REPAIR REPLACEMENT TO FALSE CEILING WALL PANELING AND WOODEN HOINERY OF VARIOUS BLDGS IN SECTOR C UNDER AGE BR I OF GE 865 EWS

Amount

M&L for Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed by Engr-in-Charge.

M&L for Dismantlng wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton.(Framed work) complete all as specified and as directed by Engr-in-Charge.

S&F anodised aluminium snap grid of size 605 x 605mm , frame work of false ceiling including hangers 6mm dia G.I (up to 1200mm length ) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed by Engr -in-charge

M&L providing and fixing Gypsum board 12mm thick and 600x600mm in size in ceiling fixed with screw or with staples on snap grid as per manufactures instructions, complete all as specified and directed by Engr-in-charge

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed by Engr-in-Charge.

M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section complete all as specified and as directed by Engr-in-Charge.

M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed by Engr-in-Charge.

M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work complete all as specified and as directed by Engr-in-Charge.

Ditto as above ser No 8.00 but on ceiling complete all as specified and as directed by Engr-in-Charge.

M&L French polishing on wood or wood based surface of any width or girth or any description,including cleaning and preparing the surface including a coat of wood filler o new surface with two or more coats complete all as specified and as directed by Engr-in-Charge.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed by Engr-in-Charge.

Ditto as above but on ceiling complete all as specified and as directed by Engr-in-Charge.

M&L 5mm thick printed PVC sheet in strips & channel feathered at edges for fixing on solid PVC wall lining, insulated PVC wall lining and solid PVC partition inclusive of solvent cement and fixing at site as per specifications and as directed by Engr-In-Charge

S&F 5mm thik PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame as per specification and drawing complete all as specified and as directed by Engr-in-Charge.

M&L for not less than 15mm thick wooden battens of 100mm wide fixed each other with male and female grooves fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed by Engr-in-Charge.

Ditto as above but on ceiling complete all as specified and as directed by Engr-in-Charge.

S&F in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs all as specified and as directed by Engr-in-charge.

M&L for Dismantling boarding / wooden flooring of any description ,fixed in any positon complete all as specified and as directed by Engr-in-Charge.

M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets or as specified by manufacture complete all as specified and as directed by Engr-in-Charge.

M&L for Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge.

M&L for Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed by Engr-in-charge.

M&L for Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as directed by Engr-in-charge.

Ditto but n'exc 1.0 sqm complete all as directed by Engr-in-charge

M&L for Hacking old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed by Engr-in-Charge.

M&L Taking down shutters of any description area not exceeding 1 Sqm each, resecuring or easing & adjusting and refixing in the same opening complete all as directed by Engr-in-charge.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each,resecuring or easing & adjusting and refixing in the same opening complete all as directed by Engr-in-charge.

M&L sheet glass 4.8mm thick ordinalry quality and glazing with aluminium beeds in square not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-Charge.

M&L 12mm thick toughned glass as in hinged doors, partitions autimtic doors and similar work including cutting to shape , drilling holes required. Complete all as specified and as directed by the Engineer-in-Charge Note- all connected items will be measured and paid seperately

M&L in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheetfoundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engr-in-Charge.

S & F in repairs stainless steel floor hinges for toughened glass door complete all as specified and as directed by Engr-in-Charge.

S & F stainless steel handle 25mm dia and 450mm long for toughened glass door complete all as specified and as directed by Engr-in-Charge.

S & F in repairs stainless steel pivot for toughened glass door complete all as specified and as directed by Engr-in-Charge.

S & F in repairs stainless steel bottom/floor lock for toughened glass door complete all as specified and as directed by Engr-in-Charge.

S&F for factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.

S&F for aluminium sliding windows with 50 micron powder coating, three track sliding windows with two glazed shutters, 5mm th tinted glass ordinary quality and one shutter of stainless steel wire mesh 0.36mm dia wire and 1.40mm aperature including good quality of bearing handle, locks, including EPDM gasket to render the glazing, air and water tight etc complete all as specified and as directed. catalouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom - 20957, Three track top/vertical-20958, handle-20606, Interlocking-20605, Top and Bottom - 20604.

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified

S&F in repair aluminium (Die cast) body door closer hydraulically dessignation No 3 universal type suitable for door shutter of 851 to1000mm in width and weight 61 to 80 kg complete all as specified and as directed by Engr-in-Charge

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge

S&F 2nd class soft wood plain, solid, straight chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete(Glass shall be measured Seperately) all as directed by Engr-in-Charge.

S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete.all as specified and as directed by the Engr-in-Chage

Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed by the Engr-in-Charge.

S&F for 35mm thick 2nd class soft wood plain framed paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats , complete all as directed by Engr-in-charge.

S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats , complete all as directed by Engr-in-charge.

S&F 2nd class soft wood 35 mm thick Glazed and skelton shutter, open and prapared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately) complete all as specified and as directed by the Engr-in-Charge..

S&F MS framedwork such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

S&F Steel windows (frame with shutter) with side hung shutters including projecting type hinges with steel handle ,and steel peg stay,complete with glazing bars,dovatiled or welded (Glass shall be measured Seperately)complete all as specified and directed by Engineer-in-Charge.

M&L sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by Engr-in-Charge

S&F in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by Engr-in-Charge

S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed by Engr-in-Charge

S&F stainless steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed by Engr-in-Charge

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed by Engr-in-Charge

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed by Engr-in-Charge

S&F mild steel butt hinges, medium weight cold rolled 75mm size complete all as specified and as directed by Engr-in-Charge

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed by Engr-in-Charge

S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed by Engr-in-Charge

S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-Charge

S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed by Engr-in-Charge

S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed by Engr-in-Charge

M&L for Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed by Engr-in-Charge

M&L for 15mm thick rendering on other than fair faces of brick works in two layers 10 mm & 5 mm thick using water proofing compound for outer layer of 5mm thick finished even and fair without using extra cement in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge

M&L for 10mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 6 complete all as specified and as directed by Engr-in-Charge

M&L for preperation of new plastered wall surface of any description and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge

M&L for preperation of new plastered wall surface of any description and applying two coats of cement based paint complete all as specified and as directed by Engr-in-Charge

M&L for preperation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge

M&L for preparation new steel surfaces of any description, not otherwise described, over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge

M&L for preperation of old wooden wall & ceiling surface surface any description over 10cm in width or girth and applaying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge

Rampal Singh Contractor

Horizon Construction Company

PARIDHI CONSTRUCTION

SHARMA AND SONS CONSTRUCTION CO

M.S Sharma Enterprises

Mehar Enterprises