SPECIAL REPAIR TO SECURITY WALL WITH FENCING AND OR TOILET CUM BATHROOM (BLDG NO P-12) UNDER AGE BR DETT-III AND AGE EM OF GE 862 EWS

Amount

Sch 'A' Part-I (B/R Works) Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth for foundation, shaft, manhole, pier holes, laying of cables/pipes etc and n. exc 10sqm on plan and getting out in any type soil complete all as specified and as directed.

M&L for plain cement concrete, type D-2 1:4:8 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design mix-25) (20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns and the like, complete all as specified and directed

M&L for reinforced cement concrete M-25 (Design mix-25) (20mm graded stone aggregates) as in columns, pillars, piers, post, struts and the like, complete all as specified and directed

M&L for reinforced cement concrete M-25 (Design mix-25) (20mm graded stone aggregate) as in beams, cantilivers, bressmmers, lintles over 1.5 m span, complete all as specified and directed

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick wall/ stone masonry wall , finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of exterior weather coat paint in two or more colours pattern over and inlcuding a coat of primer, complete all as specified and directed by Engr-in-Charge.

S&F for mild steel TMT bars 10mm dia and over as in reinforcement , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W, grade E-250, complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as in stirrups, spacers and binders including binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W, grade E-250, complete all as specified and directed.

S&F for mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc not exceeding 10 Kg each brackets, conforming to Fe. 290. Gde-E-165 (brackets over 10 kg each to be measured under structural steel), including dismantling of old iron work, complete all as specified and directed.

S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) after dismantling of old unserviceble barbed wire complete all as specified and directed.

S&F for concertina coil 900 mm dia, 56 loops, 2.5mm core wire heavy galvanised (wire-275 GSM & strip-200 GSM), tensile strength of wire 1400-1500 N/Sqmm, weight 10 Kg / Coil, stretchable length 12M inlcuding securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc after dismantling of old concertina coil of any type complete all as specified and directed.

M&L formwork to sides of concrete foundation, footing, bases of colums, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar work, in rough finished flat surface of concrete, complete all as specified and directed.

M&L formwork to side of pillars, posts, struts, piers, columns and stanchions for rough finished surface of concrete, complete all as specified and directed.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick , complete all as specified and as directed.

Removing excavated material, not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down cement plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 20 mm thick rendering on other than fair faces of brick surface or stone masonry surface (internal wall) in cement mortar 1:6 surface finished even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 05 mm thick in cement mortar 1:3 on concrete surface of ceiling, finished surface even and smooth without using extra cement, complete all as specifed and directed.

M&L for preparation of new plastered surface of walls and applying two coats of exterior weather coat paint over and inlcuding a coat of primer complete all as specified and directed by Engr-in-Charge. Note:- Tint /Shade shall be approved by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over 1.5mm thick putty, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling surfaces and applying three coats of white wash, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4 including dismantling old tiles, complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 450x350x7 mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar 1:4 including dismantling old tiles, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm each and removing from site, complete all as specified and directed.

M&L for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 150 mm long of extruded section (ISI marked) ,complete all as specified and directed.

S&F for 100mm long butt hinges medium weight stainless steel (ISI Marked) , complete all as specified and directed.

S&F for extruded aluminium alloy handles size 150mm fabricated type anodised (ISI marked), complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level and removal of debris from site, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6, type C-1, (using 20mm graded crushed stone aggregate) as in path / sub base to receive tiles, complete all as specified and directed.

M&L for 75mm thick plain cement concrete, type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1, (using 20 mm graded crushed stone aggregates) as in surface channel and drains, complete all as specified and directed.

M&L for formwork of faces of walls, drain, channel, retaining walls, abutments, parapets, staircase railing and similar work including attached pillasters, buttresses etc vertical or to batter including fair finished surface of concrete in flat, complete all as specified and directed.

M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M & L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc, complete all as specified and directed.

M&L for treatment the soil under plinth protection at the rate of 5 litre of emulsion per sqm of surface area, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any position and any description not otherwise specifically provided for including removing debris outside MoD land complete all as specified and directed.

M&L for protection covering with providing and laying 40mm thick PCC 1:2:4 over existing roof padding including finishes with graded chips 6mm size with required surface area in the ratio of cement, sand, stone chips (1:2:4) and mixed with an integral water proofing compound @ 200ml pe 50kg bag of cement and curing properly, complete all as specified and directed.

Complete removal of existing water proofing treatment over RCC roof, projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing in low lying area where directed and providing following :- (a) Rendering 10mm thick in cement mortar 1:3 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound @ 2% by weight of cement. (b) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried. (c) After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface. (d) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm & minimum 3mm thick reinforced with polyster non wove fabric, APP membrane shall laid acorss the slop from lowest line of sloping roof towards ridge. (e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @ 1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coat. Note : (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed. (iii) Rate of WPC included in the quoted rate.

S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple, union etc and fixed after dismantling of old unserviceable tank, complete all as specifed and directed.

S&F for 15 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc including taking down existing GI tubing, complete all as specified and directed.

S&F for 20 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors etc including taking down existing GI tubing, complete all as specified and directed.

M&L in repair for 15mm bore gun metal, gate / globe valve with iron wheel head screwed on both sides for iron pipes and fixed, complete all as specified and directed.

S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed.

S& F in repair for GI wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18m and fixed with tinned tacks, or galvinsed wire staples including cutting, welding etc for steel window / ventilators, complete all as specified and directed.

S&F for 3 mm thick figured glass pin headed type and glazing with oil putty in squares n . exc 0.50 sqm in each pane, complete all as specified and directed.

S&F in repair for vitreous China water closet (squatt pan) Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe including trap set in concrete and removing debries from site, complete all as specified and directed.

S&F in repair for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S&F in repair for viterous china wash down water closet pan, white (pedestal pattern) with P or S trap, fixed in floor with brass screw including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, and inlcuding set of CP jet spray with flexible PVC pipe of superior quality anfd flush pipe, complete all as specified and directed.

S&F in repair vitreous China coloured, counter top wash hand basin, ovel type, size 550mm including cutting for and pinning in but exc waste pipe, complete all as specified and directed.

S&F in repair for 15mm bore bib tap cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete as in repair all as specified and directed.

S&F in repair for 15mm bore stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions and fixed complete as in repair all as specified and directed.

S&F in repair for PVC connection 15 mm x 600 mm including PTMT nuts at both ends screwed for iron pipe of 15 mm bore, complete all as specified and directed.

S&F in repair for 15mm bore Stop valve (concealed type), cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair for glass corner shelf with tempered glass, stainless steel brackets and polished chrome finish rail, complete all as specified and directed by Engr-in-Charge.

S&F in repair for sheet glass shelf assembly consisting 5.5 mm thick, sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repair for 15 mm bore brass chromium plated wash hand basin mixer hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F in repair for 15mm bore brass chromium plated brass wall mixer 2 in 1 two for hot and cold water mixing and one for shower rose, complete all as specified and directed.

S&F in repair 15mm CP brass health faucet (hand shower) inlet length 100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc, complete all as speicified and directed.

S&F in repair for PVC waste pipe 900mm long suitable for wash hand basins and urinals including connecting, complete all as specified and directed.

M&L for 20mm thick granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, cooking platforms, in steps, pillars, window cills, etc, laid over 20mm thick bedding in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite slab, rounding edges cutting, polishing etc including dismantling old granite slab, complete all as specified and directed.

S&F in repair for vitreous china half stall type urinals, aqua seal premium quality, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, waste pipe, grating and union for discharge pipe, complete all as specified and directed.

S&F in repair for CP soap dish holder with chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed

S & F in repairs brass chromium plated tubular towel rail 20mm dia 600mm long with and including one pair of brass chromium plated bracket fixed with CP brass screw and wooden/plastic cleats, complete all as specifed and directed.

S&F in repair for CP grating suitable for 75/100mm bore floor trap and fixed with white cement with or without hole, complete all as specified and directed.

S & F in repairs for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with and including MS clamps of suitable size, complete all as specified and directed.

M&L in repair for 110mm bore PVC (SWR) single socketed soil, waste and vent pipes in any length with or without ears with solvent joints laid in treanches and floors or fixed to wall, complete all as specified and directed.

S&F in repair for 110 mm bore PVC (SWR) bend of any radius with access door, complete all as specifed and directed by Engr-in-Charge.

S&F in repair for 75 mm bore PVC (SWR) bend of any radius with access door, complete all as specifed and directed by Engr-in-Charge.

S&F in repair for 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement and connecting to waste pipe including fixing with cement concrete 1:2:4, type B-1, complete all as specifed and directed.

S&F in repair for 15mm bore swan neck, pillar cock, cast copper alloy, with capstan heads, chromium plated, fancy type, screwd down high pressure , with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

M&L for construction of LLDPE septic tank (conventional) of capacity 25 users designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8, type D-2 in foundation, vent shaft, connection etc including returning , filling of soil at sides of tank, well ramming in layers and removing excavated surplus soil to a distance not exc 50m complete after dismantling or demolition of old unserviceable septink tank, complete all as specified and directed by Engr-in-Charge.

M&L for new concrete bed plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in bed drain pipes packing under haunching against the sides of pipes of 150mm bore other they are laid and tested including demolition of old PCC bed and removing debris outside MoD land, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick wall , finished the surface even and smooth without using extra cement mixing with water proofing compound as per manufacturer instructions, complete all as specified and directed. Note: Rate of WPC will be included in the quoted rate.

M&L for mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for providing pre-cast cement concrete landing, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1 using 20mm grading stone aggregate and setting in cement morter 1:6, complete all as specified and directed

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3.4 section) in cement mortar 1:2:4, type-B-1 of smooth finished and reforming benching, complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan and any radius in half brick tick wall built in cement mortar 1:4, complete all as specified and directed.

Sch 'A' Part-II (E/M works) Taking down carefully copper/ aluminum point wiring (light, fan, bell, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications, complete all as specified and directed.

M&L for point wiring for one light point/fan point/bell point controlled by one-one way switch with 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor unsheathed drawn through existing PVC conduit including modular metal flush box concealed in walls with suitable modular fittings for mounting of switches, sockets, fan regulator etc, and 1.5 Sqmm. (nominal area) single core FRLS, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making good the diturbed surfaces to match with the existing, compete all as specified and directed. (Note:- Three run of copper conductor of required size measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth)

Description all as per Serial item No 86 above but for one 3 pin 6 Amp socket outlet on independent board controlled by one 6 amp switch, complete all as specified and directed.

Description all as per Serial item No 86 above but for one 3 pin 16 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistraind copper conductor cable with 2.5 sqmm single core multistraind FRLS copper conductor cable as earthling lead, complete all as specified and directed.

S&F for modular white cover plate with frame 3 module complete all as specified and directed.

S&F for modular white cover plate with frame 8 module complete all as specified and directed.

S&F for modular switch 6 Amps, one way, one module, complete all as specified and directed.

S&F for modular socket outlet 2/3 pin, 6 Amp , 230 volts, 2 module complete all as specified and directed.

S&F for modular switch 16 Amps, one way, one module, complete all as specified and directed.

S&F for modular socket outlet 6 pin, 6/16 Amp , 230 volts, 2 module complete all as specified and directed.

M&L in repair for LED Tube light fitting, complete with 1x 20 watts, 220V, AC decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient, ready to use pack complete rewired premium 20W LED batten with eye soft technology & glare free diffuser and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height, complete all as specified and directed.

S&F for lamp holder insulated body PVC/ Polycarbonate type with back plate suitable for batten/angular/pendent fittings including LED lamp 9 watt, complete all as specified and directed.

S&F in repair for decorative mirror LED light fitting suitable for 10 watt LED lamp connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core, complete all as specified and directed.

S&F for exhaust fan of 300mm sweep, heavy duty, 1200 RPM electrical operated 230 Volts AC single phase, made with sturdy engineering plastic with all accessories and louver etc including cutting , drilling, nut, bolts and connecting to electric system , complete all as specified and directed.

S&F in replacement for MCB distribution board SPN 12 way, double door 240 volts duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 amp rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate with IP 42 protection complete all as specified and directed. (Note:- MCBs will be measured separately.)

M&L for MCB single pole 6 to 32 amp, 240 volts, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

M&L for MCB single pole & neutral 32 to 63 amp, 240 volts, 'C' series/ curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2010 including testing on completion including taking down existing unserviceable earthing complete all as specified. (Note:-Earth work, Earth strip and protection pipe upto board is included in the quoted rate)

M&L for sub main wiring complete with 2 run of 4 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC conduit of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 4 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable sub main wiring items, complete all as specified and directed. (Note : - 02 run of 4 sqmm single core copper conductor cable and 01 run of 4 sqmm single core copper conductor and 01 run of PVC conduit shall be measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth).

Supply, laying, jointng, connecting, testing and commissioning, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands , complete after taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of calbe shall be one length unless otherwise as directed by GE).

M&L for dry sand cushioning to underground cable, provided with a layer 8 cm thick before and 15 cm deep after laying and stretching jointing and testing the cable, complete all as specified and as directed (Note: Punned thickness of sand shall be measured and paid).

M&L for brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat, size 230mmx115mmx75mm over the cable abutting each other, complete all as specified and as directed.

S&F ceiling rose 3 phase/ PVC/polycarbonate isolated body surface bakelite 2 to 3 terminals, complete all as specified and as directed.

M/S Ramesh Chander Gandotra & Sons (BID ID -3144004)

SATVIR GUPTA ENGINEER and CONTRACTOR (BID ID -3145840)

m/s vishkarma construction (BID ID -3145996)

M/S BADRI NATH GUPTA (BID ID -3144013)

M/s Anil Engineers & Builders (BID ID -3143060)