Conversion of conference room into rooms in Munitions House, New Delhi.

Amount

Item Description

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Brickwork with subclass B bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4

M&L for RCC Type B0 1:2:4 (12.5mm graded aggregate) in Beams, cantilevers, bressumm ers, lintels over 1.5m span

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for Rendering 12mm thick on fair faces of brick work or concrete sur faces built in cement plaster 1:4

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for 20 mm thick screed bed with 1:4 cement mortar on floor.

M&L for Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement/Epoxy grout to match as directed by EIC. Make - Kajaria, Somany, Johnson

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement/epoxy grout to match as directed by EIC. Make Kajaria, Somany, Johnson

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement/Epoxy grout to match as direct by EIC. Make - Kajaria, Somany, Johnson

M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing and directed by EIC.

Dismantling boarding, in false ceiling with frame any description, fixed in any position with nails

M&L for 3mm thick wall care putty on wall

M&L for Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade two coats in walls/ceiling . Make- Asian, berger, Nerolac

Providing and fixing factory made uPVC white colour Sliding window/Ventilator Three track (including frame) made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Area of window not exc 2.00 sqm each (Note: The Unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. )

M&L for Sheet glass,4.8mm thick ordinary quality and glazing with oil putty/rubber beading in square n exc 0.5 sq. m in each pane in upv windows/Ventilators.

Providing and fixing second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed, including gloss finishing with PU Wood polish and fixed in position with hold fast lugs or with ash fasteners of required dia & length or as directed by EIC.

Providing and fixing second class teak wood 30mm thick shutter panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, including gloss finishing in all respect with PU wood Polish all complete as directed by Engineer-in-charge.

S&F 125mm size Butt hinges, heavy weight, cold rolled mild steel, and fixed

S&F 300 mm length Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed

S&F 300mm lenth Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F Mild steel pressed handles, oval type, stove enamelled black of size 150mm.

Providing and fixing plaster of Paris false ceiling up to a height of 5 m above floor level, over ceiling angle, GI ceiling section and intermediate section (All kind of sections/Channels as approved by EIC) and reinforced with stainless steel wire mesh fixed to GI Channel frame etc. complete in all respect and finsih/design/pattern as decided by EIC. Make - Gyproc, Armstrong, Shera

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard/Dense soil.

M&L for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

M&L for 100mm bore PVC (SWR) bends any radius

S&F for Tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)

S&F Soap dish, vitreous China white soap tray embedded in wall, approximate size 160x 160x9

S&f single piece/one piece vitreous china floor mounted pedestal type water closet pan (european pattern), shape ,size and color s decided by EIC with all necessary fittings required. Make- Jaquar, Hindware, Duravit

S&F vitreous china bowl shape wash basin alongwith undercounter with all necessary fittings, shape, design and color as decided by EIC . Make- Jaquar , Hindware, Duravit

S&F Bib taps 15mm bore, fancy type chromium plated ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. Make- Jaquar , Hindware, Duravit

S&F Pillar tap Mixture, size 15mm bore fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed . Make- Jaquar , Hindware, Duravit

S&F 15mm bore Stop valves, fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make- Jaquar , Hindware, Duravit

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms)

S&F Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms

S&F 32mm dia. Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and ther end fixed

S&F Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 fixed complete to wall, bore of pipe 32mm.

S&F PVC connections 15mm size with PTMT nuts of length 450mm

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F Laying of CPVC Pipes & fittings on walls/ceiling or laying in floors using adhesive ,pipe outer dia. 16mm, complete with all necessary fittings elbow, tee, union, bend etc. as specified. Make - Supreme, Ashirvad, Astral

S&F One light point or one fan point controlled by one switch with cables 1.5 sq. mm size, in pvc conduit pipe ,PVC single core sheathed (Copper conductor cable FRLS)

S&F One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq. mm size in pvc conduit pipe ,PVC single core sheathed (Copper conductor cable FRLS)

M&L Modular switch 1 way 6A, 1 module

Removing surplus excavted and demolished material to a distance exc 250m but n exc 500m and depositing where directed in soils.

Excel Engineers (BID ID -930747)