Construction of Yoga Park and Children Park in Both Sides of Creek (Near Port Community Hall) at V.O.Chidambaranar Port

Schedule - A - Creation of Yoga Park with an area of about 4 acres with recreation area at VOC Port Authority

CIVIL Works: Clearing scrub Jungle and Surface dressing of the Floor. The rate including hire charges of all machineries, removing of all rubbish from site, lead upto 50m, transportat charges and labour charges etc., complete complying with standard specification.

Earth work excavation and desposting on banks with initial lead of 10m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stony earth and earth mixed with small size boulders etc., As per SS 20B excluding hard rock requiring blasting Inclusive of 17,23 shoring shuttering, baling out water where ever necessary 24 and including refilling consolidation etc., complete in all respects complying with relevent standard specifications and as directed by departmental officers.

Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge. Back filling with available filling

Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge. back filling with brought from out side

Providing and constructing cast in situ hydraulic bored piles of specified diameter in M30 grade concrete using blended cement - slag cement with minimum cement content of 400kg/m³ in accordance with the structural engineers drawings and directions, but excluding reinforcement including cost of mobalization of all necessary plants, equipment's like piling rigs, temporary casing of appropriate length for setting out cardinal points and the removal of the same, boring in overburden, using bentonite mud circulation technique or any other method duly through all strata upto the foundation level of piles etc., complete all as approved by the departmental engineer. Further include dewatering, placing concrete by tremie pipe method, disposal of bored material outside the site. Including Chipping carefully cut off portion of piles as required without any damage to the piles and dressing the top and removing all the debris away from the site without any extra cost as directed including the cost of all tools, plants, conveyance, all labour, lead and lift required etc .,Conducting standard penetration test to identify the refusal strata for at least 1 pile in group and at least 25% of piles, comparing with refusal strata as identified in soil report and providing socketting into refusal strata by 1.00mt or into hard rock by 100% dia of the pile. (Length of pile for payment shall be measured up to bottom of pile cap). Pile 24'' Dia

Supplying and Filling with M ‐ sand in foundation and others sub structures for 100mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of M sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification.

Providing and Laying the Plain Cement concrete 1:4:8 (One cement Four sand and Eight broken Machine crushed stone jelly) using HBG Machine crushed stone jelly of size 40mm gauge for foundation and basement including de‐ watering if found necessary and laid in layers of not more than 15cms thick etc., including laying,compacting curing etc.,complete complying with standard specification and as directed by the departmental officers. The rates inclusive of Centering ,shuttering, strutting, propping,removal of form work if it is required and all leads ,lifts etc..

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer‐in‐charge. For column etc.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer‐in‐charge. For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, retainning wall drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. in-charge The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. Yoga Hall, Outdoor Toilet

Supplying, fabricating and fixing in position of steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer‐in‐charge.

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)‐1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer‐in‐charge. Yoga Hall, Outdoor Toilet

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 100 x 200 mm of solid cement concrete blocks, with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)‐1966* may be used for part replacement of fine aggregate up to a limit of 20 percent. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer‐in‐charge. Yoga Hall, Outdoor Toilet

Supply and constructing of Concrete decorative pillar type Jalli for parapet wall as per the design and choice of EIC. Rate includes proper fixing and top support fixing. Pillar with 9" C/C. Pillar Size 50 x 50mm x 900mm ht.

Plastering 12 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of fine P.sand) according to the specification. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer‐in‐charge.

Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine P.sand) according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer‐in‐charge.

Plastering 15 mm thick for external surfaces with cement mortar 1:4 ratio (1 of cement : 5 of fine P.sand) including water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer‐in‐charge.

Painting the Ceiling with Two coats of first quality Plastic Emulsion paint of approved colour over one coat of primer including thorough scraping, clean removal of dirt. The rate includes cost of materials, brushes, sand paper, rollers, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Supply and painting of two coats of Acrylic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer. Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer‐in‐charge.(Ceiling & Internal surface)

Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete.Rate including all brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer‐in‐charge.

Supplying and laying precast Rubber Moulded hydraulically pressed cement concrete paver block with pattern design of 50% colour and 50% Plain made of M40 grade concrete ‐ 83 mm thick of approved quality and colour, over the filling manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the inter locking paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer‐in‐charge.

Supplying and laying precast cement concrete Grass paver block with provision of grass 50%, 50% Grass pvaer and 50% Plain made of M40 grade concrete ‐ 83 mm thick of approved quality and colour, over the filling manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the inter locking paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer‐in‐charge.

Supplying and laying Naturally available Cobblestone of various size laid in circular motion ‐ Grnaite stone machine cut of 50mm thk, Rate includes escavation for 150mm, laying and compacting a thick gravel base for 100mm for stability and drainage, followed by a 50mm sand bedding layer for the pavers.

Supplying and laying precast Rubber Moulded hydraulically pressed cement concrete paver block with aniskid coating and premeable fast water drain, laying as per the manufacturer specification. rate includes all, materials like sand, cement, gravel, digging to necessary depth, laying, lead etc complete.

Supplying And Fixing of Rubber Moulded Grey Premium Concrete Kerb of Size 450X125X300mm Using M30 Concrete. The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The rate including Cost of all Matrials , Labour Charges , Wastages , Transportation Charges Loading Unloading Charges and Including Necessary Earth Work Pointing With cm. 1:3 To Full Depth Curing Thread Lining Etc Complete .

Supplying and laying of Flooring with Joint free double charged vitrified tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer‐in‐charge. (Including Skirting)

Providing Ceramic tiles of size 305 x 305 x 6mm flooring approved make and quality with plain/colour with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer‐in‐charge.

Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 1200x600x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer‐in‐charge.

Supply & Laying with the best quality approved Wooden Flooring or Sports Flooring over existing screed flooring as per site condition. Flooring plank of size 50 x 50cm 98% natural raw material as per the company specification. Rate includes Marmoleum fixed using 414 Euroflex Lino Plus adhesive, applied with a 2mm x 6mm V notched or B1 trowel. Rate includes Proper subfloor preparation it must be level, clean, dry, temperature, and humidity control. Installation step with one sheet at a time, Roll the sheet with a 68 kg roller to ensure proper bonding as per approved pattern / design as per the drawings by using irrespective of size and shapes including finishing the joints with Heat Welding or conventional method. Rate including all materials labour Charges, wastages, Necessary leads & lifts working at all levels transportation charges loading and unloading, preparation of surfaces, necessary hacking in RCC surfaces cutting to required shape tool, and plants fuel, curing, cleaning finished surfaces, protection using plastic sheet and removing the same before handling over as complete with all respects complying with relevant standard specifications and as directed by the Client/Engineer in Charge.

Supply and Laying flooring with best quality approved colour 18mm thick Flamed Steel Grey Granite Slab for Staircase of available size not less than 1220 x 600 mm machine cut and set in C.M 1:4 (1 of cement: 4 of manufactured sand) 20 mm thick topped with white cement slurry (for surface contact of the bottom of the granite slab) as per approved pattern, including finishing the joints with matching shade, cement slurry, cutting, edge chamfering and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading. preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, antiskid grooves,tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum/Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supplying and fiting the sunken slab area by Broken bricks by adding CICO NO 1 or approved equivalent admixture including applying two coats not less than 2 mm thick of TAPECRETE Acrylic Polymer Based Waterproof Coating, over the final coat of cement plaster 12 mm thick with cement sand mortar 13 mixed with water proofing compound like CICO No.1 at the rate specified in the manufacturer's specification after entire completion of laying pipes, sanitary fittings etc. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc as complete with all respects complying with relevant standard specification and as directed by the Client/Engineer-in-charge. Including applying two coats not less than 2 mm thick of TAPECRETE- Acrylic Polymer Based Waterproof Coating, over the plastered surface as including final coat of cement plaster 12 mm thick with cement sand mortar 13 mixed with approved water proofing compound like CICO No.1 or approved equivalent conforming to IS 2645 at the rate specified by the manufacturer over coated surfacepreparation of surface, finishing, curing etc. all complete at all levels as per manufacturer's specifications and as directed.

TERRACE WATERPROOFING: Supply and laying water proofing treatment for terrace covering the following order and consisting of following operations. i) Making ' V ' grooves at the construction joints of size 20 x 20 mm and filling the "V" Groove with CICO No. 3 Quick Setting Waterproofing Compound admixed with cement. The roof slab / gutter slab shall be thoroughly cleaned to remove debris and dust, and applying 2 coats not less than 2 mm of polymer based Elastomeric Coating like TAPECRETE - RTU compound and cured for 7 days and followed by a layer of 20 mm thick cement mortar 1:3 admixed with CICO NO:1 (or) other approved equivalent make shall be spread over the prepared surface. The parapet side wall / gutter wall shall be thoroughly cleaned to remove all dust particles and a layer of 15 mm thick C.M 1:3 shall be laid to a height of about 300 mm above the top of the terrace/Gutter slab on the Parapet / Gutter side wall admixed with water proofing compound like the CICO NO:1 or approved equivalent make. Providing, supplying, mixing, applying two coats of ready to use two component Acrylic polymer modified cement based, flexible, water proofing slurry like or approved equivalent to a thickness of 2 mm over the plastered surface of operation as per manufacturer's specification and as directed.(Plan area of Terrace only will be measured for payment )

Providing and laying water proofing treatment to vertical and surfaces for sunken portion of depressed portions of W.C., and the like consisting of :i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontalsurface. ii) IInd course of 20mm cement plaster 1:2 (1 cement : 2 coarse sand)mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7Kg. per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.)

WPC Door frame : Specification: Providing factory made Pre Laminated WPC Door Frame of the size 100 X 60mm with a Density of 900 kg/cum wall thickness of 11mm made out of 70% of virgin polymers, 15% of mineral fibers and rest 15% of additives and requisite chemicals. with 6nos of 5mm long screw. The door frame shall be fixed to the wall by using 80 mm long screws through the frame frame with the help of PVC Complete complying with the standard Specification. the door frame should be got approved from the Executive Engineer before use on work. Providing of 35mm thick factory made pre-laminated WPC Flush Door Shutter, with PCV LAminate of inner end and 1mm laminate on external side, 100% waterproof, termite-proof, durable, and offering sound and thermal insulation resistance to moisture, bugs, and aging, and their eco-friendly nature. Mortise Lock with 12" SS Tower bolt, 5" SS Hinges - 4 nos The door shutter and frame should be got approved from the Executive Engineer before use on work

Providing & fixing at site Flush door shall be of 32.0mm Commercial grade flush door with 1.0mm lamination on both the sides, and central portion to have 8.0mm plain float glass to be fixed with help of teak wood beadings. The Door is to be fixed to existing wooden partition/wall with heavy duty 5" Stainless Steel hinges, and shall have godrej Or equivalent mortice lock. All the edges of the door to be covered with 35 x 12 mm Teak wood beadings, The cost shall include Frame of 1st class Teak wood Frame of 150mm x 50 mm, all labour, materials, mortice lock, tower bolt inside, door stopper, Door Closer strictly as per the given design & drawing etc complete.

Providing and fixing at site 12.0mm toughened glass fixed glazing to be fixed with SS patch fittings at the site including filling of silicon sealant at all edges, gaps, wherever necessary as per the site condition, all materials, labour etc complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Providing and fixing welded M.S. grills to the window openings,along the details as per drawing with necessary screws, bolts and fixed with necessary M.S. lugs embedded in masonry with C.C. 1:2:4 and finishing the surface neatly. Rate shall welding and consumables, etc. complete, as directed. Design of grills and the size of members to be used shall be got approval before put into use & as directed by the Engineer-in-charge.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. ( The make quality and colour of paint should be got approved by the executive Engineer before use on works.)

Supply and fixing of signage board at required places of specified size,directed by the departmental engineer in charge,the rate is inclusive of all labour charge, fixing and transportation etc.complete (internal, external & Main Entrance Signage)

Fire Extinguisher: Supply and fixing of Water CO2 stored Pressure Type 9 liters capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, wall mounting bracket, safety clip, etc., as directed by the Departmental Officers. - SOR - BD 950

Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., Including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY / FIRST / EQUIVALENT - SOR - BD 991

Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure

Shrubs, Hedges, Shrubbery and Groundcover Plantation : Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m, lift up to 1.5m complete. Hedges

Shrubs, Hedges, Shrubbery and Groundcover Plantation : Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m, lift up to 1.5m complete. Shrubs

Providing well grown Creepers with Pot, Creepers with healthy, vigorous, free from diseases and pests, well-developed and healthy root systems is essential with good soil and required manure. Rate includes wires, nets for the creepers to crawl around the aluminium pergola. Density of pergola minimum 10 nos per rm. Rate includes maintenance till handover.

Providing well grown trees with minimum average girth of 10 cm and minimum height of 5 M above finished level after plantation of specified variety , at desired location & at specified distances. Achieving finished grade level. Planting the tree with appropriate anchoring, levelling the top soil surface as specified after plantation, staking to balance the tree. Including transport to the site & planting , preparation of tree basin, watering & maintaining for 1 month after completion of plantation and replacement of casualties till 1 month.

Providing, Fixing,Testing & Commissioning of Drip Pipe irrigation system with all necessary fittings, pumps and related civil works, including all labours, all complete

Supply and installation of Powder coated Aluminium Louvered Pergola. Main aluminum Post of section 120 x 120 x 1.4mm with main beam of size 170 x 47 x 1.4mm, internmediate beam of size 170 x 25 x 1.4mm and louvers of size 135 x 30 X 1.2mm. Colour: Wooden Shade. Louver Spacing and Size of pergola refer the drawing

Providing and laying Precast Seating 1500mm X 890 mm 80mm thick slabs using M30 grade of concrete.Reinforced suitably to promote long use and to prevent damage during handling, transportation & erection each bench consists of 2 nos L - Shaped base support in Cement colour back height 890 mm front height 450 mm and base width 690mm and 1 nos. reinforced concrete plank in red colour of size 1500mm X 425mm X 50mm and bench top & back planks are treated with special anti - corrosive, water proof coating so as to make surfaces glossy and water proof the cost includes material cost, labour charges, transport charges etc.,as directed by Engineer-in-Charge

Supply and fixing of 120Litre Heavy duty trash can with specially designed bottom for minimizing the breakage and UV protested colour from sun rays. The trash can is fitted with wheel at bottom for easy mobility. The strong lid with smooth curved upper surface for perfect fit to ensure preventing unwanted smells to escape and rain water to seep through. The rate is inclusive of transportation, laoding and unloading charges.

Supply of Compactor 1100 Litres Bin made of galvanized Sheet, thickness of 2.5 mm, side and bottom 3 mm , MS angle and MS channel and 8" heavy duty fibre wheel as directed by the department officers. The cost includes the labour charges, transportations all complete as per Engineer in Charge

GRAVEL : Supply, deliver & install 60mm thick gravel layer on bidum geotextile and gravel fix (to later detail) Bidum to be included in price

INTERIOR WORKS - YOGA HALL SIDE: Supply Providing and fixing GYPSUM BOARD FALSE CEILING in levels as per the detailed drawing - made up of G.I frames as specified by Gypsum India/Saint -Gobain Gyproc and 12mm thick Gypsum board with suitable suspenders fixed to the ceiling. Ceiling section, perimeter channel of size 20X27X30 mm and 0.55 mm thick for light fittings, AC Grills, diffusers, suspenders etc. shall be standard sections supplied by Gypsum India/ Saint Gobain. Spacing of intermediate channels shall be at 1200 mm c/c and ceiling section at 457 mm c/c. The work includes taping and jointing, applying primer, two or more coats of plastic emulsion paint of approved shade ICI/ ASHIAN PAINTS make, making cut-out for light fixtures /fittings, etc. The Final coat shall be done with FOAM ROLLER and no brush marks should be visible. Providing of perimeter channels / beading etc. as per drawing complete in all respects.(All measurement in sqft only and finished surface area shall be measured)

PLUMBING WORKS - YOGA HALL SIDE: Supplying & fixing in position 15 mm dia brass/ C.P screw down / C.P Pillar Tap (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work). 15mm dia CP Pillar Tap (IWC)

Supplying, laying and jointing CPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. (Above Ground Level) (Internal Water supply) 20mm Dia Cpvc Pipes

Supplying, laying and jointing CPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. (Above Ground Level) (Internal Water supply) 25mm Dia Cpvc Pipes

Supplying and fixing in position the best quality and variety sizes PVC Soil/ Waste /Rain water pipes 6Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the dismantled portions to the original condition complying with standard specification. (Internal, External & Rain water system) 110mm Dia

Supplying and fixing in position the best quality and variety sizes PVC Soil/ Waste /Rain water pipes 6Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the dismantled portions to the original condition complying with standard specification. (Internal, External & Rain water system) 75mm Dia

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, PVC clamps and screws, making good the dismantled portions to original condition with necesscary brick work and plastering wherever necessary scaffolding charges above ground level upto 4 m height. (Internal,Terrace&External Water supply ) 32 mm Dia Upvc Pipe

Supplying & fixing in position first quality & approved variety of various dia Gun metal Gate valves ( Heavy type ) with I.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements. 32 mm Dia

Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. Internal Toilet Entry & Terrace - 32mm dia

Supply, erection, testing and commissioning of Gun Metal Non-Return Valve of size 50mm dia including necessary MS flange of table’E’, gaskets, bolts & nuts, etc., installed at pump house delivery line for the purpose of priming to suction line so that to control one way including conveying, fixing and incidental charges etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER /EQUIVALENT. 32mm dia

Supplying & fixing in position C.I.Nahini trap /Floor trap of various sizes with best stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes as directed etc., complete, complying with standard specification (The C.I.Nahini trap should be got approved by the Executive Engineer before use on works ).

Supplying and fixing Back Inlet Urinal(white colour) of Jauqar Make with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple, and suitable screws, shellac etc., complete. The rate including cost of all materials, labour charges for fixing and transportation etc. completed as directed by Engineer-in-Charge. URS-WHT-13253N

Supplying and fixing in position Indian water closet of size 580 x 440mm, glazed earthern ware of approved quality and colour with 'P' trap or 'S' trap confirming to IS:2556-part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One of Lime, Two of Sand, Five of Brick jelly) 100mm thick and by dismantling brick masonry, reinforced finishing to the required slope and including giving necessary connection to PVC soil pipes cement concrete roof / floor slab and making good the disturbed portion to origional condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works) JAQUAR ORISSA PAN

Supply and fixing in position white European Water Closet of Jaquar make with Soft close double flapped seat cover, pan connector with comprising the P- trap/"S" trap, C.P brass hinges and including labour, all fittings, making the required size including cutting the wall, and fixing the flushing cistern properly, redoing the plastering and packing the wall with smooth finish, the side gap between EWC mouth and pan connector to be filled with silicon sealant etc.complete, complying with standard specification and as directed by the Department officers. The quality and make of EWC should be got approved by Concern department Engineer before use on work. complete complying with standard specification and as directed by the Departmental officers KUS-WHT-35851S300UF

Wash Hand Basin of size 565 x 425 x 140 mm with all accessories such as 32 mm Dia C.P. Waste coupling, Rubber plug, Bottle Trap, Silicon, White Cement etc., KUS-WHT-35935

Supplying and fixing in position Mirror of size 900x750mm of approved quality and brand of size with necessary plastic back PVC frame with bottom stand of approved color with brass screws rowel plugs etc complete complying with standard specification and as directed by the Departmental officers The quality of mirror should be got approved by the Executive Engineer before use on work

Supplying and fixing the best quality approved make of bip cock with C.P health faucet wall hook one metre long fixable tube,angle cock with wall flangle including cutting and making good the walls whewrever requred etc complete, complying with standerd specification and as directed by the department officers. the quality and make of health faucet should be got approved by concern department Engineer before use on work.

Supply , installing, Testing & commissioning 15mm nominal bore CP brass angle valve of approved make or equivalent as directed by the Engineer-in-charge.

Supplying and fixing best approved best quality Soap Dispenser complete complying with standard specifications. (The soap Dispenser should be got approved by Executive Engineer before use on works).

Supplying and fixing approved best quality aluminium anodised towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supply and Fixing of BIO Septic Tank - 6000 Ltr Capcity Rate includes maintanance till project completion

Hydropnuematic System - for external and yoga Hall Toilet and RO UV Water Cooler

Supply fixing, texting and commisioning of RO UV Water cooler with 120 ltr capacity of 3 faucet, 90 LPH Purification capacity, min 3 stage water purification. The rate includes the cost of Material, labour charges, loading & Unloading and Transportation charges etc., complete and as per the standard specification.

Electrical Installation with Lighting arrangements, HVAC, CCTV System and PA System: Supplying, installation testing and commissioning of 200 KVA, Outdoor type, distribution transformer, suitable for 3 phase, 50HZ, AC supply, Dyn 11 vector group,core made of good quality CRGO, windings made of copper wound with approved danger and arc flash signages and with all components. Voltage Grade : 33 /0.433 KV, Type Of Cooling : ONAN, Type of Tap Changer : On Load Tap Changer (+10% to - 15% in step of 1.5%), Allowable Loss : As per latest ECBC

Metering Panel - Supply, Installation, Testing and Commissioning all metal floor mounted meter board incorporated with the following. The cost of the foundation channels shall also be including in the rate. The Cost shall also includes unloading and positioning.3Nos.250Amps TP cutouts with 200Amps neutral link propoersly fixed on the sheet steel with necessary accessories with 200Amps 4P Aluminium Busbar. The Phase busbar shall be 50x6mm and the neutral busbass shall be 50x6.The Board shall be provided with 2Rus of 25x6mm Aluminium busbars of earthing.Space for fixing 6Nos of direct operated three phase energy meter with necessory accessories.3Sets of 3Nos. 32A TP cutout with neutral link properly fixed on the sheet steel.1Set of 3Nos. 200A TP cutout with neutral linkls propoerly fixed on the sheet steel.3Sets of interconnection between the coutout,MCB and the Meter shall be dobne with 50Sq.mm Cu and 16Sq.mm.Cu PVC insultated strandard copper conductor wires with crimped type lugs / sockets, etc.RYB indicating Lamps of LED Clustered type and Control toggles switch per each phase shall be provided for the Main EB cut-out chamber door. CRCA sheet Thickness : 14SWG for door and Frames 16SWG for others. Foundation Channel - 3mm thick Cable Gland - 14SWG Painting: Powder Coated RAL 7032 and Black Color for the foundation channel.

Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter 1no and 1no 250A Four Pole Change Over Switch, Main 1no EB source Incoming 250A 4Pole MCCB and Main 1no DG source Incoming of 250A 4Pole MCCB's, and 1no 125A 4Pole MCCB, 3nos of 63A 4Pole MCCB's for O/G with suitable copper bus bar (33x6mm) having three phase Multifunction meter with line indicators for erecting the indoor panel board complete etc., The rate is inclusive of transportation charges etc complete. The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.

Supply and fixing of 7 segment 12 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 12 ways in one segment) (3 x 12 ways in each segment) and seperate provision for MCB / Isolators ( totally 36 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. (Without ELCB).

Supply and fixing of 8way Single pole and neutral MCB sheet steel enclosure with IP 42 protection distribution board double door with 1no. 32A DP MCB as incoming and 6Nos of 10A SP MCB for Outgoing in flush with wall and making good of the concealed portion with earth connection only The MCB DB and MCB's should be with ISI mark. ( Like MDS / Legrand make ) (SD-167)

Supply and Clamping of 4C x 120 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-225)

Supply and Clamping of 4C x 70 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-225)

Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection ( SD - 189)

Supply and fixing of 300 mm (12") sweep (heavy duty) AC exhaust fan complete with provision of holes in the wall including all required accessories. (SD 114)

Supply & Installation of concealed / ressessed/ surface light point/ fanpoint/ callbell point wiring using 600V FR grade 2R (P+L) x 1.5 Sq.mm for Raw Power & 1.5mm for UPS with copper conductor PVC insulated wires pulled through heavy gauge PVC conduits including Circuit Wiring from Lighting DB / Panel to Each Switch Board. Note- 1 (one) circuit/line should be covered two counter. Primary light points including the cost of 5A switch

Supply & Installation of concealed / ressessed/ surface light point/ fanpoint/ callbell point wiring using 600V FR grade 2R (P+L) x 1.5 Sq.mm for Raw Power & 1.5mm for UPS with copper conductor PVC insulated wires pulled through heavy gauge PVC conduits including Circuit Wiring from Lighting DB / Panel to Each Switch Board. Note- 1 (one) circuit/line should be covered two counter. Secondary light points looped from the above point

Supply & Installation of concealed / ressessed/ surface light point/ fanpoint/ callbell point wiring using 600V FR grade 2R (P+L) x 1.5 Sq.mm for Raw Power & 1.5mm for UPS with copper conductor PVC insulated wires pulled through heavy gauge PVC conduits including Circuit Wiring from Lighting DB / Panel to Each Switch Board. Note- 1 (one) circuit/line should be covered two counter. 5A plug point as primary point independent mounted on wall / partition / on work station, etc.

Supply & Installation of concealed / ressessed/ surface light point/ fanpoint/ callbell point wiring using 600V FR grade 2R (P+L) x 1.5 Sq.mm for Raw Power & 1.5mm for UPS with copper conductor PVC insulated wires pulled through heavy gauge PVC conduits including Circuit Wiring from Lighting DB / Panel to Each Switch Board. Note- 1 (one) circuit/line should be covered two counter. 15A plug and 15amps switch point as primary point independent mounted on wall / partition , etc.

Supply & Installation of concealed / ressessed/ surface light point/ fanpoint/ callbell point wiring using 600V FR grade 2R (P+L) x 1.5 Sq.mm for Raw Power & 1.5mm for UPS with copper conductor PVC insulated wires pulled through heavy gauge PVC conduits including Circuit Wiring from Lighting DB / Panel to Each Switch Board. Note- 1 (one) circuit/line should be covered two counter. 20A plug and 20amps switch point as primary point independent mounted on ceiling for industrial fan .

Wiring with 2R x 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Light / Fan point.(6Points / Coil) Lower end (SD 314)

Supply and run of 2 of 2.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection 1 of 1.5sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade and making good of the concealed portion with suitable colour.

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe in wall and ceiling with continuous earth wire connection 1 of 2.5 sqmm (36 /0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade and making good of the concealed portion with suitable colour. (SD-430)

Supply and fixing of 25A DP plug and socket in the sheet enclosure with 25A DP MCB in flush with wall with earth connection.(For AC Plug)

HVAC: Supply and Installation of 14000 CFM AHU UNIT. Double-skin construction, floor-mounted, with an aluminum or galvanized steel framework.Modular or monolithic design, with individual access panels for maintenance on each section.External Skin: 0.8mm pre-coated galvanized steel sheet (GSS) or 1.0mm aluminum.Internal Skin: 0.6mm galvanized steel sheet (GSS) or stainless steel (SS) for corrosion resistance.Access Doors: Hinged access doors with latches and airtight gaskets for fan and coil sections.Drain Pan: 22-gauge stainless steel (SS 304 or SS 316) for corrosion resistance, with proper slope for drainage and insulated to prevent condensation.Fan Type: Centrifugal fan, either forward curved (FC) for low static pressure or backward curved (BC) with airfoil blades for higher efficiency and lower noise. Motor: Three-phase motor (415V, 50Hz) with the appropriate horsepower, considering a safety margin. Drive: Belt-driven or direct-driven with Variable Frequency Drive (VFD) for energy-efficient, variable airflow control.Chilled water or DX type, with multiple rows to achieve the required cooling capacity. Tube Material: Seamless copper tubes, 1/2-inch or 3/8-inch diameter. Fin Material: Aluminum fins, mechanically bonded to the tubes. Fin Pitch: 8, 10, or 12 Fins Per Inch (FPI), depending on the application and filter grade. Valves and Controls: Include water circuiting for chilled water applications (e.g., control valves, temperature sensors). A dedicated AHU controller or integration with a Building Management System (BMS) for automated control and monitoring.

Supply of Toshibha make VRF outdoor unit for the above mentioned capacity. Refrigerant should be R410A(Top Dishcharged)

Cost towards supply and fabrication of 1.2M Dia AC DUCT made of Galvanized steel sheet (GSS) 18g, coated with a minimum thickness of zinc of 275 g/m². Spiral lock seam, which provides high strength, rigidity, and superior air tightness compared to ducts with longitudinal seams. Adherence to SMACNA HVAC Duct Construction Standards, specifically the 'Round Industrial Duct Construction Standards' for larger, high-pressure applications.Due to its size and weight, the duct must be properly supported from the building structure using independent hangers to prevent sagging. Support spacing and material (e.g., galvanized MS hangers) should conform to SMACNA and local building codes.

Supply and Laying of 5/8" and 3/8" Copper pipe. (SR 2023-24, Pg.no. 154, It.no. XIV, M-1990)

LIGHTING: Supply, installation, testing and commissioning of LIGHT POLES:(i) Steel tubular poles with base plate of size 300x300x6mm welded at bottom, necessary hole for cable entry and earthing stud welded at standard height including painting . Fabricated pole shall be made form Galvanized Iron (GI) pipes or mild steel (MS) pipes The pole shall be complete with cap and base plate, Light pole suitable to accommodate Post top luminaire.Hollow pole of thickness not less than 2.3 mm. Earthing terminals for earth connection. Cable will be terminate at luminaire through hollow pole.Pole is black/grey in colour having corrosion resistance coating on it. Suitable for outdoor application. Height : 4.5-5 mtr,Top dia: 76 mm, Bottom dia: 140mm

100W LED Street Light Fixture (BRP409 LED115 CW SLC FG PSU GR V2) with dimmable driver

200W LED Four sided Flood Light Fixture for High Mast

Supply, installation, testing and commissioning of BOLLARD: Outdoor type, Integral LED lamp, Decorative, Luminaire: Non corrosive Aluminium, Aluminium plate for bolting onto foundation. Robust Design, High Luminous efficiency at reduce wattage , Cable entry for main supply cable. Earthing connection provision shall be provided. Minimum protection of IP 54. Operate on 240V, 50 Hz AC supply. Earthing terminals for earth connection, Rating: 7W LED

Supply, installation, testing and commissioning of UPLIGHT:, Landscape luminaries for direct spot light. Luminaire with arrangement of connecting cable and bracket for permanent installation on wall or ceiling or landscape area.Suitable for outdoor application.Contain Clear tempered safety glass diffuser. Swivel range in horizontal axis. Earthing terminal for earth connection.Prewired LED driver Suitable for operation on 230V, 50Hz AC supply, Rating: 6W LED, Two way connector ( IP 67)

Supply, installation, testing and commissioning of DOWN LIGHT: Luminaire made with Non corrosive Aluminium frame,Toughen clear glass diffuser. Suitable for wall mounting. Aluminium base for mounting on wall, Integral LED lamp with power supply connection cable arrangement outside the luminaire. Earthing terminal for earth connection. Suitable of outdoor use. Prewired LED driver, Suitable for operation on 230V, 50Hz AC supply Rating: 5WLED

Supply and fixing of 9W LED 4000 K Round type recessed light on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 12W LED 4000 K Round type recessed light on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 6W LED 4000 K Round type recessed light on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing 4000K Profile Light with 220 count LED strip fiting on false ceiling as cove light with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing 1400mm Ceiling Mounted Fan - high speed atom

Supply and fixing Wall mounted Fan 24" - high speed - almonard

ELECTRICAL CABLE: Supply of 4C X 25 sqmm, Al, XLPE cable

Supply of 2C X 16 sqmm, Al, PVC cable

Supply of 2C X 6 sqmm, Al, PVC cable

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 4 X 25 sq.mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 2 X 16 sq.mm (22mm)

Supply and erection of PVC copper insulated and sheathed 2 core circular flexible wire:¬Size 1.50 sqmm (48/0.20mm)

Distribution Board: Supply, installation, testing and commissioning and interconnection of wiring of wall mounted double door distribution board (8 way, 8+24 modules) having plane door, IP 43 protected, as per IS 8623 including blanking plates, insulated busbar and earth bar, circuit identification label i) Incomer: 1 no. 80 A TPN MCCB of 40kA and ii) Outgoing: 4 nos. each of 25A TPN D curve MCB of 10 kA and 4 nos. each of 16A DP MCB

EARTHING: Supply and installation of earth pipe electrode as per IS 3043 complete with 3mtr long with 40mm dia 'B' class G.I. pipe Including 750mm x 750mm x 3mtr long excavation and construction of 850mm x 850mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm x 10mm cast iron / RCC cover with frame and lockable facility. The plate electrode shall be filled with alternate layer of salt and charcoal as required full depth. The Cover shall be heavy duty to suit heavy vehicle movements: (2 per mast is mandatory, 1 for lightning and one for electrical).Supply of control panel housing/feeder pillar suitable timer contractor circuit for Automatic switch ON and switch OFF of the mast at a pre-set time with acessories. ( Make: Philips )

Supply and installation maintenance free Copper Earthing System comprising of 30mm dia and 3 mtr. long earth electrode with chemical filling.

Supply and Run of 8mm Copper Round Conductor complete as necessary clamps / supports on wall / floor / ground for earth connection

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. ( SD-233)

Supply, fabrication, of Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with bitumen paint including accessories wooden plugs, screws, fastener etc., 50mm x 6mm GI Flat

CCTV: Supply, Installation, Testing and commissioning of 32 channel 8 SATA NVR 2nos with 8TB Hard Disk Drive, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency,Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony).

Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection) ● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB, ● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. (Make: Dahua/Panasonic)

Supply, Installation, Testing and Commissioning of 55" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR h) True colour generator i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung).

Supply and fixing of outdoor 4 x 6 PVC box with 102mm x 77mm x 102mm with all fixing accessories.

Supply and Laying of CAT 6 armoured cable in 50mm dia HDPE pipe below the ground complete with all necessary accessories etc.. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

Supply and fixing of POE 24 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line.

Supply and Fixing of Rack with Accessories -Higher end 4 U Rack with LNS unit and fan extra for the above rack.

Supply and Instalatin for 1KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2 Hours back up.

Supply, Erection of 6m Length pole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges.

Supply, Installation,Testing & commisioning of 480 watts P.A Mixer Amplifier with the output power of 1350 watts maximum, 500watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 watts RMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of 2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja SSA 10000 /Bosch or its equivalent).

Supply, fixing & Testing of 10" gooseneck with suitable base incorporates separate bush switches for momentary and dynamic microphone with 600ohm impedence and has 2.5mv/pa sensitivity and frequency response ranging from 50-15000hz with multi tone chime model.(Make:-ACM66 Ahuja/bosch/its equivalent)

Supply and run of 2core 1.5 Sqmm Un armoured speaker cable with 25mm PVC pipes concealed wall and ceiling etc. complete.

Supply & Installation of custom built M.S Powder coated wall mounting Audio rack with Lock & key for housing of Amplifier & Player / Recorder confirms to EIA-310, IEC-60297 and able to withstand the load of 40kg with welded construction made up of CRCA steel with suitable height, width and depth.

Schedule - B - Creation of Children's Park with recreation area at VOC PORT AUTHORITY

CIVIL WORKS: Clearing scrub Jungle and Surface dressing of the Floor. The rate including hire charges of all machineries, removing of all rubbish from site, lead upto 50m, transportat charges and labour charges etc., complete complying with standard specification.

Earth work excavation and desposting on banks with initial lead of 10m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stony earth and earth mixed with small size boulders etc., As per SS 20B excluding hard rock requiring blasting Inclusive of 17,23 shoring shuttering, baling out water where ever necessary 24 and including refilling consolidation etc., complete in all respects complying with relevent standard specifications and as directed by departmental officers.

Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge. back filling with brought from out side

Supplying and Filling with M ‐ sand in foundation and others sub structures for 100mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of M sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification.

Laying the Plain Cement concrete 1:4:8 (One cement Four sand and Eight broken Machine crushed stone jelly) using HBG Machine crushed stone jelly of size 40mm gauge for foundation and basement including de‐ watering if found necessary and laid in layers of not more than 15cms thick etc., including laying,compacting curing etc.,complete complying with standard specification and as directed by the departmental officers. The rates inclusive of Centering ,shuttering, strutting, propping,removal of form work if it is required and all leads ,lifts etc..

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer‐in‐charge. For column etc.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer‐in‐charge. For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

Providing and Laying M 25 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, retainning wall drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. in-charge The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. Outdoor Toilet in Compound Wall

Supplying, fabricating and fixing in position of steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer‐in‐charge.

Cost towards Supply and fixing of PEB structural componenets as per the drawing with Fe 350 steel. Rate includes proper zig zig welding, painting the members with Anti Corrosion paints. Rate also includes all necessary supports, Fischer Bolts, Hilti Chemicals, scaffolding etc complete.

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)‐1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer‐in‐charge. Outdoor Toilet

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 100 x 200 mm of solid cement concrete blocks, with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)‐1966* may be used for part replacement of fine aggregate up to a limit of 20 percent. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer‐in‐charge. Outdoor Toilet

Plastering 12 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of fine P.sand) according to the specification. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine P.sand) according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering 15 mm thick for external surfaces with cement mortar 1:4 ratio (1 of cement : 5 of fine P.sand) including water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer‐in‐charge.

Painting the Ceiling with Two coats of first quality Plastic Emulsion paint of approved colour over one coat of primer including thorough scraping, clean removal of dirt. The rate includes cost of materials, brushes, sand paper, rollers, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Supply and painting of two coats of Acrylic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer. Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer‐in‐charge.(Ceiling & Internal surface)

Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete.Rate including all brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer‐in‐charge.

Supplying and laying precast Rubber Moulded hydraulically pressed cement concrete paver block with pattern design of 50% colour and 50% Plain made of M40 grade concrete ‐ 83 mm thick of approved quality and colour, over the filling manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the inter locking paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer‐in‐charge.

Supplying and laying precast cement concrete Grass paver block with provision of grass 50%, 50% Grass pvaer and 50% Plain made of M40 grade concrete ‐ 83 mm thick of approved quality and colour, over the filling manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the inter locking paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer‐in‐charge.

Supplying and laying Naturally available Cobblestone of various size laid in circular motion ‐ Grnaite stone machine cut of 50mm thk, Rate includes escavation for 150mm, laying and compacting a thick gravel base for 100mm for stability and drainage, followed by a 50mm sand bedding layer for the pavers.

Supplying and laying precast Rubber Moulded hydraulically pressed cement concrete paver block with aniskid coating and premeable fast water drain, laying as per the manufacturer specification. rate includes all, materials like sand, cement, gravel, digging to necessary depth, laying, lead etc complete.

Supplying And Fixing of Rubber Moulded Grey Premium Concrete Kerb of Size 450X125X300mm Using M30 Concrete. The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The rate including Cost of all Matrials , Labour Charges , Wastages , Transportation Charges Loading Unloading Charges and Including Necessary Earth Work Pointing With cm. 1:3 To Full Depth Curing Thread Lining Etc Complete .

Providing Ceramic tiles of size 305 x 305 x 6mm flooring approved make and quality with plain/colour with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer‐in‐charge.

Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

WPC Door frame : Specification: Providing factory made Pre Laminated WPC Door Frame of the size 100 X 60mm with a Density of 900 kg/cum wall thickness of 11mm made out of 70% of virgin polymers, 15% of mineral fibers and rest 15% of additives and requisite chemicals. with 6nos of 5mm long screw. The door frame shall be fixed to the wall by using 80 mm long screws through the frame frame with the help of PVC Complete complying with the standard Specification. the door frame should be got approved from the Executive Engineer before use on work. Providing of 35mm thick factory made pre-laminated WPC Flush Door Shutter, with PCV LAminate of inner end and 1mm laminate on external side, 100% waterproof, termite-proof, durable, and offering sound and thermal insulation resistance to moisture, bugs, and aging, and their eco-friendly nature. Mortise Lock with 12" SS Tower bolt, 5" SS Hinges - 4 nos The door shutter and frame should be got approved from the Executive Engineer before use on work

Providing & fixing at site Flush door shall be of 32.0mm Commercial grade flush door with 1.0mm lamination on both the sides, and central portion to have 8.0mm plain float glass to be fixed with help of teak wood beadings. The Door is to be fixed to existing wooden partition/wall with heavy duty 5" Stainless Steel hinges, and shall have godrej Or equivalent mortice lock. All the edges of the door to be covered with 35 x 12 mm Teak wood beadings, The cost shall include Frame of 1st class Teak wood Frame of 150mm x 50 mm, all labour, materials, mortice lock, tower bolt inside, door stopper, Door Closer strictly as per the given design & drawing etc complete.

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. ( The make quality and colour of paint should be got approved by the executive Engineer before use on works.)

Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure

Shrubs, Hedges, Shrubbery and Groundcover Plantation : Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m, lift up to 1.5m complete. Hedges

Shrubs, Hedges, Shrubbery and Groundcover Plantation : Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m, lift up to 1.5m complete. Shrubs

Providing well grown Creepers with Pot, Creepers with healthy, vigorous, free from diseases and pests, well-developed and healthy root systems is essential with good soil and required manure. Rate includes wires, nets for the creepers to crawl around the aluminium pergola. Density of pergola minimum 10 nos per rm. Rate includes maintenance till handover.

Providing well grown trees with minimum average girth of 10 cm and minimum height of 5 M above finished level after plantation of specified variety , at desired location & at specified distances. Achieving finished grade level. Planting the tree with appropriate anchoring, levelling the top soil surface as specified after plantation, staking to balance the tree. Including transport to the site & planting , preparation of tree basin, watering & maintaining for 1 month after completion of plantation and replacement of casualties till 1 month.

Providing, Fixing,Testing & Commissioning of Drip Pipe irrigation system with all necessary fittings, pumps and related civil works, including all labours, all complete

Supply and installation of Powder coated Aluminium Louvered Pergola. Main aluminum Post of section 120 x 120 x 1.4mm with main beam of size 170 x 47 x 1.4mm, internmediate beam of size 170 x 25 x 1.4mm and louvers of size 135 x 30 X 1.2mm. Colour: Wooden Shade. Louver Spacing and Size of pergola refer the drawing

Providing and laying Precast Seating 1500mm X 890 mm 80mm thick slabs using M30 grade of concrete.Reinforced suitably to promote long use and to prevent damage during handling, transportation & erection each bench consists of 2 nos L - Shaped base support in Cement colour back height 890 mm front height 450 mm and base width 690mm and 1 nos. reinforced concrete plank in red colour of size 1500mm X 425mm X 50mm and bench top & back planks are treated with special anti - corrosive, water proof coating so as to make surfaces glossy and water proof the cost includes material cost, labour charges, transport charges etc.,as directed by Engineer-in-Charge

Providing and fixing 10 Ft height 3 Tier Big Size Garden Umbrella, Outdoor Umbrella with Double Vents, Large Patio Umbrella with Stand and 8 Sturdy Ribs

Providing and fixing Handwoven With Synthetic Rattan 4 Chairs And 1 Center Table, Non- Breakable And Easy To Handle Lightweight And Durable Long Life And Eco-Friendly, Table: Top size 90cm dia, 75cm height, Chair: Width 35cm, Depth 45cm, Height 45cm

Cost towards supply and fixing of Dismantable MS PEB Structured Kiosk as per the drawing, All MS Pipe should be painted with anti corrisive paints / Hammertone. Kiosk should have locking facility like shutter, Kiosk internally finished with bison board finished with 300 x 600mm tile. one window for each kiosk, Serving counter finished with granite top. Rate inlcudes 600 x 600mm antiskid vitrified tile for flooring.

Supply and fixing of 120Litre Heavy duty trash can with specially designed bottom for minimizing the breakage and UV protested colour from sun rays. The trash can is fitted with wheel at bottom for easy mobility. The strong lid with smooth curved upper surface for perfect fit to ensure preventing unwanted smells to escape and rain water to seep through. The rate is inclusive of transportation, laoding and unloading charges.

Supply of Compactor 1100 Litres Bin made of galvanized Sheet, thickness of 2.5 mm, side and bottom 3 mm , MS angle and MS channel and 8" heavy duty fibre wheel as directed by the department officers. The cost includes the labour charges, transportations all complete as per Engineer in Charge

GRAVEL : Supply, deliver & install 60mm thick gravel layer on bidum geotextile and gravel fix (to later detail) Bidum to be included in price

The animal Merry Go Round (MGR) should consist of ducks made up of fiber Reinforced Plastics (FRP) and MGR Frame made by Linear Low Density Polyethylene (LLDPE) of Grade -36RA045 (Food Grade Plastic) with density 963 kg/m3 .

FOUR SEATER ARC SWING : bended & welded together to form a strong frame to withstand both the pitching & yawing moment. The with a flange & ISA 80NB pipe is hot dip galvanized pipe of height 2900mm conforming to IS 1239 with GI thickness of 60μ.

MULTI SEATER SEE-SAW - See Saw should be conforming to EN 1176-6:2008 for safety requirements for free height of fall. Ergonomically designed Rotational Molded seat should be 300mm x 190 x 70mm. See Saw Lever should be made from 80NB Galvanized Pipe conforming standards IS 1239 with strong load carrying capacity. See Saw stand should be with special Nylon-6 bush enclosed in a seamless pipe hinged to 50NB Support pipe. The stand is fixed with ISA for strong foundation grip.

MULTILANE SLIDE

GARDEN SWING

Playing Sand - The sand will be from a natural uncrushed source with sub-angular to sub-rounded grains free of any friable or agglomerated grains. The sand will be resistant to degradation during normal handling, placing and commissioning works.

PLUMBING WORKS: Supplying & fixing in position 15 mm dia brass/ C.P screw down / C.P Pillar Tap (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work). 15mm dia CP Pillar Tap (IWC)

Supplying, laying and jointing CPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. (Above Ground Level) (Internal Water supply). 20mm Dia Cpvc Pipes

Supplying, laying and jointing CPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. (Above Ground Level) (Internal Water supply). 25mm Dia Cpvc Pipes

Supplying and fixing in position the best quality and variety sizes PVC Soil/ Waste /Rain water pipes 6Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the dismantled portions to the original condition complying with standard specification. (Internal,External&Rain water system) 110mm Dia

Supplying and fixing in position the best quality and variety sizes PVC Soil/ Waste /Rain water pipes 6Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the dismantled portions to the original condition complying with standard specification. (Internal,External&Rain water system) 75mm Dia

WATER SUPPLY SYSTEM ( PIPES & VALVES): Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, PVC clamps and screws, making good the dismantled portions to original condition with necesscary brick work and plastering wherever necessary scaffolding charges above ground level upto 4 m height. (Internal,Terrace&External Water supply ). 32 mm Dia Upvc Pipe

Supplying & fixing in position first quality & approved variety of various dia Gun metal Gate valves ( Heavy type ) with I.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements. 32 mm Dia

Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete. Internal Toilet Entry & Terrace 32 mm Dia

Supplying & fixing in position C.I.Nahini trap /Floor trap of various sizes with best stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes as directed etc., complete, complying with standard specification (The C.I.Nahini trap should be got approved by the Executive Engineer before use on works ).

Supplying and fixing Back Inlet Urinal(white colour) of Jauqar Make with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple, and suitable screws, shellac etc., complete. The rate including cost of all materials, labour charges for fixing and transportation etc. completed as directed by Engineer-in-Charge. URS-WHT-13253N

Supply and fixing in position white European Water Closet of Jaquar make with Soft close double flapped seat cover, pan connector with comprising the P- trap/"S" trap, C.P brass hinges and including labour, all fittings, making the required size including cutting the wall, and fixing the flushing cistern properly, redoing the plastering and packing the wall with smooth finish, the side gap between EWC mouth and pan connector to be filled with silicon sealant etc.complete, complying with standard specification and as directed by the Department officers. The quality and make of EWC should be got approved by Concern department Engineer before use on work. complete complying with standard specification and as directed by the Departmental officers KUS-WHT-35851S300UF

Wash Hand Basin of size 565 x 425 x 140 mm with all accessories such as 32 mm Dia C.P. Waste coupling, Rubber plug, Bottle Trap, Silicon, White Cement etc., KUS-WHT-35935

Supplying and fixing in position Mirror of size 900x750mm of approved quality and brand of size with necessary plastic back PVC frame with bottom stand of approved color with brass screws rowel plugs etc complete complying with standard specification and as directed by the Departmental officers The quality of mirror should be got approved by the Executive Engineer before use on work

Supplying and fixing the best quality approved make of bip cock with C.P health faucet wall hook one metre long fixable tube,angle cock with wall flangle including cutting and making good the walls whewrever requred etc complete, complying with standerd specification and as directed by the department officers. the quality and make of health faucet should be got approved by concern department Engineer before use on work.

Supply , installing, Testing & commissioning 15mm nominal bore CP brass angle valve of approved make or equivalent as directed by the Engineer-in-charge.

Supplying and fixing best approved best quality Soap Dispenser complete complying with standard specifications. (The soap Dispenser should be got approved by Executive Engineer before use on works).

Supplying and fixing approved best quality aluminium anodised towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

ELECTRICAL WORKS: Supply and fixing of 7 segment 12 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 12 ways in one segment) (3 x 12 ways in each segment) and seperate provision for MCB / Isolators ( totally 36 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. (Without ELCB).

Supply and fixing of 8way Single pole and neutral MCB sheet steel enclosure with IP 42 protection distribution board double door with 1no. 32A DP MCB as incoming and 6Nos of 10A SP MCB for Outgoing in flush with wall and making good of the concealed portion with earth connection only The MCB DB and MCB's should be with ISI mark. ( Like MDS / Legrand make ) (SD-167)

Supply and Clamping of 4C x 120 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-225)

Supply and Clamping of 2C x 10 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-216)

Supply and fixing of brass cable gland for 2C x 10 Sq.mm PVC LTUG armoured cable with earth connection ( SD - 182)

Supply and fixing of 300 mm (12") sweep (heavy duty) AC exhaust fan complete with provision of holes in the wall including all required accessories. (SD 114)

Supply & Installation of concealed / ressessed/ surface light point/ fanpoint/ callbell point wiring using 600V FR grade 2R (P+L) x 1.5 Sq.mm for Raw Power & 1.5mm for UPS with copper conductor PVC insulated wires pulled through heavy gauge PVC conduits including Circuit Wiring from Lighting DB / Panel to Each Switch Board. Note- 1 (one) circuit/line should be covered two counter. Primary light points including the cost of 5A switch

Supply & Installation of concealed / ressessed/ surface light point/ fanpoint/ callbell point wiring using 600V FR grade 2R (P+L) x 1.5 Sq.mm for Raw Power & 1.5mm for UPS with copper conductor PVC insulated wires pulled through heavy gauge PVC conduits including Circuit Wiring from Lighting DB / Panel to Each Switch Board. Note- 1 (one) circuit/line should be covered two counter. Secondary light points looped from the above point

Supply & Installation of concealed / ressessed/ surface light point/ fanpoint/ callbell point wiring using 600V FR grade 2R (P+L) x 1.5 Sq.mm for Raw Power & 1.5mm for UPS with copper conductor PVC insulated wires pulled through heavy gauge PVC conduits including Circuit Wiring from Lighting DB / Panel to Each Switch Board. Note- 1 (one) circuit/line should be covered two counter. 5A plug point as primary point independent mounted on wall / partition / on work station, etc.

Wiring with 2R x 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Light / Fan point.(6Points / Coil) Lower end (SD 314)

Supply and run of 2 of 2.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection 1 of 1.5sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade and making good of the concealed portion with suitable colour.

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe in wall and ceiling with continuous earth wire connection 1 of 2.5 sqmm (36 /0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade and making good of the concealed portion with suitable colour. (SD-430)

LIGHTING: Supply, installation, testing and commissioning of LIGHT POLES:(i) Steel tubular poles with base plate of size 300x300x6mm welded at bottom, necessary hole for cable entry and earthing stud welded at standard height including painting . Fabricated pole shall be made form Galvanized Iron (GI) pipes or mild steel (MS) pipes The pole shall be complete with cap and base plate, Light pole suitable to accommodate Post top luminaire.Hollow pole of thickness not less than 2.3 mm. Earthing terminals for earth connection. Cable will be terminate at luminaire through hollow pole.Pole is black/grey in colour having corrosion resistance coating on it. Suitable for outdoor application. Height : 4.5-5 mtr,Top dia: 76 mm, Bottom dia: 140mm

100W LED Street Light Fixture (BRP409 LED115 CW SLC FG PSU GR V2) with dimmable driver

200W LED Four sided Flood Light Fixture for High Mast

Supply, installation, testing and commissioning of BOLLARD: Outdoor type, Integral LED lamp, Decorative, Luminaire: Non corrosive Aluminium, Aluminium plate for bolting onto foundation. Robust Design, High Luminous efficiency at reduce wattage , Cable entry for main supply cable. Earthing connection provision shall be provided. Minimum protection of IP 54. Operate on 240V, 50 Hz AC supply. Earthing terminals for earth connection, Rating: 7W LED

Supply, installation, testing and commissioning of UPLIGHT:, Landscape luminaries for direct spot light. Luminaire with arrangement of connecting cable and bracket for permanent installation on wall or ceiling or landscape area.Suitable for outdoor application.Contain Clear tempered safety glass diffuser. Swivel range in horizontal axis. Earthing terminal for earth connection.Prewired LED driver Suitable for operation on 230V, 50Hz AC supply, Rating: 6W LED, Two way connector ( IP 67)

Supply, installation, testing and commissioning of DOWN LIGHT: Luminaire made with Non corrosive Aluminium frame,Toughen clear glass diffuser. Suitable for wall mounting. Aluminium base for mounting on wall, Integral LED lamp with power supply connection cable arrangement outside the luminaire. Earthing terminal for earth connection. Suitable of outdoor use. Prewired LED driver, Suitable for operation on 230V, 50Hz AC supply Rating: 5WLED

ELECTRICAL CABLE: Supply of 2C X 16 sqmm, Al, PVC cable

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 2 X 16 sq.mm (22mm)

EARTHING: Supply and installation of earth pipe electrode as per IS 3043 complete with 3mtr long with 40mm dia 'B' class G.I. pipe Including 750mm x 750mm x 3mtr long excavation and construction of 850mm x 850mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm x 10mm cast iron / RCC cover with frame and lockable facility. The plate electrode shall be filled with alternate layer of salt and charcoal as required full depth. The Cover shall be heavy duty to suit heavy vehicle movements: (2 per mast is mandatory, 1 for lightning and one for electrical).Supply of control panel housing/feeder pillar suitable timer contractor circuit for Automatic switch ON and switch OFF of the mast at a pre-set time with acessories. ( Make: Philips )

Supply and installation maintenance free Copper Earthing System comprising of 30mm dia and 3 mtr. long earth electrode with chemical filling.

Supply and Run of 8mm Copper Round Conductor complete as necessary clamps / supports on wall / floor / ground for earth connection

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. ( SD-233)

Supply, fabrication, of Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with bitumen paint including accessories wooden plugs, screws, fastener etc., 50mm x 6mm GI Flat

CCTV: Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection) ● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB, ● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. (Make: Dahua/Panasonic)

Supply and Laying of CAT 6 armoured cable in 50mm dia HDPE pipe below the ground complete with all necessary accessories etc.. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

Please Enable Macros to View BoQ information