Material Supply of Construction Work/Equipments Arrangement and Borewell Items in Panchayat Samiti Mandrayal Under Scheme of Rural Developement and Panchayati Raj Department

Amount

PART - C

Construction of tube well from ground level & up to 100 mtr depth to housing and assembly pipc of following sizes in all type of alluvium strata unconsolidated formation such as pebbles , bounders etc. by percussion/ rotary drilling method as per is 2800 part 1 : 1991 & is 2800 part ii 1979 (both amended upto date ) and technical specification with gravel as per IS 4097-1967 and its packing as per IS 2800 ( part I and ii ) 1979 as amended up to date(the work includes the cost of gravel and its primary packing and packing during development lowering of housing and straner assembly pips with supply and wrapping of coir -rope wherever necessary for arresting fine and send particles and development work but excluding the cost of housing and stramer pipe assembly )The work would be completed after obtaining send and free water. Nominal bore 125 mm dia

Constuction of Tube Well up to 100 mtr. Depth in all type of rocks by DTH system & over burden to accommodate casing pipe of following sizes in all types of soils & over burden including lowering of casing pipes, (if required) excluding cost of casing pipes, as per IS :2800 Part 1:1991 and IS : 2800 Part II: 1979 (both amended upto date ) and technical specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe. . Nominal bore 125 mm dia

Supply of ERW M.S black casing pipe ISI marked as per IS 1239 ( part I : 2004 ) medium of following sizes at sizes at site of work. 125 mm dia NB (Thickness of pipe 4.8 mm & mass of tube 16.40 Kg/m

Supply and installation of GI pipe 32 mm medium class B with pipe sockets ( heavy duty)

Supply and installation of ISI Mark II Hand pump set complete ISI Marked with silnder and 15 connecting rods etc.

Supply and installation of ISI mark connectin g rod as per departmental specifications. Of 3 meter length.

Construction of 185 cm. dia platform as per approval design & drawing of UNICEF.

Installation of India Mark II/III E.D I & II hand pump set complete on exisiting platform.

Supply & Fixing tube well cover of MS sheet 8 mm thick at top & 5 mm thick 100 mm wide shroud around the edge so as to from a cap on the top end of casing pipe with GI Nipple 45 cm long & two GI flanges at both ends in 80 mm sizes passing through a hole in the centre of MS sheet. A 25 mm socked with end plug shall also be welded over top plate. A GI nipple having outside thread of size ½” ( for installation pressure gauge ) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. 125 mm dia

Supply & Fixing MS clamp set of 50×6 mm flat from iron with nuts and bolts etc for holding the riser pipe assembly of submersible pump set.

Supply & Installation of single phase 1 HP ISI marked submersible motor pump set of five star rating by BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, instatllation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.

Supply & Installation of single phase 2 HP ISI marked submersible motor pump set of five star rating by BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, instatllation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.

Supply & Installation of single phase 3 HP ISI marked submersible motor pump set of five star rating by BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, instatllation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.

Supply & Installation of single phase 5 HP ISI marked submersible motor pump set of five star rating by BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, instatllation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.

Dol starter for 1 HP singal phase motor ISI marka & of reputed make

Dol starter for 2 HP singal phase motor ISI marka & of reputed make

Dol starter for 3 HP singal phase motor ISI marka & of reputed make

Dol starter for 5 HP singal phase motor ISI marka & of reputed make

Supply & Fixing of ISI marked single phase submersible motor cable