Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹46.3 L
EMD Value
₹92,700
Closing Date
17 Nov 2026, 12:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
ELTD
12 conditions · 1 needing a document upload
ELECTRICAL CONTRACTOR LICENSE (Mandatory)- For participating intenders for a work in any state the Contractors shall have to possesselectrical license of appropriate voltage issued by any State Govt. underClause 45 of compilation of rule of Indian Electricity Rules 1956 or asamended from time to time and a copy of the same should be submittedalong with the offer. They shall keep valid license throughout the periodof execution of work by getting it renewed at suitable intervals andsubmit an attested copy of the same to the Railways after each renewal.In the event of any discontinuity in validity of electrical license of thecontractor, its authority to work with Railways will also automaticallycease to be valid.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
10 conditions · 3 needing a document upload
As per Tender Condition mentioned in Tender Document.
As per Tender Condition mentioned in Tender Document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Supply, installation, wiring and testing with improvement in safety intermediate termination and cord-end termination of over current protection system at contactor at Lower Parel Workshop.
EL-WA-PL-2026-27-25~WR
EL-WA-PL-2026-27-25
Open
Works - General
90 Days
Mumbai, Maharashtra
₹0
₹92,700
17 Oct 2026
17 Oct 2026
3 Nov 2026
11 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 46,32,986.45 | ||
| — | 470.00 | — | — | ||
| Supply and testing with end termination, intermediate termination and cord-end termination of over current protection system along with full end termination along with residual current protection operated on 230V AC supply with load current 20A conforming to IS 12640 (Part 2) :2008 IEC61009-1:1996 or latest with bimetallic terminal connector suitable for 16 dia. Aluminum tubular bus bar for 20A copper palm Copper Cu ETP CW 0041A and Aluminum barrel Aluminum AL 99.5 cable connector temperature resilience, corrosion resistance size: 16 sq.mm confirming to IS: 5561-1970 with maximum temperature rise of 90 degree Celsius. Material shall be confirmed to designation A6 of IS: 617-1959. Breaking 1 Resistance for Barrel 85 N/M SQ M and for palm 225 N/M SQ M with Stretching A5% for barrel must be for palm 16 with earth protected 20A, 240V, two pin industrial plug with socket confirming to IEC 61439-3 with flush mounting and surface mounting MS Box with cord end termination suitable for copper cable of conductor size 1.5 sq.mm with cord-end termination, manufactured out of EC grade aluminum extruded extension tubes of minimum purity 99.5% and conductivity not less than 60% IACS, designed and fabricated strictly in accordance with IS:5082 specifications, duly conforming in all respects to IS:2121 Part-I & II and IS:2544 with provision for sustaining continuous operating temperature up to 120 °C under specified service conditions. | — | — | — | 33,83,530 | |
| — | 175.00 | — | — | ||
| Supply, installation, testing & commissioning of DP RCCB (Type A) of capacity 16A to 25A, and 30mA Sensitivity | — | — | — | 5,17,641.25 | |
| — | 150.00 | — | — | ||
| Supply, installation, testing & commissioning of DP RCCB (Type A) of capacity 32A to 40A, and 30mA Sensitivity | — | — | — | 4,39,119 | |
| — | 60.00 | — | — | ||
| Supply, installation, testing & commissioning of FP RCCB (Type A) of capacity 63Amp, and 100mA Sensitivity | — | — | — | 2,27,518.2 | |
| — | 135.00 | — | — | ||
| Supply, installation, testing & commissioning of CRCA sheet metal enclosure for DP/FP RCCB | — | — | — | 65,178 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022.pdf
ATTACHMENT
ALLACS.pdf
ATTACHMENT
TDEL-WA-PL-2026-27-25.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .