Labour for cutting of CI /DI/GI pipe in position for reducing to required length for insertion of new tees, branches etc of 100 to 150 mm bore complete all as specified and as directed.
Material and labour for fixing of water pressure gauge (0-5 Kg/cm square) 100mm dial size including boring, threading, welding in CI/DI/GI of any sizes and connected with suitable size of U type MS/CP pipe with ON OFF cock complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation of brick pillar to support the pipe line including demolition of old PCC and removing the debris from site complete all as specified and as directed.
Material and labour for Brick work with sub class 'B' bricks straight or curved on plan exc. 6M mean radius built in CM (1:4) as in brick pillar of required size and shape to support the pipe line including demolition of old brickwork & removing from site complete all as specified and as directed.
Material and labour for rendering 10 mm thick with cement mortar (1:6) on fair faces of brick work / concrete surfaces, finished the surface even and fair complete all as specified and as directed.
Taking out sluice valve, foot valve, refacing, regrinding, rubber gasket changes, stem nut & bolts and refixing the same serviceable condition with flange joints including nuts, bolts and double washers, painting of following sizes complete all as specified and as directed.
50 mm bore
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Material and labour for GI tubing 'medium grade' with all accessories including bends, elbow, socket, union, nipple etc including taking up or down old unserviceable GI tubing complete all as specified and as directed.
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
Supply, installation and testing flanged ends strainer/dirt box of following sizes with stainless steel mesh suitable for cold water meter to avoid foreign material entering into meter and making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/inclind/vertical position, including taking out old unsv strainer/ dirt box complete all as specified and as directed.. Note :- Flange joints including jointing materials shall deemed to be included in the unit rate of this item.
80 mm bore
100 mm bore
150 mm bore
Supply, fixing, jointing & testing butterfly valve (wafer type) of sizes as under, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body, including taking out unsv butterfly valve complete all as specified and as directed. Note:- Jointing material shall deemed to be included in the unit rate of this item.
50 mm bore
80 mm Bore
100 mm bore
150 mm Bore
200 mm Bore
An amount of Rs 416410.00 shall be deducted from BOQ on account of schedule of credit
somyaenterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .