REPAIR TO JOINERY, PLINTH PROTECTION, HARD STANDING, FLOORING AND PATH AND REPAIR TO LEAKAGE SEEPAGE, INTERNAL WATER SUPPLY AND PLUMBING AT AF STN DADRI AND AOR OF GE (AF) FARIDABAD

Amount

M&L precast cement concrete type-B1 1:2:4 by using 20 mm graded crushed broken stone aggregate, in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings set in cement mortar 1:4 or complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frame n.exc. 1.50 sqm each with shutters (with out taking off shutter from the frame) and removing from the site complete all as specified and directed by Engineer-in-Charge.

All as per Sl item 2 above but exc 1.50 sqm and n.exc 4.00 sqm each (with out taking off shutter from the frame) and removing from the site complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description n.exc. 1 sqm each and removing from the site complete all as specified and directed by Engineer-in-Charge.

All as per ser item No 04 but exceed 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.

S&F in repair Framed work as in doors, for door frames or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing (Fe-410- W(Gde?E-250)Gde) qualty complete all as specified and directed by Engineer-in-Charge.

S&F 35 mm thick Factory made second class hard wood (rail & style) factory made plain framed panelled shutter any nos of panels with lock rail and panels of 12 mm thick veneered particle board with commercial veneering on both faces the size of rail and style as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

S&F 30 mm thick flush shutters, solid core construction with block board core and ply wood face panels commercial type on both side. Exposed edges of shutter to be provided with 6mm thick teak wood lipping. The thick ness of lipping shall be 12mm for sides on which hinges are to be provided complete all as specified and directed by Engineer-in-Charge.

S&F 35 mm thick factory made second class hard wood factory made glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. Size of members of shutters as specified in IS-1003 supplied and fitted to the chowkats complete all as specified and directed by Engineer-in-Charge.

S & F steel window & supply and fixing steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with guard bars glazing dovetailed or welded complete all as specified and directed by Engineer-in-Charge.

All as per item No 10 above but without glazing bars complete all as specified and directed by Engineer-in-Charge.

S & F Mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintel hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps,plate washers and similar small articles conforming to Fe-290 Gde- E-165 complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed by Engineer-in-Charge and as shown on drawing. (Note:- Door frame shall bewater proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F sheet glass 3 mm thick ordinary quality and fixed with oil putty / wooden beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Stainless steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned teaks galvanised wire staples fixed including a coat of French blue paint complete all as specified and directed by Engineer-in-Charge.

S&F Mild steel barrel tower bolts stove enamelled black with bright bolt of size 150 mm complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodized barrel tower bolts of extruded section 150 mm long complete all as specified and directed by Engineer-in-Charge.

S&F mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolts plate and two on staple plate in wooden shutters and welded/riveted in steel shutters (250 mm long) complete all as specified and directed by Engineer-in-Charge.

S&F butt hinges medium weight cold rolled mild steel 100 mm size complete all as specified and directed by Engineer-in-Charge.

S&F 150 mm size mild steel pressed handle oval type stove enamelled black complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium handles cast type anodized of 150 mm size complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium tower bolt cast type anodized of 150 mm size complete all as specified and directed by Engineer-in-Charge.

Taking down old Aluminium door shutters including floor spring of shutter size exc.1.5 sqm but not exc. 4.00 sqm and M&L for complete overhauling of the floor spring and pivot replacement of glass pane/rubber gasket/aluminium glazing clip if necessary incl.necessary screwing and adjustment etc and refixing in same location complete all as specified and directed by Engineer-in-Charge. Note :- Glass Pane/rubber beeding/aluminium beeding will be measured and paid separately under subsequent items.

S&F in repair for double action floor spring hudraulically regulated make up of minimum 150mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass otaher parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs aluminium pivet with plate size 25 mm x 65 mm and sutable for shutter of 30 mm thk complete all as specified and directed by Engineer-in-Charge.

S & F in repair rubber beading to be fixed over glass panes in Aluminium doors complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair aluminium anodised glazing clip to the aluminium door frames after fixing the glass panes complete all as specified and directed by Engineer-in-Charge.

S&F forsted/tinted 5.5 mm thick ordinary quality and fixed with Aluminium glazing clips, Rubber Beading and with oil putty / wooden beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F powder coated aluminium frames for doors,windows,ventilators & partitions with one or more rebates including jointing cleat for fixing and suitable aluminium poweder coated handles, tower bolts and door stopers including fixing to floor with suitable screws/fasteners in partiton etc complete all as specified and directed by Engineer-in-Charge.

M & L for 12mm thick both sides prelaminated Particle board, exterior grade, fixed with screws to timber frame work in cup board shutters/ shelves and in partitions complete all as specified and directed by Engineer-in-Charge.

S&F Mortice lock aluminium size of 75 mm 4 lever complete all as specified and directed by Engineer-in-Charge.

Demoltion of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness ( below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L 75 mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, 40mm thick as in floors, finish the surface even & smooth without using extra cement including neccessary joints complete all as specified and directed by Engineer-in-Charge.

S&F in repair 18/19 mm thick block board grade two quality interior grade, commercial type fixed with screw or nails to timber frame work as cup board shelves / partition / drawers complete fixed in repairs exposed edges of block board to be provided with 6mm thick teak wood lipping all around complete all as specified and directed by Engineer-in-Charge.

S&F in repair 25mm thick flush shutters solid core construction, core and plywood faced panels decorative type veneers faces. Exposed edges of shutter to be provided with 6mm thick teak wood lipping. The width of lipping shall be 12mm for sides on which hinges are to be provided complete all as specified and directed by Engineer-in-Charge.

S&F IInd class hard wood plain, solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints and fixed complete all as specified and directed by Engineer-in-Charge.

S&F butt hinges Brass 100 mm size all as specified complete all as specified and directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M/L rendering 15 mm thick cement mortar on Brick masonary surfaces or surfaces other than fair faces of brick work in cement mortar 1:4 as backing coat to glazed tile complete all as specified and directed by Engineer-in-Charge.

M&L for digital glazed ceramic tiles coloured size 300 x 450/300 x 250 7 mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M&L for 600mmx600mmx10 mm thick vetrified Light shade ceramic tiles shade as approved flooring( in any pattern) and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and directed by Engineer-in-Charge.

S&F in repair Curtain rod Stainless steel 25 mm dia 1mm thick with pairs of fixing fancy type brackets heave grade, Fancy type supprting stops heavy grade, rollers including screws with required accessories and finishing the surface with existing wall surface etc complete all as specified and directed by Engineer-in-Charge.

S&F joist channel angle, tee section, MS pipe, MS square tube ,bars , MS plate all structrual steel work fixed in purlin rafter cleat, support etc incl welding, riveting etc conf to Fe-410 Gde E-250 complete all as specified and directed by Engineer-in-Charge.

S&F retro reflective sheeting , high intensity of visibility of retro reflective & symbols, writing of letters in Hindi / English white colour letters with back ground in green / blue colour including fixing to existing sign boards with using of suitable gum/chemical complete all as specified and directed by Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings etc complete all as specified and directed by Engineer-in-Charge.

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/clading to wall, molding/folding in circular/semicircular of any position and height fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/clading to wall, molding/folding in circular/semicircular of any position and height fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F in repairs fibre glass reinforced translucent plain sheet 2mm thick fixed with L- type or J- type or cranked hook bolts complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed by Engineer-in-Charge.

S&F in repair steel rolling shutters, of thickness 1mm with ball bearing for rolling as specified including top cover, anchoring rod, haps and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type including roller for moving of gate complete all as specified and directed by Engineer-in-Charge.

M&L for oiling and greasing without taking out including two coat synthetic enemalled paint on rolling shutters as specified including top cover, anchoring rod, hasp and staple complete all as specified and directed by Engineer-in-Charge.

S&F interlocking aluminium powder coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Tee 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm complete all as specified and S&F Water Resistance glass fibre reinforced Gypsum board of 12 mm thick for ceiling complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

S & F in repair door closer hydraulically regulated designation No. 2 universal type of aluminum body fixed to door frames with screws or by welding suitable for door shutters of 701 to 1000 mm in width and weight between 36 to 60 kg complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L preparation of new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel water tubing and connection incl cleaning for refixing or removal to stores for following bore complete all as specified and directed by Engineer-in-Charge. :- (a) 15mm

All as per item No 61 above but 20mm complete all as specified and directed by Engineer-in-Charge

S&F GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor in following bore of tube complete all as specified and directed by Engineer-in-Charge :- (a) 15mm

All as per item No 63 above but 20mm complete all as specified and directed by Engineer-in-Charge

S&F in repair 20 mm Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed in repair and complete all as specified and directed by Engineer-in-Charge

S/F in repairs 15 mm angle valve chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make complete all as specified and directed by Engineer-in-Charge

S/F in repairs 15 mm two way angle valve chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make complete all as specified and directed by Engineer-in-Charge

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge as per SSR Pt- I

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge as per SSR Pt- I

S& Fix in repair 15 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair and complete all as specified and directed by Engineer-in-Charge

S&F in repair 20mm bore Ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair and complete all as specified and directed by Engineer-in-Charge

S & F in repair 15mm chromium plated swivel shower rose with or without swivel joints sny size for fixing with 15 mm pipe incl shower arm 15 mm size , 195 mm long with bend of 45 degree complete all as specified and directed by Engineer-in-Charge

S&F in repair vitreous china wash basin white flat back size 550x400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets complete all as specified and directed by Engineer-in-Charge

S&F PVC connection 15 mm bore 450 mm in length complete all as specified and directed by Engineer-in-Charge

S&F in repairs for waste fittings,brass,chromium plated of 32 mm dia for wash basins complete all as specified and directed by Engineer-in-Charge

S&F in rapairs waste coupling of 32 mm bore(half or full threaded)suitable for wash basins complete all as specified and directed by Engineer-in-Charge

S/F in repairs 15 mm bore bib taps chromium plated cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge

S&F in repair vitreous China wash down water closet (EWC) pedestal pattern coloured incl P or ‘S’ trap coloured ,seat cover & cement concrete beddingetc complete all as specified and directed by Engineer-in-Charge

S&F in repairs for Vitreous China squatting pan,"Orissa" pattern,size 580 X440 mm white,withintegral foot rests (excluding flushing cistern and flush pipe) including connection to flushing pipe anti syphonage pipe etc complete all as specified and directed by Engineer-in-Charge

S&F PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs complete all as specified and directed by Engineer-in-Charge

S&F in repair PVC flush bend 32mm dia with two Nos check nuts for conencting low level flushing cistern to European type water closet or India type water closet incl cement joint complete all as specified and directed by Engineer-in-Charge

S&F in repair Vitreous China urinals, Half stall type white, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed by Engineer-in-Charge

S&F in repair health faucet with double lock 1 meter brass plated stainless stell flexible hose and wall hook complete all as specified and directed by Engineer-in-Charge

Demolition of brickwork /stone masonry / precast articles / jalli built in cement mortar complete all as specified and directed by Engineer-in-Charge

M&L brickwork with sub class ’B’ bricks straight or curved on plan exc.6 m mean radius built in cm 1:4 for para pet walls at Roof complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster from brick or stone masonry or concrete surfaces and hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 15 mm thick in CM 1:4 on stone masonary or surface other than fair face of brick works etc or similar surfaces etc including with mixing of water proofing liquid of Dr. fixit Qty as per manufactrer instruction complete all as specified and directed by Engineer-in-Charge

M&L 15 mm thick rendering in cm 1:6 on brick surfaces or concrete surfaces finished even and smooth without using extra cement incl mixing of water proofing liquid of Dr. fixit as per manufactrer instruction complete all as specified and directed by Engineer-in-Charge

M&L for rendering 10mm thick in CM 1:3 on concrete surface in ceillings etc including with mixing of water proofing liquid of Dr. fixit as per manufactrer instruction all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls over a coat of alkali resistant priming paint all as specified.

M&L two coat of oil bound distemper after 3mm Birla/JK wall care putty on new plastered surfaces including necessary prepararion complete all as specified and as directed by Engineer-in-Charge

M&L three coat of white wash on new surfaces on ceiling including necessary prepararion complete all as specified and as directed by Engineer-in-Charge

Taking down existing water proofing treament any nos of layers and of any description, incl.demolition and taking off PCC padding/plaster on RCC slab,also including removing of bitument coating to show the concrete surface to its true colour and roughening etc and also removing the debris outside the MOD land complete all as specified and as directed by Engineer-in-Charge

Taking down existing mud puska any nos of layers and of any description, including removing of the debrisoutside the MOD Land up to distance 250 mtr complete all as specified and directed by Engr-in - Charge.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 including macthing existing surfaces complete all as specified and as directed by Engineer-in-Charge

M&L Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) on roof padding avg. thicknessof 40mm in slope finished even and fair complete all as specified and as directed by Engineer-in-Charge

M & L for 15 mm thick Screed bed in cement mortar with integral water proofing liquid as per manufacturers instrustruction complete all as specified and as directed by Engineer-in-Charge (Note: Water proofing liquid measured sesperatly.

M & L for laying APP modified membarane with non woven polyester reinforcement mat (concrete core) not less than 3 mm thick & not less than 3.5 kg /sqm, the over the lap otching shall be 100 mm on length side & 100 mm on widthe side over a tack coat of Industrial bitumen of 1.20 kg / Sqm over Bituminious based primer IS No. 3383@ 250 gms/sqm including apply of Aluminium colour synthetic enamel paint @ 200 gms/sqm all as per manufacture's instruction complete all as specified and as directed by Engineer-in-Charge Note: Supply only integral water proofing compound shall be measured and paid separately.

Supply only integral water proofing liquid ( ISI marked) complete all as specified and as directed by Engineer-in-Charge

M&L for preparation of old previously decorated surfaces by brooming down or steel wire brushes, scrapping down smoke soot, moulds, efflorescent salts etc and applying one coat of white wash on walls complete all as specified and as directed by Engineer-in-Charge

All as per item No 100 above but on ceiling complete all as specified and as directed by Engineer-in-Charge

All as per item No 100 above but one coat of oil bound distemper on walls complete all as specified and as directed by Engineer-in-Charge

All as per item No 100 above but two coat of oil bound distemper on walls complete all as specified and as directed by Engineer-in-Charge

All as per item No 105 above but one coat cement base paint on walls complete all as specified and directed by Engineer-in-Charge.

M &L for Preperation of old Apex painted surfaces and applying One coat of external emulsion paint (Apex) complete all as specified and directed by Engineer-in-Charge.

M &L for complete removal of existing treatment and applying two coat of external emulsion paint (Apex) over a coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated wooden surfaces and applying one coat of synthetic enamel paint over 10 cm in width or girth complete all as specified and directed by Engineer-in-Charge.

All as per item No 107 above but on steel surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for applying 3mm thick wall care putty on ceiling, deep scraped surfaces or undulated surfaces in patches and making good even and smooth rubbing with sand paper etc complete all as specified and directed by Engineer-in-Charge.

M&L two coat of oil bound distemper after 3mm Birla/JK wall care putty on new plastered surfaces including necessary prepararion complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment by washing, rubbing down and stopping of distempered and painting surfaces etc and applying two coats of oil bound distemper on walls over a coat of 3 mm thick wall care putty complete all as specified and directed by Engineer-in-Charge. (Note - work shall be got executed through skilled representative of manufacture company)

M&L for complete removal of existing treatment by washing, rubbing down and stopping of distempered and painting surfaces etc and applying two coat of cement base paint on walls over a coat of alkali resistant priming paint complete all as specified and directed by Engineer-in-Charge.

S&F sink with drain board in repair made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.

S & F Stainless steel plate rack of size 900x600x450 mm Approved make complete all as specified and directed by Engineer-in-Charge.

B S ENTERPRISES

36SHRI RADHEY ASSOCIATES

PG CONSTRUCTION AND COMPANY